Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
f9682336eThis file is pinned to the selected release. Download the original to open it in your design tool.
/*
* @Description: About API function of hardware layer
* @version: 1.3
* @Autor: lmx
* @LastEditors: lmx
*/
#include "hal_driver.h"
#include "jbd013_api.h"
// 测试添加
#include "driver/gpio.h"
#include "SPI.h"
#include <esp32-hal-gpio.h>
#include <Arduino.h>
// 引脚定义
#define TFT_CLK GPIO_NUM_4
#define TFT_CS0 GPIO_NUM_14
#define TFT_CS1 GPIO_NUM_18
#define TFT_D0 GPIO_NUM_6
#define TFT_D1 GPIO_NUM_8
#define TFT_D2 GPIO_NUM_10
#define TFT_D3 GPIO_NUM_12
/**
* @description: Delay N us
* @paran:
* @return {*}
* @author: lmx
* @param {u32} val:delay time,unit:us
*/
void delay_us(u32 val)
{
//测试添加
delayMicroseconds(val);
}
/**
* @description: Delay N ms
* @paran:
* @return {*}
* @author: lmx
* @param {u32} val:delay time,unit:ms
*/
void delay_ms(u32 val)
{
delay_us(val * 1000);
}
/**
* @description: Set spi_cs pin status
* @paran:
* @return {*}
* @author: lmx
* @param {u8} val:spi_cs pin status bit
*/
void set_spi_cs_pin(u8 val)
{
// 测试添加
//digitalWrite(5,val);
digitalWrite(33,val);
}
//测试添加
//配置QSPI
//QSPI Qspi1 = QSPI(TFT_CLK, TFT_D0, TFT_D1, TFT_D2, TFT_D3, TFT_CS0);
/**
* @description: Send a byte of data
* @paran:
* @return {*}
* @author: lmx
* @param {u8} param:Data sent
*/
void spi_tx_byte(u8 param)
{
// 测试添加
// 使用SPI设备发送数据
//SPI.transfer(param);
SPI.write(param);
//SPI.endTransaction();
}
/**
* @description: Receive a byte of data
* @paran:
* @return {u8}:Received data
* @author: lmx
*/
u8 spi_rx_byte(void)
{
// 测试添加
uint8_t data = SPI.transfer(0x00); // 发送一个空字节来接收数据
//SPI.endTransaction();
return data;
}
/**
* @description: Write a byte of data
* @paran:
* @return {*}
* @author: lmx
* @param {u8} param:Data written
*/
void spi_wr_byte(u8 param)
{
set_spi_cs_pin(SET_LOW);
//digitalWrite(5,0);
spi_tx_byte(param);
//digitalWrite(5,1);
set_spi_cs_pin(SET_HIGH);
}
/**
* @description: Read a byte of data
* @paran:
* @return {u8}:Data read
* @author: lmx
*/
u8 spi_rd_byte(u8 cmd)
{
u8 ret;
set_spi_cs_pin(SET_LOW);
spi_tx_byte(cmd);
ret = spi_rx_byte();
set_spi_cs_pin(SET_HIGH);
return ret;
}
/**
* @description: Write multiple bytes data
* @paran:
* @return {*}
* @author: lmx
* @param {u8} cmd:SPI instruction of JBD013VGA panel
* @param {u8} *pBuf:Pointer to write data
* @param {u32} len:Length of data written
*/
void spi_wr_bytes(u8 cmd, u8 *pBuf, u32 len)
{
u32 i;
set_spi_cs_pin(SET_LOW);
spi_tx_byte(cmd);
for (i = 0; i < len; i++)
{
spi_tx_byte(pBuf[i]);
}
set_spi_cs_pin(SET_HIGH);
}
/**
* @description: Read multiple bytes data
* @paran:
* @return {*}
* @author: lmx
* @param {u8} cmd:SPI instruction of JBD013VGA panel
* @param {u8} *pBuf:Pointer to receive data
* @param {u32} len:Length of received data
*/
void spi_rd_bytes(u8 cmd, u8 *pBuf, u32 len)
{
u32 i;
set_spi_cs_pin(SET_LOW);
spi_tx_byte(cmd);
for (i = 0; i < len; i++)
{
pBuf[i] = spi_rx_byte();
}
set_spi_cs_pin(SET_HIGH);
}
/**
* @description: Read data from the panel cache
* @paran:
* @return {*}
* @author: lmx
* @param {u16} col:The starting column address of the display area(0~639)
* @param {u16} row:The starting row address of the display area(0~479)
* @param {u8} *pBuf:Pointer to receive data
* Gray:It is the gray data of pixel, which is composed of 4 bits
* pBuf[N] = GrayN << 4 | GrayN+1
* @param {u32} len: Length of received data(MaxLen=640*480/2=153600)
*/
void spi_rd_cache(u16 col, u16 row, u8 *pBuf, u32 len)
{
u32 i;
u32 addr;
addr = ((row & 0x1ff) << 10) | (col & 0x3ff);
set_spi_cs_pin(SET_LOW);
spi_tx_byte(SPI_RD_CACHE); // CMD
spi_tx_byte((u8)(addr >> 16)); // Addr
spi_tx_byte((u8)(addr >> 8)); // Addr
spi_tx_byte((u8)(addr)); // Addr
spi_tx_byte(0xff); // Dummy
for (i = 0; i < len; i++) // Pixel data
{
pBuf[i] = spi_rx_byte();
}
set_spi_cs_pin(SET_HIGH);
}
/**
* @description: Write data to the cache in the panel
* @paran: The data of a pixel is 4 bits, so the minimum number of changed pixels is 2
* @return {*}
* @author: lmx
* @param {u16} col:The starting column address of the display area(0~639)
* @param {u16} row:The starting row address of the display area(0~479)
* @param {u8} *pBuf:Pointer to write data
* Gray:It is the gray data of pixel, which is composed of 4 bits
* pBuf[N] = GrayN << 4 | GrayN+1
* @param {u32} len: Length of send data(MaxLen=640*480/2=153600)
*/
void spi_wr_cache(u16 col, u16 row, u8 *pBuf, u32 len)
{
u8 tmpData;
u32 i;
u32 addr;
u16 eCol;
u16 eRow;
eCol = col + (len * 2) % 640;
eRow = row + (len * 2) / 640;
spi_rd_cache(eCol, eRow, &tmpData, 1);
addr = ((row & 0x1ff) << 10) | (col & 0x3ff);
set_spi_cs_pin(SET_LOW);
spi_tx_byte(SPI_WR_CACHE); // CMD
//spi_tx_byte(SPI_WR_CACHE_QSPI); //测试修改
spi_tx_byte((u8)(addr >> 16)); // Addr
spi_tx_byte((u8)(addr >> 8)); // Addr
spi_tx_byte((u8)(addr)); // Addr
spi_tx_byte(0xff); // Dummy
for (i = 0; i < len; i++) // Pixel data
{
spi_tx_byte(pBuf[i]);
}
spi_tx_byte(tmpData); // Write endPiexl gray and 4bit dummy data (Dummy data can be any value)
set_spi_cs_pin(SET_HIGH);
}
/**
* @description: Read the data of the temperature sensor inside the panel
* @paran:
* @return {*}
* @author: lmx
* @param {u8} sensorId:Temperature sensor ID(Range:0~3)
* @param {u8} *pBuf:Data buf
* @param {u16} len of pbuf(More than 2000 recommended)
*/
void spi_rd_temperature_sensor(u8 sensorId, u8 *pBuf, u16 len)
{
u16 i;
set_spi_cs_pin(SET_LOW);
spi_tx_byte(SPI_RD_TEMP_SENSOR); // CMD
spi_tx_byte(sensorId); // sensorId
spi_tx_byte(0); // dummy data
spi_tx_byte(0); // dummy data
for (i = 0; i < len; i++) // Data buf
{
pBuf[i] = spi_rx_byte();
}
set_spi_cs_pin(SET_HIGH);
}