bullet3

#include "btReducedDeformableContactConstraint.h"
#include <iostream>

// ================= static constraints ===================
btReducedDeformableStaticConstraint::btReducedDeformableStaticConstraint(
  btReducedDeformableBody* rsb, 
  btSoftBody::Node* node,
	const btVector3& ri,
	const btVector3& x0,
	const btVector3& dir,
  const btContactSolverInfo& infoGlobal,
	btScalar dt)
  : m_rsb(rsb), m_ri(ri), m_targetPos(x0), m_impulseDirection(dir), m_dt(dt), btDeformableStaticConstraint(node, infoGlobal)
{
	m_erp = 0.2;
	m_appliedImpulse = 0;

	// get impulse factor
  m_impulseFactorMatrix = rsb->getImpulseFactor(m_node->index);
	m_impulseFactor = (m_impulseFactorMatrix * m_impulseDirection).dot(m_impulseDirection);

	btScalar vel_error = btDot(-m_node->m_v, m_impulseDirection);
	btScalar pos_error = btDot(m_targetPos - m_node->m_x, m_impulseDirection);

	m_rhs = (vel_error + m_erp * pos_error / m_dt) / m_impulseFactor;
}

btScalar btReducedDeformableStaticConstraint::solveConstraint(const btContactSolverInfo& infoGlobal)
{
	// target velocity of fixed constraint is 0
	btVector3 deltaVa = getDeltaVa();
	btScalar deltaV_rel = btDot(deltaVa, m_impulseDirection);
  btScalar deltaImpulse = m_rhs - deltaV_rel / m_impulseFactor;
	m_appliedImpulse = m_appliedImpulse + deltaImpulse;

	btVector3 impulse = deltaImpulse * m_impulseDirection;
	applyImpulse(impulse);

	// calculate residual
	btScalar residualSquare = m_impulseFactor * deltaImpulse;
	residualSquare *= residualSquare;

	return residualSquare;
}
  
// this calls reduced deformable body's internalApplyFullSpaceImpulse
void btReducedDeformableStaticConstraint::applyImpulse(const btVector3& impulse)
{
	// apply full space impulse
	m_rsb->internalApplyFullSpaceImpulse(impulse, m_ri, m_node->index, m_dt);
}

btVector3 btReducedDeformableStaticConstraint::getDeltaVa() const
{
	return m_rsb->internalComputeNodeDeltaVelocity(m_rsb->getInterpolationWorldTransform(), m_node->index);
}

// ================= base contact constraints ===================
btReducedDeformableRigidContactConstraint::btReducedDeformableRigidContactConstraint(
  btReducedDeformableBody* rsb, 
  const btSoftBody::DeformableRigidContact& c, 
  const btContactSolverInfo& infoGlobal,
	btScalar dt)
  : m_rsb(rsb), m_dt(dt), btDeformableRigidContactConstraint(c, infoGlobal)
{
	m_nodeQueryIndex = 0;
	m_appliedNormalImpulse = 0;
  m_appliedTangentImpulse = 0;
	m_rhs = 0;
	m_rhs_tangent = 0;
	m_cfm = infoGlobal.m_deformable_cfm;
	m_cfm_friction = 0;
	m_erp = infoGlobal.m_deformable_erp;
	m_erp_friction = infoGlobal.m_deformable_erp;
	m_friction = infoGlobal.m_friction;

	m_collideStatic = m_contact->m_cti.m_colObj->isStaticObject();
	m_collideMultibody = (m_contact->m_cti.m_colObj->getInternalType() == btCollisionObject::CO_FEATHERSTONE_LINK);
}

void btReducedDeformableRigidContactConstraint::setSolverBody(const int bodyId, btSolverBody& solver_body)
{
	if (!m_collideMultibody)
	{
		m_solverBodyId = bodyId;
		m_solverBody = &solver_body;
		m_linearComponentNormal = -m_contactNormalA * m_solverBody->internalGetInvMass();
		btVector3	torqueAxis = -m_relPosA.cross(m_contactNormalA);
		m_angularComponentNormal = m_solverBody->m_originalBody->getInvInertiaTensorWorld() * torqueAxis;
		
		m_linearComponentTangent = m_contactTangent * m_solverBody->internalGetInvMass();
		btVector3 torqueAxisTangent = m_relPosA.cross(m_contactTangent);
		m_angularComponentTangent = m_solverBody->m_originalBody->getInvInertiaTensorWorld() * torqueAxisTangent;
	}
}

btVector3 btReducedDeformableRigidContactConstraint::getVa() const
{
	btVector3 Va(0, 0, 0);
	if (!m_collideStatic)
	{
		Va = btDeformableRigidContactConstraint::getVa();
	}
	return Va;
}

btScalar btReducedDeformableRigidContactConstraint::solveConstraint(const btContactSolverInfo& infoGlobal)
{
	// btVector3 Va = getVa();
	// btVector3 deltaVa = Va - m_bufferVelocityA;
	// if (!m_collideStatic)
	// {
		// std::cout << "moving collision!!!\n";
		// std::cout << "relPosA: " << m_relPosA[0] << "\t" << m_relPosA[1] << "\t" << m_relPosA[2] << "\n";
		// std::cout << "moving rigid linear_vel: " << m_solverBody->m_originalBody->getLinearVelocity()[0] << '\t'
		//  << m_solverBody->m_originalBody->getLinearVelocity()[1] << '\t'
		//   << m_solverBody->m_originalBody->getLinearVelocity()[2] << '\n';
	// }
	btVector3 deltaVa = getDeltaVa();
	btVector3 deltaVb = getDeltaVb();

	// if (!m_collideStatic)
	// {
	// 	std::cout << "deltaVa: " << deltaVa[0] << '\t' << deltaVa[1] << '\t' << deltaVa[2] << '\n';
	// 	std::cout << "deltaVb: " << deltaVb[0] << '\t' << deltaVb[1] << '\t' << deltaVb[2] << '\n';
	// }

	// get delta relative velocity and magnitude (i.e., how much impulse has been applied?)
	btVector3 deltaV_rel = deltaVa - deltaVb;
	btScalar deltaV_rel_normal = -btDot(deltaV_rel, m_contactNormalA);

	// if (!m_collideStatic)
	// {
	// 	std::cout << "deltaV_rel: " << deltaV_rel[0] << '\t' << deltaV_rel[1] << '\t' << deltaV_rel[2] << "\n";
	// 	std::cout << "deltaV_rel_normal: " << deltaV_rel_normal << "\n";
	// 	std::cout << "normal_A: " << m_contactNormalA[0] << '\t' << m_contactNormalA[1] << '\t' << m_contactNormalA[2] << '\n';
	// }
	
	// get the normal impulse to be applied
	btScalar deltaImpulse = m_rhs - m_appliedNormalImpulse * m_cfm - deltaV_rel_normal / m_normalImpulseFactor;
	// if (!m_collideStatic)
	// {
	// 	std::cout << "m_rhs: " << m_rhs << '\t' << "m_appliedNormalImpulse: "  << m_appliedNormalImpulse << "\n";
	// 	std::cout << "m_normalImpulseFactor: " << m_normalImpulseFactor << '\n';
	// }

	{
		// cumulative impulse that has been applied
		btScalar sum = m_appliedNormalImpulse + deltaImpulse;
		// if the cumulative impulse is pushing the object into the rigid body, set it zero
		if (sum < 0)
		{
			deltaImpulse = -m_appliedNormalImpulse;
			m_appliedNormalImpulse = 0;
		}
		else
		{
			m_appliedNormalImpulse = sum;
		}	
	}

	// if (!m_collideStatic)
	// {
	// 	std::cout << "m_appliedNormalImpulse: " << m_appliedNormalImpulse << '\n';
	// 	std::cout << "deltaImpulse: " << deltaImpulse << '\n';
	// }

	// residual is the nodal normal velocity change in current iteration
	btScalar residualSquare = deltaImpulse * m_normalImpulseFactor;	// get residual
	residualSquare *= residualSquare;

	
	// apply Coulomb friction (based on delta velocity, |dv_t| = |dv_n * friction|)
	btScalar deltaImpulse_tangent = 0;
	btScalar deltaImpulse_tangent2 = 0;
	{
		// calculate how much impulse is needed
		// btScalar deltaV_rel_tangent = btDot(deltaV_rel, m_contactTangent);
		// btScalar impulse_changed = deltaV_rel_tangent * m_tangentImpulseFactorInv;
		// deltaImpulse_tangent = m_rhs_tangent - impulse_changed;

		// btScalar sum = m_appliedTangentImpulse + deltaImpulse_tangent;
		btScalar lower_limit = - m_appliedNormalImpulse * m_friction;
		btScalar upper_limit = m_appliedNormalImpulse * m_friction;
		// if (sum > upper_limit)
		// {
		// 	deltaImpulse_tangent = upper_limit - m_appliedTangentImpulse;
		// 	m_appliedTangentImpulse = upper_limit;
		// }
		// else if (sum < lower_limit)
		// {
		// 	deltaImpulse_tangent = lower_limit - m_appliedTangentImpulse;
		// 	m_appliedTangentImpulse = lower_limit;
		// }
		// else
		// {
		// 	m_appliedTangentImpulse = sum;
		// }
		// 
		calculateTangentialImpulse(deltaImpulse_tangent, m_appliedTangentImpulse, m_rhs_tangent,
															 m_tangentImpulseFactorInv, m_contactTangent, lower_limit, upper_limit, deltaV_rel);
		
		if (m_collideMultibody)
		{
			calculateTangentialImpulse(deltaImpulse_tangent2, m_appliedTangentImpulse2, m_rhs_tangent2,
															   m_tangentImpulseFactorInv2, m_contactTangent2, lower_limit, upper_limit, deltaV_rel);
		}
															 

		if (!m_collideStatic)
		{
			// std::cout << "m_contactTangent: " << m_contactTangent[0] << "\t"  << m_contactTangent[1] << "\t"  << m_contactTangent[2] << "\n";
			// std::cout << "deltaV_rel_tangent: " << deltaV_rel_tangent << '\n';
			// std::cout << "deltaImpulseTangent: " << deltaImpulse_tangent << '\n';
			// std::cout << "m_appliedTangentImpulse: " << m_appliedTangentImpulse << '\n';
		}
	}

	// get the total impulse vector
	btVector3 impulse_normal = deltaImpulse * m_contactNormalA;
	btVector3 impulse_tangent = deltaImpulse_tangent * (-m_contactTangent);
	btVector3 impulse_tangent2 = deltaImpulse_tangent2 * (-m_contactTangent2);
	btVector3 impulse = impulse_normal + impulse_tangent + impulse_tangent2;

	applyImpulse(impulse);
	
	// apply impulse to the rigid/multibodies involved and change their velocities
	if (!m_collideStatic)
	{
		// std::cout << "linear_component: " << m_linearComponentNormal[0] << '\t'
		// 																	<< m_linearComponentNormal[1] << '\t'
		// 																	<< m_linearComponentNormal[2] << '\n';
		// std::cout << "angular_component: " << m_angularComponentNormal[0] << '\t'
		// 																	<< m_angularComponentNormal[1] << '\t'
		// 																	<< m_angularComponentNormal[2] << '\n';

		if (!m_collideMultibody)		// collision with rigid body
		{
			// std::cout << "rigid impulse applied!!\n";
			// std::cout << "delta Linear: " << m_solverBody->getDeltaLinearVelocity()[0] << '\t'
			// << m_solverBody->getDeltaLinearVelocity()[1] << '\t'
			// 	<< m_solverBody->getDeltaLinearVelocity()[2] << '\n';
			// std::cout << "delta Angular: " << m_solverBody->getDeltaAngularVelocity()[0] << '\t'
			// << m_solverBody->getDeltaAngularVelocity()[1] << '\t'
			// 	<< m_solverBody->getDeltaAngularVelocity()[2] << '\n';

			m_solverBody->internalApplyImpulse(m_linearComponentNormal, m_angularComponentNormal, deltaImpulse);
			m_solverBody->internalApplyImpulse(m_linearComponentTangent, m_angularComponentTangent, deltaImpulse_tangent);

			// std::cout << "after\n";
			// std::cout << "rigid impulse applied!!\n";
			// std::cout << "delta Linear: " << m_solverBody->getDeltaLinearVelocity()[0] << '\t'
			// << m_solverBody->getDeltaLinearVelocity()[1] << '\t'
			// 	<< m_solverBody->getDeltaLinearVelocity()[2] << '\n';
			// std::cout << "delta Angular: " << m_solverBody->getDeltaAngularVelocity()[0] << '\t'
			// << m_solverBody->getDeltaAngularVelocity()[1] << '\t'
			// 	<< m_solverBody->getDeltaAngularVelocity()[2] << '\n';
		}
		else		// collision with multibody
		{
			btMultiBodyLinkCollider* multibodyLinkCol = 0;
			multibodyLinkCol = (btMultiBodyLinkCollider*)btMultiBodyLinkCollider::upcast(m_contact->m_cti.m_colObj);
			if (multibodyLinkCol)
			{
				const btScalar* deltaV_normal = &m_contact->jacobianData_normal.m_deltaVelocitiesUnitImpulse[0];
				// apply normal component of the impulse
				multibodyLinkCol->m_multiBody->applyDeltaVeeMultiDof2(deltaV_normal, -deltaImpulse);
				
				// const int ndof = multibodyLinkCol->m_multiBody->getNumDofs() + 6;
				// std::cout << "deltaV_normal: ";
				// for (int i = 0; i < ndof; ++i)
				// {
				// 	std::cout << i << "\t" << deltaV_normal[i] << '\n';
				// }

				if (impulse_tangent.norm() > SIMD_EPSILON)
				{
					// apply tangential component of the impulse
					const btScalar* deltaV_t1 = &m_contact->jacobianData_t1.m_deltaVelocitiesUnitImpulse[0];
					multibodyLinkCol->m_multiBody->applyDeltaVeeMultiDof2(deltaV_t1, deltaImpulse_tangent);
					const btScalar* deltaV_t2 = &m_contact->jacobianData_t2.m_deltaVelocitiesUnitImpulse[0];
					multibodyLinkCol->m_multiBody->applyDeltaVeeMultiDof2(deltaV_t2, deltaImpulse_tangent2);
				}
			}
		}
	}
	return residualSquare;
}

void btReducedDeformableRigidContactConstraint::calculateTangentialImpulse(btScalar& deltaImpulse_tangent, 
																		 																			 btScalar& appliedImpulse, 
																																					 const btScalar rhs_tangent,
																																					 const btScalar tangentImpulseFactorInv,
																																					 const btVector3& tangent,
																		 																			 const btScalar lower_limit,
																																					 const btScalar upper_limit,
																																					 const btVector3& deltaV_rel)
{
	btScalar deltaV_rel_tangent = btDot(deltaV_rel, tangent);
	btScalar impulse_changed = deltaV_rel_tangent * tangentImpulseFactorInv;
	deltaImpulse_tangent = rhs_tangent - m_cfm_friction * appliedImpulse - impulse_changed;

	btScalar sum = appliedImpulse + deltaImpulse_tangent;
	if (sum > upper_limit)
	{
		deltaImpulse_tangent = upper_limit - appliedImpulse;
		appliedImpulse = upper_limit;
	}
	else if (sum < lower_limit)
	{
		deltaImpulse_tangent = lower_limit - appliedImpulse;
		appliedImpulse = lower_limit;
	}
	else
	{
		appliedImpulse = sum;
	}
}

// ================= node vs rigid constraints ===================
btReducedDeformableNodeRigidContactConstraint::btReducedDeformableNodeRigidContactConstraint(
  btReducedDeformableBody* rsb, 
  const btSoftBody::DeformableNodeRigidContact& contact, 
  const btContactSolverInfo& infoGlobal,
	btScalar dt)
  : m_node(contact.m_node), btReducedDeformableRigidContactConstraint(rsb, contact, infoGlobal, dt)
{
	m_contactNormalA = contact.m_cti.m_normal;
  m_contactNormalB = -contact.m_cti.m_normal;

	if (contact.m_node->index < rsb->m_nodes.size())
	{
		m_nodeQueryIndex = contact.m_node->index;
	}
	else
	{
		m_nodeQueryIndex = m_node->index - rsb->m_nodeIndexOffset;
	}

	if (m_contact->m_cti.m_colObj->getInternalType() == btCollisionObject::CO_RIGID_BODY)
	{
		m_relPosA = contact.m_c1;
	}
	else
	{
		m_relPosA = btVector3(0,0,0);
	}
	m_relPosB = m_node->m_x - m_rsb->getRigidTransform().getOrigin();

	if (m_collideStatic)		// colliding with static object, only consider reduced deformable body's impulse factor
	{
		m_impulseFactor = m_rsb->getImpulseFactor(m_nodeQueryIndex);
	}
	else		// colliding with dynamic object, consider both reduced deformable and rigid body's impulse factors
	{
		m_impulseFactor = m_rsb->getImpulseFactor(m_nodeQueryIndex) + contact.m_c0;
	}

	m_normalImpulseFactor = (m_impulseFactor * m_contactNormalA).dot(m_contactNormalA);
	m_tangentImpulseFactor = 0;

	warmStarting();
}

void btReducedDeformableNodeRigidContactConstraint::warmStarting()
{
	btVector3 va = getVa();
	btVector3 vb = getVb();
	m_bufferVelocityA = va;
	m_bufferVelocityB = vb;

	// we define the (+) direction of errors to be the outward surface normal of the rigid object
	btVector3 v_rel = vb - va;
	// get tangent direction of the relative velocity
	btVector3 v_tangent = v_rel - v_rel.dot(m_contactNormalA) * m_contactNormalA;
	if (v_tangent.norm() < SIMD_EPSILON)
	{
		m_contactTangent = btVector3(0, 0, 0);
		// tangent impulse factor
		m_tangentImpulseFactor = 0;
		m_tangentImpulseFactorInv = 0;
	}
	else
	{
		if (!m_collideMultibody)
		{
			m_contactTangent = v_tangent.normalized();
			m_contactTangent2.setZero();
			// tangent impulse factor 1
			m_tangentImpulseFactor = (m_impulseFactor * m_contactTangent).dot(m_contactTangent);
			m_tangentImpulseFactorInv = btScalar(1) / m_tangentImpulseFactor;
			// tangent impulse factor 2
			m_tangentImpulseFactor2 = 0;
			m_tangentImpulseFactorInv2 = 0;
		}
		else	// multibody requires 2 contact directions
		{
			m_contactTangent = m_contact->t1;
			m_contactTangent2 = m_contact->t2;

			// tangent impulse factor 1
			m_tangentImpulseFactor = (m_impulseFactor * m_contactTangent).dot(m_contactTangent);
			m_tangentImpulseFactorInv = btScalar(1) / m_tangentImpulseFactor;
			// tangent impulse factor 2
			m_tangentImpulseFactor2 = (m_impulseFactor * m_contactTangent2).dot(m_contactTangent2);
			m_tangentImpulseFactorInv2 = btScalar(1) / m_tangentImpulseFactor2;
		}
	}


	// initial guess for normal impulse
	{
		btScalar velocity_error = btDot(v_rel, m_contactNormalA);	// magnitude of relative velocity
		btScalar position_error = 0;
		if (m_penetration > 0)
		{
			velocity_error += m_penetration / m_dt;
		}
		else
		{
			// add penetration correction vel
			position_error = m_penetration * m_erp / m_dt;
		}
		// get the initial estimate of impulse magnitude to be applied
		m_rhs = -(velocity_error + position_error) / m_normalImpulseFactor;
	}

	// initial guess for tangential impulse
	{
		btScalar velocity_error = btDot(v_rel, m_contactTangent);
		m_rhs_tangent = velocity_error * m_tangentImpulseFactorInv;

		if (m_collideMultibody)
		{
			btScalar velocity_error2 = btDot(v_rel, m_contactTangent2);
			m_rhs_tangent2 = velocity_error2 * m_tangentImpulseFactorInv2;
		}
	}

	// warm starting
	// applyImpulse(m_rhs * m_contactNormalA);
	// if (!m_collideStatic)
	// {
	// 	const btSoftBody::sCti& cti = m_contact->m_cti;
	// 	if (cti.m_colObj->getInternalType() == btCollisionObject::CO_RIGID_BODY)
	// 	{
	// 		m_solverBody->internalApplyImpulse(m_linearComponentNormal, m_angularComponentNormal, -m_rhs);
	// 	}
	// }
}

btVector3 btReducedDeformableNodeRigidContactConstraint::getVb() const
{
	return m_node->m_v;
}

btVector3 btReducedDeformableNodeRigidContactConstraint::getDeltaVa() const
{
	btVector3 deltaVa(0, 0, 0);
	if (!m_collideStatic)
	{
		if (!m_collideMultibody)		// for rigid body
		{
			deltaVa = m_solverBody->internalGetDeltaLinearVelocity() + m_solverBody->internalGetDeltaAngularVelocity().cross(m_relPosA);
		}
		else		// for multibody
		{
			btMultiBodyLinkCollider* multibodyLinkCol = 0;
			multibodyLinkCol = (btMultiBodyLinkCollider*)btMultiBodyLinkCollider::upcast(m_contact->m_cti.m_colObj);
			if (multibodyLinkCol)
			{
				const int ndof = multibodyLinkCol->m_multiBody->getNumDofs() + 6;
				const btScalar* J_n = &m_contact->jacobianData_normal.m_jacobians[0];
				const btScalar* J_t1 = &m_contact->jacobianData_t1.m_jacobians[0];
				const btScalar* J_t2 = &m_contact->jacobianData_t2.m_jacobians[0];
				const btScalar* local_dv = multibodyLinkCol->m_multiBody->getDeltaVelocityVector();
				// add in the normal component of the va
				btScalar vel = 0;
				for (int k = 0; k < ndof; ++k)
				{
					vel += local_dv[k] * J_n[k];
				}
				deltaVa = m_contact->m_cti.m_normal * vel;
				
				// add in the tangential components of the va
				vel = 0;
				for (int k = 0; k < ndof; ++k)
				{
					vel += local_dv[k] * J_t1[k];
				}
				deltaVa += m_contact->t1 * vel;

				vel = 0;
				for (int k = 0; k < ndof; ++k)
				{
					vel += local_dv[k] * J_t2[k];
				}
				deltaVa += m_contact->t2 * vel;
			}
		}
	}
	return deltaVa;
}

btVector3 btReducedDeformableNodeRigidContactConstraint::getDeltaVb() const
{	
	// std::cout << "node: " << m_node->index << '\n';
	return m_rsb->internalComputeNodeDeltaVelocity(m_rsb->getInterpolationWorldTransform(), m_nodeQueryIndex);
}

btVector3 btReducedDeformableNodeRigidContactConstraint::getSplitVb() const
{
	return m_node->m_splitv;
}

btVector3 btReducedDeformableNodeRigidContactConstraint::getDv(const btSoftBody::Node* node) const
{
	return m_total_normal_dv + m_total_tangent_dv;
}

void btReducedDeformableNodeRigidContactConstraint::applyImpulse(const btVector3& impulse)
{
  m_rsb->internalApplyFullSpaceImpulse(impulse, m_relPosB, m_nodeQueryIndex, m_dt);
	// m_rsb->applyFullSpaceImpulse(impulse, m_relPosB, m_node->index, m_dt);
	// m_rsb->mapToFullVelocity(m_rsb->getInterpolationWorldTransform());
	// if (!m_collideStatic)
	// {
	// 	// std::cout << "impulse applied: " << impulse[0] << '\t' << impulse[1] << '\t' << impulse[2] << '\n';
	// 	// std::cout << "node: " << m_node->index << " vel: " << m_node->m_v[0] << '\t' << m_node->m_v[1] << '\t' << m_node->m_v[2] << '\n';
	// 	btVector3 v_after = getDeltaVb() + m_node->m_v;
	// 	// std::cout << "vel after: " << v_after[0] << '\t' << v_after[1] << '\t' << v_after[2] << '\n';
	// }
	// std::cout << "node: " << m_node->index << " pos: " << m_node->m_x[0] << '\t' << m_node->m_x[1] << '\t' << m_node->m_x[2] << '\n';
}

// ================= face vs rigid constraints ===================
btReducedDeformableFaceRigidContactConstraint::btReducedDeformableFaceRigidContactConstraint(
  btReducedDeformableBody* rsb, 
  const btSoftBody::DeformableFaceRigidContact& contact, 
  const btContactSolverInfo& infoGlobal,
	btScalar dt, 
  bool useStrainLimiting)
  : m_face(contact.m_face), m_useStrainLimiting(useStrainLimiting), btReducedDeformableRigidContactConstraint(rsb, contact, infoGlobal, dt)
{}

btVector3 btReducedDeformableFaceRigidContactConstraint::getVb() const
{
	const btSoftBody::DeformableFaceRigidContact* contact = getContact();
	btVector3 vb = m_face->m_n[0]->m_v * contact->m_bary[0] + m_face->m_n[1]->m_v * contact->m_bary[1] + m_face->m_n[2]->m_v * contact->m_bary[2];
	return vb;
}

btVector3 btReducedDeformableFaceRigidContactConstraint::getSplitVb() const
{
	const btSoftBody::DeformableFaceRigidContact* contact = getContact();
	btVector3 vb = (m_face->m_n[0]->m_splitv) * contact->m_bary[0] + (m_face->m_n[1]->m_splitv) * contact->m_bary[1] + (m_face->m_n[2]->m_splitv) * contact->m_bary[2];
	return vb;
}

btVector3 btReducedDeformableFaceRigidContactConstraint::getDv(const btSoftBody::Node* node) const
{
	btVector3 face_dv = m_total_normal_dv + m_total_tangent_dv;
	const btSoftBody::DeformableFaceRigidContact* contact = getContact();
	if (m_face->m_n[0] == node)
	{
		return face_dv * contact->m_weights[0];
	}
	if (m_face->m_n[1] == node)
	{
		return face_dv * contact->m_weights[1];
	}
	btAssert(node == m_face->m_n[2]);
	return face_dv * contact->m_weights[2];
}

void btReducedDeformableFaceRigidContactConstraint::applyImpulse(const btVector3& impulse)
{
  //
}