Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2018 ETH Zurich and University of Bologna.
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
// Author: Florian Zaruba, ETH Zurich
// Date: 5.11.2018
// Description: 16-bit LFSR
`include "common_cells/assertions.svh"
`include "common_cells/registers.svh"
// --------------
// 16-bit LFSR
// --------------
//
// Description: Shift register
//
module cc_lfsr_16bit #(
parameter logic [15:0] Seed = 8'b0,
parameter int unsigned Width = 16
)(
input logic clk_i, // Clock
input logic rst_ni, // Asynchronous reset active low
input logic clr_i, // Synchronous clear active high
input logic en_i,
output logic [Width-1:0] refill_way_oh_o,
output logic [$clog2(Width)-1:0] refill_way_bin_o
);
localparam int unsigned LogWidth = $clog2(Width);
logic [15:0] shift_d, shift_q;
always_comb begin
automatic logic shift_in;
shift_in = !(shift_q[15] ^ shift_q[12] ^ shift_q[5] ^ shift_q[1]);
shift_d = shift_q;
if (en_i)
shift_d = {shift_q[14:0], shift_in};
// output assignment
refill_way_oh_o = 'b0;
refill_way_oh_o[shift_q[LogWidth-1:0]] = 1'b1;
refill_way_bin_o = shift_q;
end
`FFARNC(shift_q, shift_d, clr_i, Seed, clk_i, rst_ni)
`ifndef COMMON_CELLS_ASSERTS_OFF
`ASSERT_INIT(width_gt_16, Width <= 16,
"Width needs to be less than 16 because of the 16-bit LFSR")
`endif
endmodule
e73baaec2This file is pinned to the selected release. Download the original to open it in your design tool.