Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
c84fa8875This file is pinned to the selected release. Download the original to open it in your design tool.
# Crosses Hinge
A case designed for [Crosses](https://github.com/Good-Great-Grand-Wonderful/crosses?tab=readme-ov-file), allowing adjustments to the **tenting angle**, **thumb cluster offset**, and **trackball position**.
- Only supports a **3x5 key matrix**.
## Video
[](https://www.youtube.com/watch?v=efjrwxRl2_M)
[Youtube](https://www.youtube.com/watch?v=efjrwxRl2_M)
## Parts
* 3x5 Matrix Case
* Thumb Cluster Case
* Top Part of the Trackball Stand
All parts are designed based on *the right-hand side.*
If needed, mirror them for the left side.
Fillets have been optimized for FDM 3D printing.
## BOM
Only lists **additional** components required (A SIDE)
* M3x5mm screws × 4
* M3x3mm threaded insert × 1
* M3 Hex Nut x 4 (Best: Width 5.5mm, Height 2.5mm)
* 140mm FFC cable
* Hinge (Lockable recommended)
* Finding the exact part may be difficult. Please compare the dimensions provided and choose accordingly.
* Source: [Taobao](https://detail.tmall.com/item.htm?id=735513025680)
* 
## License
[CC BY-NC 4.0](https://creativecommons.org/licenses/by-nc/4.0/)