Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
283429736This file is pinned to the selected release. Download the original to open it in your design tool.
# dìyījí
**dìyījí** (第一级)is an open source audio-monitor stand for you desk. It incorperates monitors into becoming two tiny desks, maybe addind a another, a first floor to your desk, while improving your audio experience. The monitor and wooden top plate are vibration-decoupled through thin rubber linings to no obstruct audio. *dìyījí* can be 3D printed and comes as a customizeable OpenSCAD script. Slanting-angle and edge-radius are available as global variables, allowing fast adaptation.
<table>
<tbody>
<tr>
<td>
<img src="images/955a7b841d746bfc.jpg"/>
</td>
<td>
<img src="/images/01b418ecd8236f54.jpg"/>
</td>
</tr>
<tr>
<td colspan="2">
<img src="images/96cfdd658ee7931f.jpg"/>
</td>
</tr>
<tr>
<td colspan="2">
<img src="images/Screenshot from 2024-05-25 00-38-00.png"/>
</td>
</tr>
<tr>
<td>
<img src="images/Screenshot from 2024-05-24 23-43-32.png"/>
</td>
<td>
<img src="images/Screenshot from 2024-05-24 23-45-59.png"/>
</td>
</tr>
</tbody>
</table>
## Notes
- *dìyījí* has been designed for and printed on a Prusa Mini+
- it can be fully printed with no support structure
- the script adds 1mm clearance for ~1-1.5mm thick rubber lining, such can be bought at hardware stores
- please add two stripes of the lining to the inside, also following the bend part
- please also add rubber strips to the two desk-touching parts
- everything is held together by gravity, print the parts, add rubber lining, assemble and let gravity do the rest
- you can leave out the upper parts if you not desire to put something ontop
