Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2013 Emilie Gillet.
//
// Author: Emilie Gillet (emilie.o.gillet@gmail.com)
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
// THE SOFTWARE.
//
// See http://creativecommons.org/licenses/MIT/ for more information.
//
// -----------------------------------------------------------------------------
//
// UART driver for conversing with the factory testing program.
#include "elements/drivers/debug_port.h"
#include <stm32f4xx_conf.h>
namespace elements {
void DebugPort::Init() {
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
// Initialize TX and RX pins.
GPIO_InitTypeDef gpio_init;
gpio_init.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_10;
gpio_init.GPIO_Speed = GPIO_Speed_50MHz;
gpio_init.GPIO_Mode = GPIO_Mode_AF;
gpio_init.GPIO_OType = GPIO_OType_PP;
gpio_init.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &gpio_init);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_USART1);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_USART1);
// Initialize USART.
USART_InitTypeDef usart_init;
usart_init.USART_BaudRate = 9600;
usart_init.USART_WordLength = USART_WordLength_8b;
usart_init.USART_StopBits = USART_StopBits_1;
usart_init.USART_Parity = USART_Parity_No;
usart_init.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
usart_init.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
USART_Init(USART1, &usart_init);
USART_Cmd(USART1, ENABLE);
}
} // namespace elements
08460a69aThis file is pinned to the selected release. Download the original to open it in your design tool.