Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
dc73e3fd0This file is pinned to the selected release. Download the original to open it in your design tool.
# Build Guide
This is the build guide for Corne Cherry v4.
## Parts
### Required
| Name | Count | Remarks |
|:---------------------|:--------|:--------------------------------------------------------------------------------------------|
| PCB | 1 set | |
| Case | 1 set | |
| Switch plate | 1 set | FR4 1.6mm thick |
| Key switches | 42 - 46 | Only Cherry MX compatible |
| Keycaps | 42 - 46 | 1u 40 pcs, 1.5u 2 pcs |
| Spacer M2 | 8 | 7.5 mm For Case assembly |
| Screw M2 | 16 | 5 mm For Case assembly |
| Rubber cushion | 8 | |
| TRRS (4 poles) cable | 1 | v4.0.0: TRS (3 poles) cable is not compatible<br/>v4.1.0: TRS (3 poles) cable is compatible |
| Type-C cable | 1 | |
### Optional
| Name | Count | Remarks |
|:---------------|:-------------|:----------------------------------------------|
| Rotary Encoder | 0 - 4 pieces | compatible product of the rotary encoder EC12 |
## Firmware preparation
please see [docs/firmware/rev4](../../firmware/rev4/firmware_en.md).
## Build
This is the build guide for the left hand side. The right side is the same procedure.
### 1: Attach switches to PCB
### Option: Solder rotary encoders instead of switches
If a rotary encoder is used, it can be attached instead of a switch at the position shown in the figure below. In that case, soldering from the back side is required.
### 2: Attach spacers to Case
### 3: Mount 1 to 2
### 4: Attach rubber cushions
### 5: Attach keycaps
