Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
502c4dff8This file is pinned to the selected release. Download the original to open it in your design tool.
import sys
import re
input = sys.stdin.read()
regex = re.compile("/opt/esp/python_env/idf4\.1_py3\.6_env/bin/python \.\./\.\./opt/esp/idf/components/esptool_py/esptool/esptool\.py -p \(PORT\) -b 460800 --before default_reset --after hard_reset --chip esp32 write_flash --flash_mode dio --flash_size detect --flash_freq 80m .* build/bootloader/bootloader\.bin .* build/partition_table/partition-table\.bin .* build/ota_data_initial\.bin .* build/ctag-tbd\.bin .* build/storage\.bin")
command = regex.findall(input)[0]
command = command.replace("/opt/esp/python_env/idf4.1_py3.6_env/bin/python", "python")
command = command.replace("../../opt/esp/idf/components/esptool_py/esptool/esptool.py", "$ESP_TOOL_PATH")
command = command.replace("(PORT)", "$PORT")
command = command.replace("build/", "")
command = command.replace("bootloader/", "")
command = command.replace("partition_table/", "")
ite = """
if [ $# -le 1 ]
then
echo "Usage: $0 ESP_TOOL_PATH PORT"
echo "Using default parameters $ESP_TOOL_PATH $PORT"
else
ESP_TOOL_PATH=$1
PORT=$2
fi
"""
with open("flash.sh", "w") as flash_script:
flash_script.write("#!/bin/sh\n")
flash_script.write('PORT="/dev/tty.SLAB_USBtoUART"\n')
flash_script.write('ESP_TOOL_PATH="/opt/esp/idf/components/esptool_py/esptool/esptool.py"\n')
flash_script.write(ite)
flash_script.write(command)