Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
a72daf136This file is pinned to the selected release. Download the original to open it in your design tool.
[machine]
machine_name = Hephestos
machine_type = Hephestos
machine_width = 215
machine_depth = 210
machine_height = 180
machine_center_is_zero = False
has_heated_bed = False
gcode_flavor = RepRap (Marlin/Sprinter)
extruder_amount = 1
serial_baud = 115200
[profile]
filament_diameter = 1.75
nozzle_size = 0.4
layer_height = 0.2
print_speed = 50
print_temperature = 210
travel_speed = 130
wall_thickness = 0.8
retraction_enable = True
solid_layer_thickness = 0.6
fill_density = 20
retraction_speed = 50.0
retraction_amount = 4
retraction_min_travel = 1.5
retraction_combing = True
retraction_minimal_extrusion = 0.1
bottom_thickness = 0.3
bottom_layer_speed = 20
cool_min_layer_time = 5
fan_enabled = True
filament_flow = 100.0
[alterations]
start.gcode =
; -- START GCODE --
;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;Uncomment to add your own temperature line
;M109 S{print_temperature}
;Uncomment to add your own bed temperature line
;M190 S{print_bed_temperature}
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F1200 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E5 ;extrude 5mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
;Uncomment to put a printing message on LCD screen
;M117 Printing...
; -- end of START GCODE --
end.gcode =
; -- END GCODE --
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-5 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+80 F{travel_speed} ;move Z up
G90 ;absolute positioning
G1 X0 Y180 F{travel_speed} ;move Z up a bit and retract filament even more the way
M84 ;steppers off
; -- end of END GCODE --