Loading project Things
README.mdView source
E80-1800
QMK compatible USB-C PCB for a Cherry G80-1800
The board has been prototyped and works as intended, while fitting most G80-1800 housings. Rev 1.1 and later should fix all tolerance issues, and fit all G80-1800 (and as far as I know also G81-1800) enclosures. I can, however, not guarantee perfect operation of the PCB or compatibility with every enclosure variation - if you encounter any issues, please let me know. Rev 1.2 has not yet been tested, but changes were minimal - no issues are to be expected. Stock situations as well as component rotations at JLC may change over time and hence I can not guarantee for the BOM/CPL files to work perfectly. Please double-check before ordering!
 |  |
|---|
Order information at JLCPCB
All relevant files can be found in E80-1800-pcb-universal\jlcpcb. The gerber subfolder contains a .zip file, the assembly subfolder contains the BOM and POS/CPL files needed for assembly. Please double-check all component values and rotations before ordering!
Since jlcpcb usually fails to auto-determine the PCB dimensions: 382 x 160 mm is the correct size.
Consider donating me a few bucks if you order boards :)
Features
- USB-C (you have to widen the cable hole in the case with a file or similar)
- Full ESD protection
- Future-proof STM32F072 with QMK
- Optional I²C OLED screen in the card-reader-hole on card-reader G80-1800 models
- SPI header for Bluetooth LE - software support may or may not follow (currently not supported by QMK). The SPI pads can also be used for other expansions such as adding a Solenoid or RGB stripe.
- Header to connect an optional battery management daughterboard
- Single color dimmable backlight (3mm LEDs)
- Silkscreen labels for LED polarity and multi-layout options for easier assembly
The board is fully supported by the QMK master branch: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ebastler/e80_1800 A VIA compatible JSON file can be found in the "VIA" folder of this repo, and the PCB is also fully supported by https://remap-keys.app
Supported layouts
The PCB was designed to support all layout options G80-1800 and G81-1800 were originally available in. I did not include layout options that go beyond those on purpose, since overlapping switch holes lead to wobbly switches (remember, the G80 boards are plateless!) which diminishes the typing experience.
- Full ISO and ANSI support
- 1 - 1 - 1 - 6 - 1 - 1 - 1 - 1 bottom row (with flipped or regular spacebar)
- 1.5 - 1.5 - 7 - 1.5 - 1.5 bottom row
- Stepped and regular caps lock
Thanks to
- Evy for supplying me with her GH80-1800 drop in replacement PCB layout, which I could use for dimensions and measurements - saved me a lot of time! Even if I ended up redrawing the dimensions from scratch and changing a few, being able to use his as a starting point was a lot of help.
- SMOKEY for motivating me once I lost the will to continue with the project
- MarvFPV for helping me with the physical PCB dimensions and supplying me with valuable ideas
- Zitres for organizing and shipping a small-batch closed GB together with me that led to a lot of satisfied users