Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
# create-pipeline delta spec
## ADDED Requirements
### Requirement: Per-stage turn budgets
`.copperhead/config.json` SHALL accept an optional `stageMaxTurns` object mapping create-pipeline stage names to turn budgets. When a stage runs and its name has an entry, that value SHALL be the run's `maxTurns`; stages without an entry use the global `maxTurns`. Unknown stage names in the map SHALL be ignored.
#### Scenario: Stage-specific budget applies (AC-15.18)
- **WHEN** config contains `"stageMaxTurns": {"spec-seed": 60}` and the spec-seed stage runs
- **THEN** that stage's run enforces a 60-turn budget while other stages keep the global `maxTurns`
#### Scenario: Absent map changes nothing (AC-15.19)
- **WHEN** config has no `stageMaxTurns`
- **THEN** every stage uses the global `maxTurns` exactly as before
### Requirement: Content-aware stage completion
Stage completion SHALL be judged by repo state, not artifact existence alone: the schematic stage is complete only when the configured schematic contains at least one symbol AND the BOM/PINOUT tables are drift-clean against it; the layout-draft stage is complete only when a configured board exists containing at least one footprint AND the LAYOUT.md draft-quality marker is present. After a stage's agent run finishes with outcome success, `create` SHALL re-check that stage's completion contract and halt the pipeline (preserving committed partial work, with a resume hint) if the contract is not met, instead of advancing to later stages.
#### Scenario: Blank sheet does not complete the schematic stage (AC-15.23)
- **WHEN** the schematic stage's run succeeds but the configured schematic contains zero symbols
- **THEN** `create` reports the stage contract as unmet, does not advance, and a re-run of `copperhead create` resumes at the schematic stage
#### Scenario: Pipeline halts on planning-only output (AC-15.24)
- **WHEN** any stage's agent run returns success without satisfying that stage's completion contract
- **THEN** `runCreate` returns not-ok with the completed-stage list so far, and later stages do not run
ff4fe56b2This file is pinned to the selected release. Download the original to open it in your design tool.