Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
Shield outline for the WeMos D1 Mini
====================================
Copyright 2016 SuperHouse Automation Pty Ltd
SuperHouse site: www.superhouse.tv
SuperHouse email: info@superhouse.tv
A blank shield for the [WeMos D1 Mini][1] and other compatible boards
based on the same header format. This is intended to be used as a skeleton
for creating other shields, to save time creating the shield shape and
header locations.
Features:
* Alignment notch near D1 Mini reset button.
* Pin labels top and bottom.
* Top and bottom ground planes.
More information is available at:
http://www.superhouse.tv/d1msho
INSTALLATION
------------
The design is saved as an EAGLE project. EAGLE PCB design software is
available from www.cadsoftusa.com free for non-commercial use. To use
this project download it and place the directory containing these files
into the "eagle" directory on your computer.
DISTRIBUTION
------------
The specific terms of distribution of this project are governed by the
license referenced below.
LICENSE
-------
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL).
The "license" folder within this repository also contains a copy of
this license in plain text format.
[1]: http://www.wemos.cc/wiki/doku.php?id=en:d1_mini
5c099d9a9This file is pinned to the selected release. Download the original to open it in your design tool.