Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
6033d2b1bThis file is pinned to the selected release. Download the original to open it in your design tool.
# Copyright 2024 OpenHW Group and Dolphin Design
# SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
#
# Licensed under the Solderpad Hardware License v 2.1 (the “License”);
# you may not use this file except in compliance with the License, or,
# at your option, the Apache License version 2.0.
# You may obtain a copy of the License at
#
# https://solderpad.org/licenses/SHL-2.1/
#
# Unless required by applicable law or agreed to in writing, any work
# distributed under the License is distributed on an “AS IS” BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
set synopsys_auto_setup true
set verification_failing_point_limit 0
set summary_log $::env(summary_log)
set top_module $::env(top_module)
set version $::env(version)
set pulp_cfg $::env(pulp_cfg)
set fpu_cfg $::env(fpu_cfg)
set zfinx_cfg $::env(zfinx_cfg)
set latency_cfg $::env(latency_cfg)
set core_impl_name cv32e40p_core_COREV_PULP${pulp_cfg}_FPU${fpu_cfg}_FPU_ADDMUL_LAT${latency_cfg}_FPU_OTHERS_LAT${latency_cfg}_ZFINX${zfinx_cfg}
if {"$version" == "v1"} {
set golden_parameter_list "PULP_XPULP = 0, FPU = 0, PULP_ZFINX = 0"
set core_ref_name cv32e40p_core_PULP_XPULP0_FPU0_PULP_ZFINX0
} else {
set golden_parameter_list "COREV_PULP = $pulp_cfg, FPU = $fpu_cfg, ZFINX = $zfinx_cfg, FPU_ADDMUL_LAT = $latency_cfg, FPU_OTHERS_LAT = $latency_cfg"
set core_ref_name $core_impl_name
}
read_sverilog -container r -libname WORK -12 -f golden.src
set_top r:/WORK/$top_module -parameter $golden_parameter_list
read_sverilog -container i -libname WORK -12 -f revised.src
set_top i:/WORK/$top_module -parameter "COREV_PULP = $pulp_cfg, FPU = $fpu_cfg, ZFINX = $zfinx_cfg, FPU_ADDMUL_LAT = $latency_cfg, FPU_OTHERS_LAT = $latency_cfg"
match > $summary_log.match.rpt
if {"$top_module" == "cv32e40p_core"} {
set_dont_verify_point -type port r:/WORK/$core_ref_name/apu_req_o
set_dont_verify_point -type port r:/WORK/$core_ref_name/apu_operands_o*
set_dont_verify_point -type port r:/WORK/$core_ref_name/apu_op_o*
set_dont_verify_point -type port r:/WORK/$core_ref_name/apu_flags_o*
set_dont_verify_point -type port i:/WORK/$core_impl_name/apu_req_o
set_dont_verify_point -type port i:/WORK/$core_impl_name/apu_operands_o*
set_dont_verify_point -type port i:/WORK/$core_impl_name/apu_op_o*
set_dont_verify_point -type port i:/WORK/$core_impl_name/apu_flags_o*
set_dont_verify_point -type port i:/WORK/$core_impl_name/apu_busy_o
}
verify > $summary_log
report_passing_points > $summary_log.passing_points.rpt
report_aborted_points > $summary_log.aborted_points.rpt
report_failing_points > $summary_log.failing_points.rpt
exit