Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2018 ETH Zurich and University of Bologna.
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
// Wrapper for a fpnew
// Contributor: Davide Schiavone <davide@openhwgroup.org>
module cv32e40p_fp_wrapper
import cv32e40p_apu_core_pkg::*;
(
// Clock and Reset
input logic clk_i,
input logic rst_ni,
// APU Side: Master port
input logic apu_req_i,
output logic apu_gnt_o,
// request channel
input logic [ APU_NARGS_CPU-1:0][31:0] apu_operands_i,
input logic [ APU_WOP_CPU-1:0] apu_op_i,
input logic [APU_NDSFLAGS_CPU-1:0] apu_flags_i,
// response channel
output logic apu_rvalid_o,
output logic [ 31:0] apu_rdata_o,
output logic [APU_NUSFLAGS_CPU-1:0] apu_rflags_o
);
import cv32e40p_pkg::*;
import fpnew_pkg::*;
logic [ fpnew_pkg::OP_BITS-1:0] fpu_op;
logic fpu_op_mod;
logic fpu_vec_op;
logic [ fpnew_pkg::FP_FORMAT_BITS-1:0] fpu_dst_fmt;
logic [ fpnew_pkg::FP_FORMAT_BITS-1:0] fpu_src_fmt;
logic [fpnew_pkg::INT_FORMAT_BITS-1:0] fpu_int_fmt;
logic [ C_RM-1:0] fp_rnd_mode;
// assign apu_rID_o = '0;
assign {fpu_vec_op, fpu_op_mod, fpu_op} = apu_op_i;
assign {fpu_int_fmt, fpu_src_fmt, fpu_dst_fmt, fp_rnd_mode} = apu_flags_i;
// -----------
// FPU Config
// -----------
// Features (enabled formats, vectors etc.)
localparam fpnew_pkg::fpu_features_t FPU_FEATURES = '{
Width: C_FLEN,
EnableVectors: C_XFVEC,
EnableNanBox: 1'b0,
FpFmtMask: {
C_RVF, C_RVD, C_XF16, C_XF8, C_XF16ALT
}, IntFmtMask: {
C_XFVEC && C_XF8, C_XFVEC && (C_XF16 || C_XF16ALT), 1'b1, 1'b0
}};
// Implementation (number of registers etc)
localparam fpnew_pkg::fpu_implementation_t FPU_IMPLEMENTATION = '{
PipeRegs: '{// FP32, FP64, FP16, FP8, FP16alt
'{
C_LAT_FP32, C_LAT_FP64, C_LAT_FP16, C_LAT_FP8, C_LAT_FP16ALT
}, // ADDMUL
'{default: C_LAT_DIVSQRT}, // DIVSQRT
'{default: C_LAT_NONCOMP}, // NONCOMP
'{default: C_LAT_CONV}
}, // CONV
UnitTypes: '{
'{default: fpnew_pkg::MERGED}, // ADDMUL
'{default: fpnew_pkg::MERGED}, // DIVSQRT
'{default: fpnew_pkg::PARALLEL}, // NONCOMP
'{default: fpnew_pkg::MERGED}
}, // CONV
PipeConfig: fpnew_pkg::AFTER};
//---------------
// FPU instance
//---------------
fpnew_top #(
.Features (FPU_FEATURES),
.Implementation(FPU_IMPLEMENTATION),
.TagType (logic)
) i_fpnew_bulk (
.clk_i (clk_i),
.rst_ni (rst_ni),
.operands_i (apu_operands_i),
.rnd_mode_i (fpnew_pkg::roundmode_e'(fp_rnd_mode)),
.op_i (fpnew_pkg::operation_e'(fpu_op)),
.op_mod_i (fpu_op_mod),
.src_fmt_i (fpnew_pkg::fp_format_e'(fpu_src_fmt)),
.dst_fmt_i (fpnew_pkg::fp_format_e'(fpu_dst_fmt)),
.int_fmt_i (fpnew_pkg::int_format_e'(fpu_int_fmt)),
.vectorial_op_i(fpu_vec_op),
.tag_i (1'b0),
.in_valid_i (apu_req_i),
.in_ready_o (apu_gnt_o),
.flush_i (1'b0),
.result_o (apu_rdata_o),
.status_o (apu_rflags_o),
.tag_o ( /* unused */),
.out_valid_o (apu_rvalid_o),
.out_ready_i (1'b1),
.busy_o ( /* unused */)
);
endmodule // cv32e40p_fp_wrapper
dd1f8e446This file is pinned to the selected release. Download the original to open it in your design tool.