chuck

meta:
  keyboard: &keyboard_name Charlieflex
  author: chad@transtrum.net
  version: &version v1.3
  repository: &repo https://github.com/ctranstrum/chuck
  license: &license Licensed under CERN-OHL-P v2

  # Depending on where you are ordering from, uncomment or edit one of these:
  # order_num_template: &order_text JLCJLCJLCJLC # for ordering from JLCpcb.com
  # order_num_template: &order_text WayWayWay    # for ordering from PCBway.com
  order_num_template: &order_text "" # remove the order number text completely

units:
  dx: u
  dy: u

  hdx: dx / 2
  hdy: dy / 2

  knob_diameter: 25
  # how far to drop the outside edge of the knob, knob diameter must be larger than 21
  knob_skirt: 2

  # EC11 knob height must be at least 16
  ec11_knob_height: 17
  ec11_shaft_height: 7

  # EC12 knob height must be at least 8.5
  ec12_knob_height: 16
  ec12_shaft_height: 2.65

  # easily change the thicknesses of different parts of the case
  bottom_case_height: 3
  top_case_height: 2.2
  attic_case_height: 7

  mirrored_distance: 1.75 dx

points:
  zones:
    matrix:
      # Shift the PCB down and to the right to get it on the sheet in kicad
      anchor.shift: [50, -100]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance
      key:
        autobind: .5
        tags: [switch]
      columns:
        pinky:
          key:
            cpdst: CP0
            splay: -10
            mirror.cpdst: CP5
          rows:
            bottom:
              cpsrc: CP1
              bind: [0, 45, 0, 0]
              tags: [switch, low_bumper]
            home:
              cpsrc: CP2
              tags: [switch]
              shared: pinky_bottom
              mirror.shared: mirror_pinky_bottom
            top:
              orient: -5
              shift: [3, 3]
              cpsrc: CP3
              tags: [switch, high_bumper]
              bind: [0, 4]
        ring:
          key:
            stagger: 2/3 dx
            spread: 1.05 dx
            splay: -5
            cpdst: CP0
            mirror.cpdst: CP5
          rows:
            bottom:
              cpsrc: CP4
              tags: [switch, return]
            home:
              cpsrc: CP5
              tags: [switch]
              shared: ring_bottom
              mirror:
                cpsrc: CP0
                shared: mirror_ring_bottom
            top:
              cpdst: CP1
              cpsrc: CP0
              mirror.cpdst: CP4
              tags: [switch]
        middle:
          key:
            stagger: hdx
            spread: 1.04 dx
            splay: -5
            cpdst: CP1
            mirror.cpdst: CP4
          rows:
            bottom:
              cpsrc: CP2
              tags: [switch, return]
              shared: index_bottom
              mirror.shared: mirror_index_bottom
            home:
              cpsrc: CP3
            top:
              cpsrc: CP4
              tags: [switch, mid_bumper]
              bind: [0, 1]
              shared: middle_home
              mirror:
                cpsrc: CP1
                shared: mirror_middle_home
        index:
          key:
            stagger: -hdx
            splay: -2.5
            cpdst: CP2
            mirror.cpdst: CP3
          rows:
            bottom:
              cpdst: CP1
              cpsrc: CP5
              mirror.cpdst: CP4
            home:
              cpsrc: CP0
            top:
              cpsrc: CP1
              tags: [switch]
              shared: index_home
              mirror.shared: mirror_index_home
        inner:
          key:
            stagger: 2/3 hdx
            cpdst: CP2
            mirror.cpdst: CP3
          rows:
            bottom:
              cpsrc: CP3
              mirror.cpsrc: CP2
              tags: [switch, return]
            home:
              cpsrc: CP4
              tags: [switch]
              shared: inner_bottom
              mirror.shared: mirror_inner_bottom

    thumbs:
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance
      anchor:
        ref: matrix_inner_bottom
        shift: [0, -dy - 3]
      key:
        cpsrc: CP5
        mirror.cpsrc: CP6
        bind: [15, 0, 0, 15]
      columns:
        inner.rows.spot:
          splay: -15
          cpdst: CP2
          tags: [opt_switch]
        outer.rows.spot:
          cpdst: CP3
          tags: [switch]

    encoder:
      anchor:
        aggregate.parts: [thumbs_outer_spot, mirror_thumbs_outer_spot]
        shift: [0, 1.05 dy]
      key:
        tags: [encoder]
        cpsrc: CP6
        cpdst: CP1
        bind: [25, 4.3, 23.75, 4.3]

    mcu:
      key.tags: [mcu]
      anchor:
        # top middle left
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [-6, 2.65]

    power:
      key.tags: [power]
      anchor:
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [20, 13]

    reset:
      key:
        tags: [reset]
      anchor:
        ref: power
        shift: [0, -hdy]

    battery:
      anchor:
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [0, -7.5]
      key.tags: [battery]

    palm_bumper:
      key.tags: [bumper]
      anchor:
        ref: matrix_index_bottom
        shift: [0, -17]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    thumb_bumper:
      key.tags: [bumper, rect_bumper]
      anchor:
        ref: encoder
        shift: [0, -1.6 dy]

    center_bumper:
      key.tags: [bumper, rect_bumper]
      anchor:
        ref: encoder
        shift: [0, 1.3 dy]

    rectangle_top_bumper:
      key.tags: [rect_bumper]
      anchor:
        ref: matrix_pinky_top
        shift: [-2.3 hdx, 1.4 hdy]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    rectangle_bottom_bumper:
      key.tags: [rect_bumper]
      anchor:
        ref: matrix_pinky_bottom
        shift: [-0.25 hdx, -3 hdy]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    pinky_home_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_pinky_home
        shift: [-hdx / 2, hdy + 1.6]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    pinky_low_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_pinky_bottom
        shift: [hdy + 2, -hdy + 2]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    pinky_high_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_ring_top
        shift: [-hdx - 1.5, 0]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    middle_top_screw:
      key.tags: [top_screw]
      anchor:
        ref: matrix_middle_top
        shift: [4, hdy + 4]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    thumb_screw:
      key.tags: [screw]
      anchor:
        ref: thumbs_inner_spot
        shift: [-hdx - 2, -hdy + 3]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    center_screw:
      key.tags: [top_screw]
      anchor:
        ref: encoder
        shift: [0, 2 dy]

    center_bottom_screw:
      key.tags: [screw, rect_screw]
      anchor:
        ref: encoder
        shift: [0, -1.25 dy]

    pad_xiao_pos:
      key.tags: [pad_circle, xiao_pos_pad]
      anchor:
        ref: mcu
        shift: [-4, -15]

    pad_reset:
      key.tags: [pad_circle, reset_pad]
      anchor:
        ref: mcu
        shift: [4, -15]

    jst:
      key.tags: [jst]
      anchor:
        ref: mirror_matrix_index_top
        shift: [-0.75 hdx, dy]
        rotate: 315

outlines:
  _top_bridge:
    - what: rectangle
      where:
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [0, -7]
      size: [101.6, 44.25]

  _keys_surround:
    - what: rectangle
      where: [opt_switch, switch, encoder]
      bound: true
      size: [dx + 4, dy + 4]
      corner: 2
      fillet: 2

  outline_shapes_builder:
    - _top_bridge
    - ^_keys_surround

  _basic_outline_shape:
    - _top_bridge
    - _keys_surround

  board_outline:
    - what: outline
      name: _basic_outline_shape
      fillet: 2

  _board_outline_padding:
    - what: outline
      name: board_outline
      expand: 0.25

  _rectangle_outline:
    - what: rectangle
      where:
        aggregate.parts: [matrix_index_home, mirror_matrix_index_home]
      size: [230, 97.4]
      corner: 5

  rectangle_case_outline:
    - board_outline
    - what: outline
      name: _rectangle_outline
      fillet: 10

  _rectangle_snap1:
    - what: outline
      name: _rectangle_outline
      expand: -1
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap2:
    - what: outline
      name: _rectangle_outline
      expand: -1.05
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap3:
    - what: outline
      name: _rectangle_outline
      expand: -1.1
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap4:
    - what: outline
      name: _rectangle_outline
      expand: -1.15
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap5:
    - what: outline
      name: _rectangle_outline
      expand: -1.2
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap6:
    - what: outline
      name: _rectangle_outline
      expand: -1.25
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap7:
    - what: outline
      name: _rectangle_outline
      expand: -1.3
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_snap8:
    - what: outline
      name: _rectangle_outline
      expand: -1.35
    - what: outline
      name: board_outline
      fillet: 10

  _rectangle_clip1:
    - rectangle_case_outline
    - -_board_outline_padding
    - -_rectangle_snap1

  _rectangle_clip2:
    - rectangle_case_outline
    - -_board_outline_padding
    - -_rectangle_snap2

  _rectangle_clip3:
    - rectangle_case_outline
    - -_board_outline_padding
    - -_rectangle_snap3

  _rectangle_clip4:
    - rectangle_case_outline
    - -_board_outline_padding
    - -_rectangle_snap4

  _rectangle_clip5:
    - rectangle_case_outline
    - -_board_outline_padding
    - -_rectangle_snap5

  _rectangle_case_fill:
    - rectangle_case_outline
    - -_board_outline_padding

  _xiao_visualizer:
    - what: rectangle
      where: mcu
      size: [17.8, 21]
      corner: 2
    - what: rectangle
      where: mcu
      size: [8, 2]
      adjust.shift: [0, 11.5]

  _xiao_usb_cutout:
    - what: rectangle
      where: mcu
      size: [9.5, 8.5]
      adjust.shift: [0, 8.25]

  _xiao_light_guide:
    # in theory this should be 1.75mm diameter
    # but for FDM prints, I find I need more room
    - what: circle
      where: mcu
      radius: 1.05
      adjust.shift: [6, 7.5]

  _xiao_cutout:
    - what: rectangle
      where: mcu
      size: [14, 21]
      corner: 1
    - _xiao_usb_cutout

  _xiao_bottom_cutout:
    - what: rectangle
      where: mcu
      size: [14, 25]
      adjust.shift: [0, -4]

  _xiao_cutout_wall:
    - what: rectangle
      where: mcu
      size: [19, 21.5]
      corner: 1

      # Make some room for the solder
  _xiao_cutout_solder:
    - what: rectangle
      where: mcu
      size: [19, 18]
      corner: 1

  _xiao_chip:
    - what: rectangle
      where: mcu
      size: [13, 12]
      adjust.shift: [0, -2]

  _power_pcb_holes:
    - what: circle
      where: power
      radius: 0.45
      adjust.shift: [-1.5, 0]
    - what: circle
      where: power
      radius: 0.45
      adjust.shift: [1.5, 0]

  _power_visualizer:
    - what: rectangle
      where: power
      size: [8, 3.9]
    - what: rectangle
      where: power
      size: 1.3
      adjust.shift: [1.5, 2.6]
    - -_power_pcb_holes

  _power_cutout:
    - what: rectangle
      where: power
      size: [9, 4.7]
      adjust.shift: [0, -0.2]

  _reset_outline:
    - what: polygon
      points:
        - ref: reset
          shift: [2.6, 1.5]
        - ref: reset
          shift: [1.5, 2.6]
        - ref: reset
          shift: [-1.5, 2.6]
        - ref: reset
          shift: [-2.6, 1.5]
        - ref: reset
          shift: [-2.6, -1.5]
        - ref: reset
          shift: [-1.5, -2.6]
        - ref: reset
          shift: [1.5, -2.6]
        - ref: reset
          shift: [2.6, -1.5]
    - what: rectangle
      size: [6.4, 0.5]
      where: reset
      adjust.shift: [0, -1.85]
    - what: rectangle
      where: reset
      size: [6.4, 0.5]
      adjust.shift: [0, 1.85]

  _reset_button:
    - what: circle
      where: reset
      radius: 1

  _reset_button_cutout_smallest:
    - what: circle
      where: reset
      radius: 1.3

  _reset_button_cutout_small:
    - what: circle
      where: reset
      radius: 1.6

  _reset_button_cutout_medium:
    - what: circle
      where: reset
      radius: 1.9

  _reset_button_cutout_large:
    - what: circle
      where: reset
      radius: 2.1

  _reset_visualizer:
    - _reset_outline
    - ^_reset_button

  _reset_cutout:
    - what: rectangle
      where: reset
      size: [9, 6]
      corner: 1

  _reset_post:
    - what: circle
      where: reset
      radius: 1.1

  _battery_cutout:
    - what: rectangle
      where: battery
      size: [28, 33]
      corner: 1

  _jst_cutout:
    - what: rectangle
      where: jst
      size: 8
      adjust.shift: [0, -2]
      corner: 1
    - what: rectangle
      where: jst
      size: [12, 16]
      adjust.shift: [0, -12]
      corner: 3
    - what: rectangle
      where: jst
      size: [6, 30]
      adjust.shift: [0, -13]
      corner: 2

  _jst_pcb_holes:
    - what: circle
      where: jst
      radius: 0.4
      adjust.shift: [1, 0]
    - what: circle
      where: jst
      radius: 0.4
      adjust.shift: [-1, 0]

  _jst_tht_cutout:
    - what: outline
      name: _jst_pcb_holes
      expand: 1

  _encoder_knob_1:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 1

  _encoder_knob_2:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.8

  _encoder_knob_3:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.6

  _encoder_knob_4:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.4

  _encoder_knob_5:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.2

  _encoder_knob:
    - what: circle
      where: encoder
      radius: knob_diameter / 2

  _encoder_knob_skirt:
    - what: circle
      where: encoder
      radius: 10.5

  _encoder_stem:
    - what: circle
      where: encoder
      radius: 3
    - what: rectangle
      where: encoder
      size: 3.1
      adjust.shift: [0, 3.1]
      operation: subtract

  _encoder_stem_opening_1:
    - what: outline
      name: _encoder_stem
      expand: 0.1

  _encoder_stem_opening_2:
    - what: outline
      name: _encoder_stem
      expand: 0.2

  _encoder_screw_shaft:
    - what: circle
      where: encoder
      radius: 3.6

  _keycap:
    - what: rectangle
      size: 18
      corner: 1

  _keycaps:
    - what: outline
      name: _keycap
      where: [opt_switch, switch]

  top_down_view:
    - board_outline
    - _xiao_visualizer
    - _power_visualizer
    - _reset_visualizer
    - -_keycaps
    - -_encoder_knob
    - -_xiao_light_guide

  _encoder_plate_cutout:
    - what: rectangle
      where: encoder
      size: [12.4, 13.2]
    - what: rectangle
      where: encoder
      size: [6.1, 1.2]
      adjust.shift: [0, -7.2]

  _encoder_plate_cutout_expanded:
    - what: outline
      name: _encoder_plate_cutout
      expand: 1

  _diode:
    - what: rectangle
      size: [2.7, 1.65]
    - what: rectangle
      size: [3.9, 0.6]

  _diodes:
    - what: outline
      name: _diode
      where: [opt_switch, switch]
      adjust:
        shift: [5, -4]
        resist: true
    - what: outline
      name: _diode
      where: encoder
      adjust.shift: [0, 14]

  _diodes_cutout:
    - what: rectangle
      where: [opt_switch, switch]
      size: [5.2, 2.2]
      adjust:
        shift: [5, -4]
        resist: true
    - what: rectangle
      where: encoder
      size: [5.2, 2.2]
      adjust.shift: [0, 14]

  _return_diodes:
    - what: outline
      name: _diode
      where: return
      adjust.shift: [0, -0.4 dy]
    - what: outline
      name: _diode
      where: return
      adjust.shift: [0, -0.55 dy]

  _return_diodes_cutout:
    - what: rectangle
      where: return
      size: 5.2
      adjust.shift: [0, -0.475 dy]

  _switch_cutout:
    - what: rectangle
      size: 14
      corner: 1

  _switch_clip:
    - what: rectangle
      size: [15, 14]
      corner: 1

  _switches_plate_cutout:
    - what: outline
      name: _switch_cutout
      where: switch
    - _encoder_plate_cutout

  _optional_left_switch_cutout:
    - what: outline
      name: _switch_cutout
      where: [[opt_switch, /^thumb/]]

  _optional_right_switch_cutout:
    - what: outline
      name: _switch_cutout
      where: [[opt_switch, /^mirror/]]

  _switches_clip_cutout:
    - what: outline
      name: _switch_clip
      where: switch

  _optional_left_clip_cutout:
    - what: outline
      name: _switch_clip
      where: [[opt_switch, /^thumb/]]

  _optional_right_clip_cutout:
    - what: outline
      name: _switch_clip
      where: [[opt_switch, /^mirror/]]

  _switches_swap_tool:
    - what: rectangle
      where: switch
      size: [3.5, 18.7]
      corner: 1

  _optional_left_swap_tool:
    - what: rectangle
      where: [[opt_switch, /^thumb/]]
      size: [3.5, 18.7]
      corner: 1

  _optional_right_swap_tool:
    - what: rectangle
      where: [[opt_switch, /^mirror/]]
      size: [3.5, 18.7]
      corner: 1

  _switch_holes:
    # these are created in the pcb software ...
    # but we need to create them manually for our mock pcb
    # ... also the radius has been rounded up for fdm printing ...
    - what: circle # center post
      radius: 2.5
    - what: circle # v1 left stabililzer
      radius: 0.9
      adjust.shift: [-5.5, 0]
    - what: circle # v1 right stabilizer
      radius: 0.9
      adjust.shift: [5.5, 0]
    - what: circle # v2 stabilizer
      radius: 0.8
      adjust.shift: [-5, -5.15]

  _switch_holes_placed:
    - what: outline
      name: _switch_holes
      where: [opt_switch, switch]
      adjust.resist: true

  _socket_post_holes:
    # center
    - what: circle
      radius: 1.6
      adjust.shift: [0, -5.95]
      # left (or rather, right on the opposite side of the board)
    - what: circle
      radius: 1.6
      adjust.shift: [-5, -3.75]

  _socket_pcb_holes:
    - what: outline
      name: _socket_post_holes
      where: [opt_switch, switch]
      adjust:
        rotate: 180
        resist: true

        # make a fairly accurate socket model
  _socket_outline:
    - what: rectangle
      adjust.shift: [0, -5.95]
      size: [4.75, 4.65]
      bevel: 1
    - what: rectangle
      adjust.shift: [-4.85, -3.8]
      size: [4.85, 4.65]
      fillet: 1
    - what: rectangle
      size: 2.6
      adjust.shift: [-2.4, -4.8]
    - what: rectangle
      adjust.shift: [-1.4, -2.5]
      size: 2.3
    - what: circle
      radius: 2.3
      adjust.shift: [-0.4, -1.35]
      operation: subtract
    - what: rectangle
      size: 2
      adjust.shift: [-2.375, -6.125]
    - what: circle
      radius: 1
      adjust.shift: [-3.375, -7.125]
      operation: subtract
    - what: rectangle
      size: [3.6, 1.7]
      adjust.shift: [2.375, -5.95]
    - what: rectangle
      size: [3.6, 1.7]
      adjust.shift: [-7.325, -3.8]
    - what: rectangle
      size: [2, 0.6]
      adjust.shift: [-6.5, -1.775]

  _socket_outlines:
    - what: outline
      name: _socket_outline
      where: [opt_switch, switch]
      adjust:
        rotate: 180
        resist: true

        # enlarge it a bit for wiggle room
  _socket_expanded:
    - what: outline
      name: _socket_outline
      expand: 0.75

      # then drop it under every key
  _socket_cutout:
    - what: outline
      name: _socket_expanded
      where: [opt_switch, switch]
      adjust:
        rotate: 180
        resist: true

  _socket_visualizer:
    - _switch_holes_placed
    - _socket_outlines

  _encoder_pcb_holes:
    # This is just an approximation of the encoder mounting holes
    - what: circle
      where: encoder
      radius: 1.15
      adjust.shift: [-5.6, 0]
    - what: circle
      where: encoder
      radius: 1.15
      adjust.shift: [5.6, 0]
    - what: circle
      where: encoder
      radius: 0.8
      adjust.shift: [-2.5, -7.5]
    - what: circle
      where: encoder
      radius: 0.8
      adjust.shift: [0, -7.5]
    - what: circle
      where: encoder
      radius: 0.8
      adjust.shift: [2.5, -7.5]

  _encoder_bottom_cutout:
    - what: circle
      where: encoder
      radius: 1.5
      adjust.shift: [-5.6, 0]
    - what: circle
      where: encoder
      radius: 1.5
      adjust.shift: [5.6, 0]
    - what: rectangle
      where: encoder
      size: [9, 2]
      adjust.shift: [0, -7.2]
    - what: circle
      where: encoder
      radius: 1
      adjust.shift: [2.5, 7]
    - what: circle
      where: encoder
      radius: 1
      adjust.shift: [-2.5, 7]

  _pad_cutout:
    - what: circle
      where: pad_circle
      radius: 1.5

  _screw_shaft:
    - what: circle
      where: [screw, top_screw]
      radius: 1.2

  _countersink1:
    - what: outline
      name: _screw_shaft
      expand: 1

  _countersink2:
    - what: outline
      name: _screw_shaft
      expand: 0.8

  _countersink3:
    - what: outline
      name: _screw_shaft
      expand: 0.6

  _countersink4:
    - what: outline
      name: _screw_shaft
      expand: 0.4

  _countersink5:
    - what: outline
      name: _screw_shaft
      expand: 0.2

  _rect_screw_shaft:
    - what: circle
      where: [rect_screw, top_screw]
      radius: 1.2

  _rect_countersink1:
    - what: outline
      name: _rect_screw_shaft
      expand: 1

  _rect_countersink2:
    - what: outline
      name: _rect_screw_shaft
      expand: 0.8

  _rect_countersink3:
    - what: outline
      name: _rect_screw_shaft
      expand: 0.6

  _rect_countersink4:
    - what: outline
      name: _rect_screw_shaft
      expand: 0.4

  _rect_countersink5:
    - what: outline
      name: _rect_screw_shaft
      expand: 0.2

  pcb_outline:
    - board_outline
    - -_xiao_cutout
    # - -_battery_cutout

  _hex_nut_angle:
    - what: rectangle
      size: [2.45, 4.25]

  _hex_nut:
    - _hex_nut_angle
    - what: outline
      name: _hex_nut_angle
      adjust.rotate: 60
    - what: outline
      name: _hex_nut_angle
      adjust.rotate: -60

  _hex_nuts:
    - what: outline
      name: _hex_nut
      where: screw

  _hex_nuts_wired:
    - _hex_nuts
    - what: outline
      name: _hex_nut
      where: top_screw

  _rect_hex_nuts:
    - what: outline
      name: _hex_nut
      where: rect_screw

  _top_heat_set:
    - what: circle
      radius: 1.45
      where: top_screw

  _top_heat_set_passage:
    - what: circle
      radius: 1.2
      where: top_screw

  _bumper:
    - what: circle
      radius: 3.1

  _low_bumper:
    - what: outline
      name: _bumper
      where: low_bumper
      adjust.shift: [-7, -7]

  _mid_bumper:
    - what: outline
      name: _bumper
      where: mid_bumper
      adjust.shift: [11, 15]

  _high_bumper:
    - what: outline
      name: _bumper
      where: high_bumper
      adjust.shift: [-7, 11]

  _bumpers:
    - what: outline
      name: _bumper
      where: bumper

  _all_bumpers:
    - _low_bumper
    - _mid_bumper
    - _high_bumper
    - _bumpers

  _rect_bumpers:
    - _mid_bumper
    - what: outline
      name: _bumper
      where: rect_bumper

  top_plate:
    - board_outline
    - -_switches_plate_cutout
    - -_switches_swap_tool
    - -_xiao_light_guide
    - ^_switches_clip_cutout
    - ^_encoder_plate_cutout_expanded
    - ^_battery_cutout
    - ^_jst_cutout
    - ^_xiao_usb_cutout
    - ^_xiao_chip
    - ^_hex_nuts

  rectangle_visualizer:
    - rectangle_case_outline
    - ^_rectangle_snap1
    - ^_rectangle_snap8
    - ^_rect_bumpers
    - ^_rect_countersink1

  component_visualization:
    - board_outline
    - ^_xiao_cutout
    - ^_switches_plate_cutout
    - ^_switches_clip_cutout
    - ^_socket_visualizer
    - ^_socket_pcb_holes
    - ^_keycaps
    - ^_encoder_knob
    - ^_encoder_pcb_holes
    - ^_encoder_bottom_cutout
    - ^_xiao_visualizer
    - ^_xiao_light_guide
    - ^_power_visualizer
    - ^_power_cutout
    - ^_reset_visualizer
    - ^_reset_cutout
    - ^_jst_pcb_holes
    - ^_battery_cutout
    - ^_jst_cutout
    - ^_pad_cutout
    - ^_hex_nuts
    - ^_screw_shaft
    - ^_all_bumpers
    - ^_diodes
    - ^_diodes_cutout
    - ^_return_diodes
    - ^_return_diodes_cutout

  _attic_outline_poly:
    - what: polygon
      points:
        - ref: matrix_middle_top
          shift: [-dx, dy]
        - ref: matrix_middle_top
          shift: [-dx, hdy]
        - ref: matrix_middle_top
          shift: [hdx, hdy]
        - ref: matrix_middle_top
          shift: [hdx, 0]
        - ref: matrix_index_top
          shift: [hdx, hdy]
        - ref: matrix_inner_home
          shift: [-hdx, hdy]
        - ref: matrix_inner_home
          shift: [hdx, hdy]

        - ref: mirror_matrix_inner_home
          shift: [hdx, hdy]
        - ref: mirror_matrix_inner_home
          shift: [-hdx, hdy]
        - ref: mirror_matrix_index_top
          shift: [hdx, hdy]
        - ref: mirror_matrix_middle_top
          shift: [hdx, 0]
        - ref: mirror_matrix_middle_top
          shift: [hdx, hdy]
        - ref: mirror_matrix_middle_top
          shift: [-dx, hdy]
        - ref: mirror_matrix_middle_top
          shift: [-dx, dy]

  _attic_outline:
    - board_outline
    - what: outline
      name: _attic_outline_poly
      operation: intersect
      fillet: 2

  attic_outline:
    - what: outline
      name: _attic_outline
      fillet: 1

  _attic_outline_1:
    - what: outline
      name: attic_outline
      expand: -0.1

  _attic_outline_2:
    - what: outline
      name: attic_outline
      expand: -0.2

  _attic_outline_3:
    - what: outline
      name: attic_outline
      expand: -0.3

  _attic_outline_4:
    - what: outline
      name: attic_outline
      expand: -0.4

  _attic_outline_5:
    - what: outline
      name: attic_outline
      expand: -0.5

  _attic_outline_6:
    - what: outline
      name: attic_outline
      expand: -0.6

  _attic_outline_7:
    - what: outline
      name: attic_outline
      expand: -0.7

  _attic_outline_8:
    - what: outline
      name: attic_outline
      expand: -0.8

  _attic_outline_9:
    - what: outline
      name: attic_outline
      expand: -0.9

  _dovetail_outline_poly:
    - what: polygon
      points:
        - ref: matrix_middle_top
          shift: [hdx, 2dy]
        - ref: matrix_middle_top
          shift: [hdx, 0]
        - ref: matrix_index_top
          shift: [hdx, hdy]
        - ref: matrix_inner_home
          shift: [-hdx, hdy]
        - ref: matrix_inner_home
          shift: [hdx, hdy]

        - ref: matrix_inner_bottom
          shift: [hdx, -hdy]
        - ref: thumbs_outer_spot
          shift: [-hdx, hdy]
        - ref: thumbs_outer_spot
          shift: [hdx, hdy]
        - ref: thumbs_outer_spot
          shift: [hdx, -2dy]

        - ref: mirror_thumbs_outer_spot
          shift: [hdx, -2dy]
        - ref: mirror_thumbs_outer_spot
          shift: [hdx, hdy]
        - ref: mirror_thumbs_outer_spot
          shift: [-hdx, hdy]
        - ref: mirror_matrix_inner_bottom
          shift: [hdx, -hdy]

        - ref: mirror_matrix_inner_home
          shift: [hdx, hdy]
        - ref: mirror_matrix_inner_home
          shift: [-hdx, hdy]
        - ref: mirror_matrix_index_top
          shift: [hdx, hdy]
        - ref: mirror_matrix_middle_top
          shift: [hdx, 0]
        - ref: mirror_matrix_middle_top
          shift: [hdx, 2dy]

  dovetail:
    - board_outline
    - ~_dovetail_outline_poly

  _dovetail_1:
    - what: outline
      name: dovetail
      expand: 0.2
    - ~board_outline

  _dovetail_2:
    - what: outline
      name: dovetail
      expand: 0.4
    - ~board_outline

  _dovetail_3:
    - what: outline
      name: dovetail
      expand: 0.6
    - ~board_outline

  _dovetail_4:
    - what: outline
      name: dovetail
      expand: 0.8
    - ~board_outline

  _left_half:
    - what: rectangle
      where: matrix_middle_bottom
      size: [115, 150]
      adjust.rotate: 20

  _right_half:
    - what: rectangle
      where: mirror_matrix_middle_bottom
      size: [115, 150]
      adjust.rotate: 20

  dovetail_visualizer:
    - board_outline
    - -dovetail
    - ^_left_half
    - ^_right_half

cases:
  _countersunk_screw:
    - what: outline
      name: _countersink1
      extrude: 0.2
    - what: outline
      name: _countersink2
      extrude: 0.2
      shift: [0, 0, 0.2]
    - what: outline
      name: _countersink3
      extrude: 0.2
      shift: [0, 0, 0.4]
    - what: outline
      name: _countersink4
      extrude: 0.2
      shift: [0, 0, 0.6]
    - what: outline
      name: _countersink5
      extrude: 0.2
      shift: [0, 0, 0.8]
    - what: outline
      name: _screw_shaft
      extrude: bottom_case_height - 1
      shift: [0, 0, 1]

  _rect_countersunk_screw:
    - what: outline
      name: _rect_countersink1
      extrude: 0.2
    - what: outline
      name: _rect_countersink2
      extrude: 0.2
      shift: [0, 0, 0.2]
    - what: outline
      name: _rect_countersink3
      extrude: 0.2
      shift: [0, 0, 0.4]
    - what: outline
      name: _rect_countersink4
      extrude: 0.2
      shift: [0, 0, 0.6]
    - what: outline
      name: _rect_countersink5
      extrude: 0.2
      shift: [0, 0, 0.8]
    - what: outline
      name: _rect_screw_shaft
      extrude: bottom_case_height - 1
      shift: [0, 0, 1]

  _reset_bottom_cutout:
    - what: outline
      name: _reset_cutout
      extrude: 1.2
      shift: [0, 0, bottom_case_height - 1.2]
    - what: outline
      name: _reset_button_cutout_large
      extrude: 0.2
    - what: outline
      name: _reset_button_cutout_medium
      extrude: 0.2
      shift: [0, 0, 0.2]
    - what: outline
      name: _reset_button_cutout_small
      extrude: 0.2
      shift: [0, 0, 0.4]
    - what: outline
      name: _reset_button_cutout_smallest
      extrude: bottom_case_height - 1.8
      shift: [0, 0, 0.6]

  _encoder_knob_bevel:
    - what: outline
      name: _encoder_knob_1
      extrude: 0.2
    - what: outline
      name: _encoder_knob_2
      extrude: 0.2
      shift: [0, 0, 0.2]
    - what: outline
      name: _encoder_knob_3
      extrude: 0.2
      shift: [0, 0, 0.4]
    - what: outline
      name: _encoder_knob_4
      extrude: 0.2
      shift: [0, 0, 0.6]
    - what: outline
      name: _encoder_knob_5
      extrude: 0.2
      shift: [0, 0, 0.8]

  ec11_encoder_knob:
    - _encoder_knob_bevel
    - what: outline
      name: _encoder_knob
      extrude: ec11_knob_height - 2
      shift: [0, 0, 1]
    - what: outline
      name: _encoder_knob_5
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 1]
    - what: outline
      name: _encoder_knob_4
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.8]
    - what: outline
      name: _encoder_knob_3
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.6]
    - what: outline
      name: _encoder_knob_2
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.4]
    - what: outline
      name: _encoder_knob_1
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.2]
    - what: outline
      name: _encoder_stem
      extrude: ec11_shaft_height - 0.4
      shift: [0, 0, 1]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_1
      extrude: 0.2
      shift: [0, 0, ec11_shaft_height + 0.6]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_2
      extrude: 0.2
      shift: [0, 0, ec11_shaft_height + 0.8]
      operation: subtract
    - what: outline
      name: _encoder_screw_shaft
      extrude: ec11_knob_height - ec11_shaft_height - 2
      shift: [0, 0, ec11_shaft_height + 1]
      operation: subtract
    - what: outline
      name: _encoder_knob_skirt
      extrude: knob_skirt
      shift: [0, 0, ec11_knob_height - knob_skirt]
      operation: subtract

  ec12_encoder_knob:
    - _encoder_knob_bevel
    - what: outline
      name: _encoder_knob
      extrude: ec12_knob_height - 2
      shift: [0, 0, 1]
    - what: outline
      name: _encoder_knob_5
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 1]
    - what: outline
      name: _encoder_knob_4
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.8]
    - what: outline
      name: _encoder_knob_3
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.6]
    - what: outline
      name: _encoder_knob_2
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.4]
    - what: outline
      name: _encoder_knob_1
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.2]
    - what: outline
      name: _encoder_stem
      extrude: ec12_shaft_height - 0.4 + knob_skirt
      shift: [0, 0, ec12_knob_height - ec12_shaft_height - knob_skirt]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_1
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.4 - knob_skirt]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_2
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.2 - knob_skirt]
      operation: subtract
    - what: outline
      name: _encoder_knob_skirt
      extrude: knob_skirt
      shift: [0, 0, ec12_knob_height - knob_skirt]
      operation: subtract

  _bottom_cutouts:
    - what: outline
      name: _socket_cutout
      extrude: 2
      shift: [0, 0, bottom_case_height - 2]
    - what: outline
      name: _switch_holes_placed
      extrude: 1.8
      shift: [0, 0, bottom_case_height - 1.8]
    - what: outline
      name: _encoder_bottom_cutout
      extrude: 2
      shift: [0, 0, bottom_case_height - 2]
    - what: outline
      name: _diodes_cutout
      extrude: 1.4
      shift: [0, 0, bottom_case_height - 1.4]
    - what: outline
      name: _return_diodes_cutout
      extrude: 1.2
      shift: [0, 0, bottom_case_height - 1.2]
    - what: outline
      name: _xiao_bottom_cutout
      extrude: 2.5
      shift: [0, 0, bottom_case_height - 2.5]
    - what: outline
      name: _xiao_cutout_wall
      extrude: 1.2
      shift: [0, 0, bottom_case_height - 1.2]
    - what: outline
      name: _xiao_cutout_solder
      extrude: 0.5
      shift: [0, 0, 1.5]
    - _reset_bottom_cutout

  _wireless_bottom_cutouts:
    - what: outline
      name: _power_cutout
      extrude: 1.6
      shift: [0, 0, bottom_case_height - 1.6]
    - what: outline
      name: _jst_tht_cutout
      extrude: 1.6
      shift: [0, 0, bottom_case_height - 1.6]

  rectangle_bottom_case:
    - what: outline
      name: _rectangle_snap8
      extrude: 0.1
    - what: outline
      name: _rectangle_snap7
      extrude: 0.1
      shift: [0, 0, 0.1]
    - what: outline
      name: _rectangle_snap6
      extrude: 0.1
      shift: [0, 0, 0.2]
    - what: outline
      name: _rectangle_snap5
      extrude: 0.1
      shift: [0, 0, 0.3]
    - what: outline
      name: _rectangle_snap4
      extrude: bottom_case_height - 0.4
      shift: [0, 0, 0.4]
    - what: outline
      name: _rect_bumpers
      extrude: 1
      operation: subtract
    - -_bottom_cutouts
    - -_rect_countersunk_screw
    - -_wireless_bottom_cutouts

  wired_bottom_case:
    - what: outline
      name: board_outline
      extrude: bottom_case_height
    - what: outline
      name: _all_bumpers
      extrude: 1
      operation: subtract
    - -_bottom_cutouts
    - -_countersunk_screw

  bottom_case:
    - wired_bottom_case
    - -_wireless_bottom_cutouts

  _top_cutouts:
    - what: outline
      name: _xiao_light_guide
      extrude: top_case_height
    - what: outline
      name: _switches_plate_cutout
      extrude: top_case_height
    - what: outline
      name: _encoder_plate_cutout_expanded
      extrude: 1.2
    - what: outline
      name: _switches_clip_cutout
      extrude: top_case_height - 1.3
    - what: outline
      name: _switches_swap_tool
      extrude: 1
      shift: [0, 0, top_case_height - 1]
    - what: outline
      name: _xiao_usb_cutout
      extrude: 1.7
    - what: outline
      name: _xiao_chip
      extrude: 0.2
    - what: outline
      name: _pad_cutout
      extrude: 1

  _wired_top_cutouts:
    - _top_cutouts
    - what: outline
      name: _hex_nuts_wired
      extrude: 1.8

  _wireless_top_cutouts:
    - _top_cutouts
    - what: outline
      name: _hex_nuts
      extrude: 1.8
    - what: outline
      name: _top_heat_set_passage
      extrude: top_case_height
    - what: outline
      name: _jst_cutout
      extrude: top_case_height

  _rect_top_cutouts:
    - _top_cutouts
    - what: outline
      name: _rect_hex_nuts
      extrude: 1.8
    - what: outline
      name: _top_heat_set_passage
      extrude: top_case_height
    - what: outline
      name: _jst_cutout
      extrude: top_case_height

  _top_left_cutouts:
    - what: outline
      name: _optional_left_switch_cutout
      extrude: top_case_height
    - what: outline
      name: _optional_left_clip_cutout
      extrude: top_case_height - 1.3
    - what: outline
      name: _optional_left_swap_tool
      extrude: 1
      shift: [0, 0, top_case_height - 1]

  _top_right_cutouts:
    - what: outline
      name: _optional_right_switch_cutout
      extrude: top_case_height
    - what: outline
      name: _optional_right_clip_cutout
      extrude: top_case_height - 1.3
    - what: outline
      name: _optional_right_swap_tool
      extrude: 1
      shift: [0, 0, top_case_height - 1]

  top_case_one_up_chuck:
    - what: outline
      name: board_outline
      extrude: top_case_height
    - -_wireless_top_cutouts

  top_case_chucker_by_the_dozen:
    - top_case_one_up_chuck
    - -_top_right_cutouts

  top_case_twentyone_chuck_street:
    - top_case_one_up_chuck
    - -_top_left_cutouts

  top_case:
    - top_case_one_up_chuck
    - -_top_left_cutouts
    - -_top_right_cutouts

  wired_top_case_one_up_chuck:
    - what: outline
      name: board_outline
      extrude: top_case_height
    - -_wired_top_cutouts

  wired_top_case_chucker_by_the_dozen:
    - wired_top_case_one_up_chuck
    - -_top_right_cutouts

  wired_top_case_twentyone_chuck_street:
    - wired_top_case_one_up_chuck
    - -_top_left_cutouts

  wired_top_case:
    - wired_top_case_one_up_chuck
    - -_top_left_cutouts
    - -_top_right_cutouts

  _rectangle_top_case_one_up_chuck:
    - what: outline
      name: rectangle_case_outline
      extrude: top_case_height
    - -_rect_top_cutouts

  _rectangle_top_case_chucker_by_the_dozen:
    - _rectangle_top_case_one_up_chuck
    - -_top_right_cutouts

  _rectangle_top_case_twentyone_chuck_street:
    - _rectangle_top_case_one_up_chuck
    - -_top_left_cutouts

  _rectangle_top_case:
    - _rectangle_top_case_one_up_chuck
    - -_top_left_cutouts
    - -_top_right_cutouts

  _rectangle_top_common:
    - what: outline
      name: _rectangle_case_fill
      extrude: 1.6
      shift: [0, 0, bottom_case_height]
    - what: outline
      name: _rectangle_clip1
      extrude: bottom_case_height - 0.4
      shift: [0, 0, 0.4]
    - what: outline
      name: _rectangle_clip2
      extrude: 0.1
      shift: [0, 0, 0.3]
    - what: outline
      name: _rectangle_clip3
      extrude: 0.1
      shift: [0, 0, 0.2]
    - what: outline
      name: _rectangle_clip4
      extrude: 0.1
      shift: [0, 0, 0.1]
    - what: outline
      name: _rectangle_clip5
      extrude: 0.1

  rectangle_top_case_one_up_chuck:
    - _rectangle_top_common
    - what: case
      name: _rectangle_top_case_one_up_chuck
      shift: [0, 0, 1.6 + bottom_case_height]

  rectangle_top_case_chucker_by_the_dozen:
    - _rectangle_top_common
    - what: case
      name: _rectangle_top_case_chucker_by_the_dozen
      shift: [0, 0, 1.6 + bottom_case_height]

  rectangle_top_case_twentyone_chuck_street:
    - _rectangle_top_common
    - what: case
      name: _rectangle_top_case_twentyone_chuck_street
      shift: [0, 0, 1.6 + bottom_case_height]

  rectangle_top_case:
    - _rectangle_top_common
    - what: case
      name: _rectangle_top_case
      shift: [0, 0, 1.6 + bottom_case_height]

  _top_dovetail:
    - what: outline
      name: dovetail
      extrude: top_case_height / 5
      shift: [0, 0, 4 * top_case_height / 5]
    - what: outline
      name: _dovetail_1
      extrude: top_case_height / 5
      shift: [0, 0, 3 * top_case_height / 5]
    - what: outline
      name: _dovetail_2
      extrude: top_case_height / 5
      shift: [0, 0, 2 * top_case_height / 5]
    - what: outline
      name: _dovetail_3
      extrude: top_case_height / 5
      shift: [0, 0, top_case_height / 5]
    - what: outline
      name: _dovetail_4
      extrude: top_case_height / 5

  top_dovetail:
    - _top_dovetail
    - -_wireless_top_cutouts

  _top_dovetail_sides_1:
    - top_case_one_up_chuck
    - -_top_dovetail

  _top_dovetail_sides_2:
    - top_case
    - -_top_dovetail

  _dovetail_right:
    - what: outline
      name: _right_half
      extrude: top_case_height

  _dovetail_left:
    - what: outline
      name: _left_half
      extrude: top_case_height

  top_dovetail_left_1:
    - _top_dovetail_sides_1
    - -_dovetail_right

  top_dovetail_right_1:
    - _top_dovetail_sides_1
    - -_dovetail_left

  top_dovetail_left_2:
    - _top_dovetail_sides_2
    - -_dovetail_right

  top_dovetail_right_2:
    - _top_dovetail_sides_2
    - -_dovetail_left

  wired_top_dovetail:
    - _top_dovetail
    - -_wired_top_cutouts

  _wired_top_dovetail_sides_1:
    - wired_top_case_one_up_chuck
    - -_top_dovetail

  _wired_top_dovetail_sides_2:
    - wired_top_case
    - -_top_dovetail

  wired_top_dovetail_left_1:
    - _wired_top_dovetail_sides_1
    - -_dovetail_right

  wired_top_dovetail_right_1:
    - _wired_top_dovetail_sides_1
    - -_dovetail_left

  wired_top_dovetail_left_2:
    - _wired_top_dovetail_sides_2
    - -_dovetail_right

  wired_top_dovetail_right_2:
    - _wired_top_dovetail_sides_2
    - -_dovetail_left

  attic:
    - what: outline
      name: attic_outline
      extrude: attic_case_height / 10
    - what: outline
      name: _attic_outline_1
      extrude: 2 * attic_case_height / 10
    - what: outline
      name: _attic_outline_2
      extrude: 3 * attic_case_height / 10
    - what: outline
      name: _attic_outline_3
      extrude: 4 * attic_case_height / 10
    - what: outline
      name: _attic_outline_4
      extrude: 5 * attic_case_height / 10
    - what: outline
      name: _attic_outline_5
      extrude: 6 * attic_case_height / 10
    - what: outline
      name: _attic_outline_6
      extrude: 7 * attic_case_height / 10
    - what: outline
      name: _attic_outline_7
      extrude: 8 * attic_case_height / 10
    - what: outline
      name: _attic_outline_8
      extrude: 9 * attic_case_height / 10
    - what: outline
      name: _attic_outline_9
      extrude: 10 * attic_case_height / 10
    - what: outline
      name: _xiao_light_guide
      extrude: attic_case_height
      operation: subtract
    - what: outline
      name: _battery_cutout
      extrude: attic_case_height - 1
      operation: subtract
    - what: outline
      name: _jst_cutout
      extrude: 3
      operation: subtract
    - what: outline
      name: _top_heat_set
      extrude: 3
      operation: subtract
    - what: outline
      name: _top_heat_set_passage
      extrude: 1.5
      shift: [0, 0, 3]
      operation: subtract

  # Remove the underscore to print out the mock PCB if you want to check for fit
  _mock_pcb:
    - what: outline
      name: pcb_outline
      extrude: 1.6
    - what: outline
      name: _socket_pcb_holes
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _screw_shaft
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _power_pcb_holes
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _encoder_pcb_holes
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _jst_pcb_holes
      extrude: 1.6
      operation: subtract

pcbs:
  chuck:
    template: kicad8
    outlines:
      main:
        outline: pcb_outline
    params:
      name: *keyboard_name
      paper: A4

    footprints:
      hotswap_sockets:
        what: choc-v1-v2
        where: [opt_switch, switch]
        params:
          from: "{{cpsrc}}"
          to: "{{colrow}}"
          include_keycap: true
          include_corner_marks: true

      charlieplex_map:
        what: text
        where: [opt_switch, switch]
        adjust:
          shift: [-3/5 hdx, hdy / 3]
          resist: true
        params:
          side: B
          text: "{{cpsrc}}-{{cpdst}}"

      diodes:
        what: sod123
        where: [opt_switch, switch]
        adjust:
          shift: [5, -4]
          resist: true
        params:
          side: B
          designator: SW
          from: "{{colrow}}"
          to: "D_{{cpdst}}"
          smd: true
          via: pad
          labels: true

      encoder_charlieplex:
        what: text
        where: encoder
        adjust.shift: [0, hdy]
        params:
          side: B
          text: "{{cpsrc}}-{{cpdst}}"

      encoder_diode:
        what: sod123
        where: encoder
        adjust:
          shift: [0, 14]
        params:
          side: B
          designator: SW
          from: encdiode
          to: "D_{{cpdst}}"
          smd: true
          via: pad
          labels: true

      return_diodes:
        what: sod123
        where: return
        adjust.shift: [0, -0.4 dy]
        params:
          side: B
          designator: D
          from: "D_{{cpdst}}"
          to: "{{cpdst}}"
          smd: true
          via: pad
          labels: true

      interrupt_diodes:
        what: sod123
        where: return
        adjust.shift: [0, -0.55 dy]
        params:
          side: B
          designator: I
          from: "D_{{cpdst}}"
          to: CP_INT
          smd: true
          via: pad
          labels: true

      encoder:
        what: encoder
        where: encoder
        params:
          include_momentary_switch_pads: true
          include_plate_hole_marking: true
          include_silkscreen: true
          S1: "{{cpsrc}}"
          S2: encdiode

      xiao_mcu:
        what: xiao
        where: mcu
        params:
          side: B
          orientation: down
          VUSB: none
          VCC: none
          P0: CP0
          P1: CP1
          P2: CP2
          P3: CP3
          P4: CP4
          P5: CP5
          P6: CP6
          P7: CP_INT
          P8: ENC_B
          P9: ENC_A
          P10: none

      xiao_note:
        what: text
        where: mcu
        adjust.shift: [0, -12]
        params:
          side: B
          text: XIAO BLE FACE DOWN

      xiao_bat_pos:
        what: pad
        where: xiao_pos_pad
        params:
          text_side: B
          net: BAT+
          text: BAT+
          shape: circle
          align: right
          width: 2
          height: 2

      xiao_reset:
        what: pad
        where: reset_pad
        params:
          text_side: B
          net: RST
          text: RST
          shape: circle
          align: right
          width: 2
          height: 2

      battery_jst:
        what: jst-ph-2
        where: jst
        params:
          BAT_P: RAW
          BAT_N: GND

      reset_button:
        # what: evqpuc
        what: reset-smd-top
        where: reset
        params:
          side: B
          from: GND
          to: RST

      reset_note:
        what: text
        where: reset
        adjust:
          shift: [-9, 0]
        params:
          side: B
          text: RESET
          justify: left

      power_slider:
        what: trislider
        where: power
        params:
          side: B
          posts: true
          vias: true
          COM: RAW
          A: BAT+

      power_label:
        what: text
        where: power
        adjust.shift: [-4.5, 0.6]
        params:
          side: B
          text: POWER
          justify: right

      power_on:
        what: text
        where: power
        adjust.shift: [-4.5, -0.8]
        params:
          side: B
          text: ON
          justify: right

      power_off:
        what: text
        where: power
        adjust.shift: [4.5, 0.6]
        params:
          side: B
          text: OFF
          justify: left

      mounting_holes:
        what: mountinghole
        where: screw

      board_logo:
        what: mushroom
        where: encoder
        adjust.shift: [1, 6]
        params:
          side: F

      keyboard_name:
        what: text
        where: matrix_pinky_bottom
        adjust.shift: [dx - 4.5, -0.85 hdy]
        params:
          side: F
          text: *keyboard_name
          layer: Cu
          size: 3
          thickness: 0.5
          justify: left

      board_version:
        what: text
        where.aggregate.parts: [thumbs_outer_spot, mirror_thumbs_outer_spot]
        adjust.shift: [0, -hdy]
        params:
          text: *version
          side: F

      board_repo:
        what: text
        where.aggregate.parts: [thumbs_outer_spot, mirror_thumbs_outer_spot]
        adjust.shift: [0, -0.65 dy]
        params:
          side: F
          text: *repo

      license_note:
        what: text
        where: mirror_matrix_pinky_bottom
        adjust.shift: [dx, -hdy]
        params:
          side: F
          text: *license
          justify: right

      license_logo:
        what: oshw
        where: mirror_matrix_pinky_bottom
        adjust.shift: [1.65 dx, -0.1 dy]
        params:
          side: F

      order_number:
        what: text
        where: encoder
        adjust.shift: [0, hdy - 2.75]
        params:
          side: F
          text: *order_text