BCN3D-Cura-SourceCode

"""
The profile module contains all the settings for Cura.
These settings can be globally accessed and modified.
"""
from __future__ import division
__copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"

import os
import traceback
import math
import re
import zlib
import base64
import time
import wx
import sys
import platform
import glob
import string
import stat
import types
import cPickle as pickle
import numpy
if sys.version_info[0] < 3:
    import ConfigParser
else:
    import configparser as ConfigParser

from Cura.util import version
from Cura.util import validators

#The settings dictionary contains a key/value reference to all possible settings. With the setting name as key.
settingsDictionary = {}
#The settings list is used to keep a full list of all the settings. This is needed to keep the settings in the proper order,
# as the dictionary will not contain insertion order.
settingsList = []

#Currently selected machine (by index) Cura support multiple machines in the same preferences and can switch between them.
# Each machine has it's own index and unique name.
_selectedMachineIndex = 0

class setting(object):
    """
        A setting object contains a configuration setting. These are globally accessible trough the quick access functions
        and trough the settingsDictionary function.
        Settings can be:
        * profile settings (settings that effect the slicing process and the print result)
        * preferences (settings that effect how cura works and acts)
        * machine settings (settings that relate to the physical configuration of your machine)
        * alterations (bad name copied from Skeinforge. These are the start/end code pieces)
        Settings have validators that check if the value is valid, but do not prevent invalid values!
        Settings have conditions that enable/disable this setting depending on other settings. (Ex: Dual-extrusion)
    """
    def __init__(self, name, default, type, category, subcategory):
        self._name = name
        self._label = name
        self._tooltip = ''
        self._default = unicode(default)
        self._values = []
        self._type = type
        self._category = category
        self._subcategory = subcategory
        self._expert_sub_category = None
        self._validators = []
        self._conditions = []

        if type is types.FloatType:
            validators.validFloat(self)
        elif type is types.IntType:
            validators.validInt(self)

        global settingsDictionary
        settingsDictionary[name] = self
        global settingsList
        settingsList.append(self)

    def setLabel(self, label, tooltip = ''):
        self._label = label
        self._tooltip = tooltip
        return self

    def setRange(self, minValue=None, maxValue=None):
        if len(self._validators) < 1:
            return
        self._validators[0].minValue = minValue
        self._validators[0].maxValue = maxValue
        return self

    def getLabel(self):
        return _(self._label)

    def getTooltip(self):
        return _(self._tooltip)

    def getCategory(self):
        return self._category

    def getSubCategory(self):
        return self._subcategory

    def getExpertSubCategory(self):
        return self._expert_sub_category

    def setExpertSubCategory(self, expert_sub_category):
        self._expert_sub_category = expert_sub_category
        return self

    def isPreference(self):
        return self._category == 'preference'

    def isMachineSetting(self):
        return self._category == 'machine'

    def isAlteration(self):
        return self._category == 'alteration'

    def isProfile(self):
        return not self.isAlteration() and not self.isPreference() and not self.isMachineSetting()

    def getName(self):
        return self._name

    def getType(self):
        return self._type

    def getValue(self, index = None):
        if index is None:
            index = self.getValueIndex()
        if index >= len(self._values):
            return self._default
        return self._values[index]

    def getDefault(self):
        return self._default

    def setValue(self, value, index = None):
        if index is None:
            index = self.getValueIndex()
        while index >= len(self._values):
            self._values.append(self._default)
        self._values[index] = unicode(value)

    def getValueIndex(self):
        if self.isMachineSetting() or self.isProfile() or self.isAlteration():
            global _selectedMachineIndex
            return _selectedMachineIndex
        return 0

    def validate(self):
        result = validators.SUCCESS
        msgs = []
        for validator in self._validators:
            res, err = validator.validate()
            if res == validators.ERROR:
                result = res
            elif res == validators.WARNING and result != validators.ERROR:
                result = res
            if len(err) > 0:
                msgs.append(err)
        return result, '\n'.join(msgs)

    def addCondition(self, conditionFunction):
        self._conditions.append(conditionFunction)

    def checkConditions(self):
        for condition in self._conditions:
            if not condition():
                return False
        return True

#########################################################
## Settings
#########################################################

#Define a fake _() function to fake the gettext tools in to generating strings for the profile settings.
def _(n):
    return n

setting('layer_height',              0.1, float, 'basic',    _('Quality')).setRange(0.0001).setLabel(_("Layer height (mm)"), _("Layer height in millimeters.\nThis is the most important setting to determine the quality of\n your print. With BCN3D Technologies printers, normal \nquality prints are 0.2mm and high quality prints are 0.1mm"))
setting('wall_thickness',            0.8, float, 'basic',    _('Quality')).setRange(0.0).setLabel(_("Shell thickness (mm)"), _("Thickness of the outside shell in the horizontal direction.\nThis is used in combination with the nozzle size to define the number of perimeter lines and the thickness of those \nperimeter lines."))
setting('retraction_enable',        True, bool,  'basic',    _('Quality')).setExpertSubCategory(_('Retraction')).setLabel(_("Enable retraction"), _("Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab."))
setting('solid_layer_thickness',     0.6, float, 'basic',    _('Fill')).setRange(0).setLabel(_("Bottom/Top thickness (mm)"), _("This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiple of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part."))
setting('fill_density',               20, float, 'basic',    _('Fill')).setExpertSubCategory(_('Infill')).setRange(0, 100).setLabel(_("Fill Density (%)"), _("This controls how densely filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough.\nThis won't affect the outside of the print and only adjusts how strong the part becomes."))
setting('nozzle_size',               0.4, float, 'advanced', _('Machine')).setRange(0.1,10).setLabel(_("Nozzle size (mm)"), _("The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings."))
setting('print_speed',                50, float, 'basic',    _('Speed and Temperature')).setRange(1).setLabel(_("Print speed (mm/s)"), _("Speed at which printing happens. A well adjusted BCN3D Technologies printer can reach 100mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this."))
setting('print_temperature',         210, int,   'basic',    _('Speed and Temperature')).setRange(0,340).setLabel(_("Printing temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 245C or higher is required."))
setting('print_temperature2',        210, int,   'basic',    _('Speed and Temperature')).setRange(0,340).setLabel(_("2nd nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 245C or higher is required."))
setting('print_temperature3',          0, int,   'basic',    _('Speed and Temperature')).setRange(0,340).setLabel(_("3th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 245C or higher is required."))
setting('print_temperature4',          0, int,   'basic',    _('Speed and Temperature')).setRange(0,340).setLabel(_("4th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 245C or higher is required."))
setting('print_temperature5',          0, int,   'basic',    _('Speed and Temperature')).setRange(0,340).setLabel(_("5th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 245C or higher is required."))
setting('print_bed_temperature',      45, int,   'basic',    _('Speed and Temperature')).setRange(0,340).setLabel(_("Bed temperature (C)"), _("Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."))
setting('support',                'None', [_('None'), _('Touching buildplate'), _('Everywhere')], 'basic', _('Support')).setExpertSubCategory(_('Support')).setLabel(_("Support type"), _("Type of support structure build.\n\"Touching buildplate\" is the most commonly used support setting.\n\nNone does not do any support.\nTouching buildplate only creates support where the support structure will touch the build platform.\nEverywhere creates support even on top of parts of the model."))
setting('platform_adhesion',      'None', [_('None'), _('Brim'), _('Raft')], 'basic', _('Support')).setExpertSubCategory([_('Skirt'), _('Brim'), _('Raft')]).setLabel(_("Platform adhesion type"), _("Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and it is the recommended option.\nRaft adds a thick raster below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)"))
setting('support_dual_extrusion',  'Both', [_('Both'), _('First extruder'), _('Second extruder')], 'basic', _('Support')).setLabel(_("Support dual extrusion"), _("Which extruder to use for support material, for break-away support you can use both extruders.\nBut if one of the materials is more expensive then the other you could select an extruder to use for support material. This causes more extruder switches.\nYou can also use the 2nd extruder for soluble support materials."))
setting('wipe_tower',              False, bool,  'basic',    _('Dual extrusion')).setLabel(_("Wipe & prime tower"), _("The wipe-tower is a tower printed on every layer when switching between nozzles.\nThe old nozzle is wiped off on the tower before the new nozzle is used to print the 2nd color."))
setting('wipe_tower_volume',          15, float, 'expert',   _('Dual extrusion')).setLabel(_("Wipe & prime tower volume per layer (mm3)"), _("The amount of material put in the wipe/prime tower.\nThis is done in volume because in general you want to extrude a\ncertain amount of volume to get the extruder going, independent on the layer height.\nThis means that with thinner layers, your tower gets bigger."))
setting('ooze_shield',             False, bool,  'basic',    _('Dual extrusion')).setLabel(_("Ooze shield"), _("The ooze shield is a 1 line thick shell around the object which stands a few mm from the object.\nThis shield catches any oozing from the unused nozzle in dual-extrusion."))
setting('filament_diameter',        2.88, float, 'basic',    _('Filament')).setRange(1).setLabel(_("Diameter (mm)"), _("Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to calibrate it, a higher number means less extrusion, a smaller number generates more extrusion."))
setting('filament_diameter2',          0, float, 'basic',    _('Filament')).setRange(0).setLabel(_("Diameter2 (mm)"), _("Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter as for nozzle 1."))
setting('filament_diameter3',          0, float, 'basic',    _('Filament')).setRange(0).setLabel(_("Diameter3 (mm)"), _("Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter as for nozzle 1."))
setting('filament_diameter4',          0, float, 'basic',    _('Filament')).setRange(0).setLabel(_("Diameter4 (mm)"), _("Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter as for nozzle 1."))
setting('filament_diameter5',          0, float, 'basic',    _('Filament')).setRange(0).setLabel(_("Diameter5 (mm)"), _("Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter as for nozzle 1."))
setting('filament_flow',            100., float, 'basic',    _('Filament')).setRange(5,300).setLabel(_("Flow (%)"), _("Flow compensation, the amount of material extruded is multiplied by this value"))
setting('retraction_speed',         40.0, float, 'advanced', _('Retraction')).setRange(0.1).setLabel(_("Speed (mm/s)"), _("Speed at which the filament is retracted, a higher retraction speed works better. But a very high retraction speed can lead to filament grinding."))
setting('retraction_amount',         4.5, float, 'advanced', _('Retraction')).setRange(0).setLabel(_("Distance (mm)"), _("Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm seems to generate good results."))
setting('retraction_dual_amount',   16.5, float, 'advanced', _('Retraction')).setRange(0).setLabel(_("Dual extrusion switch amount (mm)"), _("Amount of retraction when switching nozzle with dual-extrusion, set at 0 for no retraction at all. A value of 16.0mm seems to generate good results."))
setting('retraction_min_travel',     1.5, float, 'expert',   _('Retraction')).setRange(0).setLabel(_("Minimum travel (mm)"), _("Minimum amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area."))
setting('retraction_combing',      'All',  [_('Off'),_('All'),_('No Skin')], 'expert', _('Retraction')).setLabel(_("Enable combing"), _("Combing is the act of avoiding holes in the print for the head to travel over. If combing is \'Off\' the printer head moves straight from the start point to the end point and it will always retract.  If \'All\', enable combing on all surfaces.  If \'No Skin\', enable combing on all except skin surfaces."))
setting('retraction_minimal_extrusion',0.02, float,'expert', _('Retraction')).setRange(0).setLabel(_("Minimal extrusion before retracting (mm)"), _("The minimal amount of extrusion that needs to be done before retracting again if a retraction needs to happen before this minimal is reached the retraction is ignored.\nThis avoids retracting a lot on the same piece of filament which flattens the filament and causes grinding issues."))
setting('retraction_hop',            0.0, float, 'expert',   _('Retraction')).setRange(0).setLabel(_("Z hop when retracting (mm)"), _("When a retraction is done, the head is lifted by this amount to travel over the print. A value of 0.075 works well. This feature has a lot of positive effect on delta towers."))
setting('bottom_thickness',          0.3, float, 'advanced', _('Quality')).setRange(0).setLabel(_("Initial layer thickness (mm)"), _("Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers."))
setting('layer0_width_factor',       100, float, 'advanced', _('Quality')).setRange(50, 300).setLabel(_("Initial layer line width (%)"), _("Extra width factor for the extrusion on the first layer, on some printers it's good to have wider extrusion on the first layer to get better bed adhesion."))
setting('object_sink',               0.0, float, 'advanced', _('Quality')).setRange(0).setLabel(_("Cut off object bottom (mm)"), _("Sinks the object into the platform, this can be used for objects that do not have a flat bottom and thus create a too small first layer."))
#setting('enable_skin',             False, bool,  'advanced', _('Quality')).setLabel(_("Duplicate outlines"), _("Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality."))
setting('overlap_dual',             0.15, float, 'advanced', _('Quality')).setLabel(_("Dual extrusion overlap (mm)"), _("Add a certain amount of overlapping extrusion on dual-extrusion prints. This bonds the different colors together."))
setting('travel_speed',            150.0, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Travel speed (mm/s)"), _("Speed at which travel moves are done, a well built BCN3D Technologies printer can reach speeds of 250mm/s. But some machines might miss steps then."))
setting('bottom_layer_speed',         20, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Bottom layer speed (mm/s)"), _("Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed."))
setting('infill_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Infill speed (mm/s)"), _("Speed at which infill parts are printed. If set to 0 then the print speed is used for the infill. Printing the infill faster can greatly reduce printing time, but this can negatively affect print quality."))
setting('solidarea_speed',           0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Top/bottom speed (mm/s)"), _("Speed at which top/bottom parts are printed. If set to 0 then the print speed is used for the infill. Printing the top/bottom faster can greatly reduce printing time, but this can negatively affect print quality."))
setting('inset0_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Outer shell speed (mm/s)"), _("Speed at which outer shell is printed. If set to 0 then the print speed is used. Printing the outer shell at a lower speed improves the final skin quality. However, having a large difference between the inner shell speed and the outer shell speed will effect quality in a negative way."))
setting('insetx_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Inner shell speed (mm/s)"), _("Speed at which inner shells are printed. If set to 0 then the print speed is used. Printing the inner shell faster then the outer shell will reduce printing time. It is good to set this somewhere in between the outer shell speed and the infill/printing speed."))
setting('cool_min_layer_time',         5, float, 'advanced', _('Cool')).setRange(0).setLabel(_("Minimal layer time (sec)"), _("Minimum time spent in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spent at least this amount of seconds printing this layer."))
setting('fan_enabled',              True, bool,  'advanced', _('Cool')).setExpertSubCategory(_('Cool')).setLabel(_("Enable cooling fan"), _("Enable the cooling fan during the print. The extra cooling from the cooling fan is essential during faster prints."))

setting('skirt_line_count',            1, int,   'expert', _('Skirt')).setRange(0).setLabel(_("Line count"), _("The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects."))
setting('skirt_gap',                 3.0, float, 'expert', _('Skirt')).setRange(0).setLabel(_("Start distance (mm)"), _("The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance."))
setting('skirt_minimal_length',    150.0, float, 'expert', _('Skirt')).setRange(0).setLabel(_("Minimal length (mm)"), _("The minimal length of the skirt, if this minimal length is not reached it will add more skirt lines to reach this minimal lenght.\nNote: If the line count is set to 0 this is ignored."))
setting('fan_full_height',           0.5, float, 'expert',   _('Cool')).setRange(0).setLabel(_("Fan full on at height (mm)"), _("The height at which the fan is turned on completely. For the layers below this the fan speed is scaled linearly with the fan off at layer 0."))
setting('fan_speed',                 100, int,   'expert',   _('Cool')).setRange(0,100).setLabel(_("Fan speed min (%)"), _("When the fan is turned on, it is enabled at this speed setting. If cool slows down the layer, the fan is adjusted between the min and max speed. Minimal fan speed is used if the layer is not slowed down due to cooling."))
setting('fan_speed_max',             100, int,   'expert',   _('Cool')).setRange(0,100).setLabel(_("Fan speed max (%)"), _("When the fan is turned on, it is enabled at this speed setting. If cool slows down the layer, the fan is adjusted between the min and max speed. Maximal fan speed is used if the layer is slowed down due to cooling by more than 200%."))
setting('cool_min_feedrate',          10, float, 'expert',   _('Cool')).setRange(0).setLabel(_("Minimum speed (mm/s)"), _("The minimal layer time can cause the print to slow down so much it starts to ooze. The minimal feedrate protects against this. Even if a print gets slowed down it will never be slower than this minimal speed."))
setting('cool_head_lift',          False, bool,  'expert',   _('Cool')).setLabel(_("Cool head lift"), _("Lift the head if the minimal speed is hit because of cool slowdown, and wait the extra time so the minimal layer time is always hit."))
setting('solid_top', True, bool, 'expert', _('Infill')).setLabel(_("Solid infill top"), _("Create a solid top surface, if set to false the top is filled with the fill percentage. Useful for cups/vases."))
setting('solid_bottom', True, bool, 'expert', _('Infill')).setLabel(_("Solid infill bottom"), _("Create a solid bottom surface, if set to false the bottom is filled with the fill percentage. Useful for buildings."))
setting('fill_overlap', 15, int, 'expert', _('Infill')).setRange(0,100).setLabel(_("Infill overlap (%)"), _("Amount of overlap between the infill and the walls. There is a slight overlap with the walls and the infill so the walls connect firmly to the infill."))
setting('perimeter_before_infill', False, bool, 'expert', _('Infill')).setLabel(_("Infill prints after perimeters"), _("Print infill after perimeter lines. This can reduce infill from showing through the surface. If not checked, infill will print before perimeter lines."))
setting('support_type', 'Lines', ['Grid', 'Lines'], 'expert', _('Support')).setLabel(_("Structure type"), _("The type of support structure.\nGrid is very strong and can come off in 1 piece, however, sometimes it is too strong.\nLines are single walled lines that break off one at a time. Which is more work to remove, but as it is less strong it does work better on tricky prints."))
setting('support_angle', 60, float, 'expert', _('Support')).setRange(0,90).setLabel(_("Overhang angle for support (deg)"), _("The minimal angle that overhangs need to have to get support. With 90 degree being horizontal and 0 degree being vertical."))
setting('support_fill_rate', 15, int, 'expert', _('Support')).setRange(0,100).setLabel(_("Fill amount (%)"), _("Amount of infill structure in the support material, less material gives weaker support which is easier to remove. 15% seems to be a good average."))
setting('support_xy_distance', 0.7, float, 'expert', _('Support')).setRange(0,10).setLabel(_("Distance X/Y (mm)"), _("Distance of the support material from the print, in the X/Y directions.\n0.7mm gives a nice distance from the print so the support does not stick to the print."))
setting('support_z_distance', 0.15, float, 'expert', _('Support')).setRange(0,10).setLabel(_("Distance Z (mm)"), _("Distance from the top/bottom of the support to the print. A small gap here makes it easier to remove the support but makes the print a bit uglier.\n0.15mm gives a good seperation of the support material."))
setting('spiralize', False, bool, 'expert', _('Black Magic')).setLabel(_("Spiralize the outer contour"), _("Spiralize is smoothing out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid object into a single walled print with a solid bottom.\nThis feature used to be called Joris in older versions."))
setting('simple_mode', False, bool, 'expert', _('Black Magic')).setLabel(_("Only follow mesh surface"), _("Only follow the mesh surfaces of the 3D model, do not do anything else. No infill, no top/bottom, nothing."))
#setting('bridge_speed', 100, int, 'expert', 'Bridge').setRange(0,100).setLabel(_("Bridge speed (%)"), _("Speed at which layers with bridges are printed, compared to normal printing speed."))
setting('brim_line_count', 20, int, 'expert', _('Brim')).setRange(1,100).setLabel(_("Brim line amount"), _("The amount of lines used for a brim, more lines means a larger brim which sticks better, but this also makes your effective print area smaller."))
setting('raft_margin', 5.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Extra margin (mm)"), _("If the raft is enabled, this is the extra raft area around the object which is also rafted. Increasing this margin will create a stronger raft while using more material and leaving less area for your print."))
setting('raft_line_spacing', 3.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Line spacing (mm)"), _("When you are using the raft this is the distance between the centerlines of the raft line."))
setting('raft_base_thickness', 0.3, float, 'expert', _('Raft')).setRange(0).setLabel(_("Base thickness (mm)"), _("When you are using the raft this is the thickness of the base layer which is put down."))
setting('raft_base_linewidth', 1.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Base line width (mm)"), _("When you are using the raft this is the width of the base layer lines which are put down."))
setting('raft_interface_thickness', 0.27, float, 'expert', _('Raft')).setRange(0).setLabel(_("Interface thickness (mm)"), _("When you are using the raft this is the thickness of the interface layer which is put down."))
setting('raft_interface_linewidth', 0.4, float, 'expert', _('Raft')).setRange(0).setLabel(_("Interface line width (mm)"), _("When you are using the raft this is the width of the interface layer lines which are put down."))
setting('raft_airgap_all', 0.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Airgap"), _("Gap between the last layer of the raft the whole print."))
setting('raft_airgap', 0.22, float, 'expert', _('Raft')).setRange(0).setLabel(_("First Layer Airgap"), _("Gap between the last layer of the raft and the first printing layer. A small gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This value is added on top of the 'Airgap' setting."))
setting('raft_surface_layers', 2, int, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layers"), _("Amount of surface layers put on top of the raft, these are fully filled layers on which the model is printed."))
setting('raft_surface_thickness', 0.27, float, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layer thickness (mm)"), _("Thickness of each surface layer."))
setting('raft_surface_linewidth', 0.4, float, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layer line width (mm)"), _("Width of the lines for each surface layer."))
setting('fix_horrible_union_all_type_a', True,  bool, 'expert', _('Fix horrible')).setLabel(_("Combine everything (Type-A)"), _("This expert option adds all parts of the model together. The result is usually that internal cavities disappear. Depending on the model this can be intended or not. Enabling this option is at your own risk. Type-A is dependent on the model normals and tries to keep some internal holes intact. Type-B ignores all internal holes and only keeps the outside shape per layer."))
setting('fix_horrible_union_all_type_b', False, bool, 'expert', _('Fix horrible')).setLabel(_("Combine everything (Type-B)"), _("This expert option adds all parts of the model together. The result is usually that internal cavities disappear. Depending on the model this can be intended or not. Enabling this option is at your own risk. Type-A is dependent on the model normals and tries to keep some internal holes intact. Type-B ignores all internal holes and only keeps the outside shape per layer."))
setting('fix_horrible_use_open_bits', False, bool, 'expert', _('Fix horrible')).setLabel(_("Keep open faces"), _("This expert option keeps all the open bits of the model intact. Normally Cura tries to stitch up small holes and remove everything with big holes, but this option keeps bits that are not properly part of anything and just goes with whatever is left. This option is usually not what you want, but it might enable you to slice models otherwise failing to produce proper paths.\nAs with all \"Fix horrible\" options, results may vary and use at your own risk."))
setting('fix_horrible_extensive_stitching', False, bool, 'expert', _('Fix horrible')).setLabel(_("Extensive stitching"), _("Extensive stitching tries to fix up open holes in the model by closing the hole with touching polygons. This algorthm is quite expensive and could introduce a lot of processing time.\nAs with all \"Fix horrible\" options, results may vary and use at your own risk."))

setting('plugin_config', '', str, 'hidden', 'hidden')
setting('object_center_x', -1, float, 'hidden', 'hidden')
setting('object_center_y', -1, float, 'hidden', 'hidden')

setting('start.gcode', """;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 S{print_temperature} ;Uncomment to add your own temperature line
G21        ;metric values
G90        ;absolute positioning
M82        ;set extruder to absolute mode
M107       ;start with the fan off

G28 X0 Y0  ;move X/Y to min endstops
G28 Z0     ;move Z to min endstops

G1 Z15.0 F{travel_speed} ;move the platform down 15mm

G92 E0                  ;zero the extruded length
G1 F200 E3              ;extrude 3mm of feed stock
G92 E0                  ;zero the extruded length again
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...
""", str, 'alteration', 'alteration')
#######################################################################################
setting('end.gcode', """;End GCode
M104 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)

G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way

M84                         ;steppers off
G90                         ;absolute positioning
;{profile_string}
""", str, 'alteration', 'alteration')
#######################################################################################
setting('start2.gcode', """;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M104 S{print_temperature} ;Uncomment to add your own temperature line
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
G21        ;metric values
G90        ;absolute positioning
M107       ;start with the fan off

G28 X0 Y0  ;move X/Y to min endstops
G28 Z0     ;move Z to min endstops

G1 Z15.0 F{travel_speed} ;move the platform down 15mm

T1                      ;Switch to the 2nd extruder
G92 E0                  ;zero the extruded length
G1 F200 E10             ;extrude 10mm of feed stock
G92 E0                  ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}

T0                      ;Switch to the first extruder
G92 E0                  ;zero the extruded length
G1 F200 E10             ;extrude 10mm of feed stock
G92 E0                  ;zero the extruded length again
G1 Z5 F200
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...
""", str, 'alteration', 'alteration')
#######################################################################################
setting('end2.gcode', """;End GCode
M104 T0 S0                     ;extruder heater off
M104 T1 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)

G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way

M84                         ;steppers off
G90                         ;absolute positioning
;{profile_string}
""", str, 'alteration', 'alteration')

#######################################################################################
setting('support_start.gcode', '', str, 'alteration', 'alteration')
setting('support_end.gcode', '', str, 'alteration', 'alteration')
setting('cool_start.gcode', '', str, 'alteration', 'alteration')
setting('cool_end.gcode', '', str, 'alteration', 'alteration')
setting('replace.csv', '', str, 'alteration', 'alteration')
#######################################################################################
setting('preSwitchExtruder.gcode', """;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
""", str, 'alteration', 'alteration')
setting('postSwitchExtruder.gcode', """;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
""", str, 'alteration', 'alteration')

setting('startMode', 'Simple', ['Simple', 'Normal'], 'preference', 'hidden')
setting('simpleModeProfile', 'Normal', str, 'preference', 'hidden')
setting('simpleModeMaterial', 'Pla', str, 'preference', 'hidden')
setting('simpleModeMaterialLeft', 'Pla', str, 'preference', 'hidden')
setting('simpleModeMaterialRight', 'Pla', str, 'preference', 'hidden')
setting('simpleModeNozzle', '0.4', float, 'preference', 'hidden')
setting('simpleModeExtruder', 'T0', str, 'preference', 'hidden')
setting('simpleModePlatformAdhesion', '1', str, 'preference', 'hidden')
setting('oneAtATime', 'True', bool, 'preference', 'hidden')
setting('lastFile', os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'resources', 'example', 'BCN3DDraudi_support.stl')), str, 'preference', 'hidden')
setting('save_profile', 'False', bool, 'preference', 'hidden').setLabel(_("Save profile on slice"), _("When slicing save the profile as [stl_file]_profile.ini next to the model."))
setting('filament_cost_kg', '0', float, 'preference', 'hidden').setLabel(_("Cost (price/kg)"), _("Cost of your filament per kg, to estimate the cost of the final print."))
setting('filament_cost_meter', '0', float, 'preference', 'hidden').setLabel(_("Cost (price/m)"), _("Cost of your filament per meter, to estimate the cost of the final print."))
setting('auto_detect_sd', 'True', bool, 'preference', 'hidden').setLabel(_("Auto detect SD card drive"), _("Auto detect the SD card. You can disable this because on some systems external hard-drives or USB sticks are detected as SD card."))

def _getMyDocumentsFolder():
    if platform.system() == "Windows":
        path = os.path.expanduser('~/Documents')
    else:
        path = os.path.expanduser('~/')
    if not os.path.exists(path):
        path = ''
    try:
        path = unicode(path)
    except UnicodeDecodeError:
        path = ''
    return path

setting('sdcard_rootfolder', _getMyDocumentsFolder(), str, 'preference', 'hidden').setLabel(_("Base folder to replicate on SD card"), _("The specified folder will be used as a base path. Any gcode generated from object coming from within that folder will be automatically saved on the SD card at the same sub-folder. Any object coming from outside of this path will save the gcode on the root folder of the card."))
setting('check_for_updates', 'True', bool, 'preference', 'hidden').setLabel(_("Check for updates"), _("Check for newer versions of Cura on startup"))
setting('submit_slice_information', 'False', bool, 'preference', 'hidden').setLabel(_("Send usage statistics"), _("Submit anonymous usage information to improve future versions of Cura"))
setting('youmagine_token', '', str, 'preference', 'hidden')
setting('filament_physical_density', '1240', float, 'preference', 'hidden').setRange(500.0, 3000.0).setLabel(_("Density (kg/m3)"), _("Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print."))
setting('language', 'English', str, 'preference', 'hidden').setLabel(_('Language'), _('Change the language in which Cura runs. Switching language requires a restart of Cura'))
setting('active_machine', '0', int, 'preference', 'hidden')

setting('model_colour', '#118DCD', str, 'preference', 'hidden').setLabel(_('Model colour'), _('Display color for first extruder'))
setting('model_colour2', '#CB3030', str, 'preference', 'hidden').setLabel(_('Model colour (2)'), _('Display color for second extruder'))
setting('model_colour3', '#DDD93C', str, 'preference', 'hidden').setLabel(_('Model colour (3)'), _('Display color for third extruder'))
setting('model_colour4', '#4550D3', str, 'preference', 'hidden').setLabel(_('Model colour (4)'), _('Display color for forth extruder'))
setting('printing_window', 'Basic', ['Basic'], 'preference', 'hidden').setLabel(_('Printing window type'), _('Select the interface used for USB printing.'))

setting('window_maximized', 'True', bool, 'preference', 'hidden')
setting('window_pos_x', '-1', float, 'preference', 'hidden')
setting('window_pos_y', '-1', float, 'preference', 'hidden')
setting('window_width', '-1', float, 'preference', 'hidden')
setting('window_height', '-1', float, 'preference', 'hidden')
setting('window_normal_sash', '320', float, 'preference', 'hidden')
setting('last_run_version', '', str, 'preference', 'hidden')

setting('machine_name', '', str, 'machine', 'hidden')
setting('machine_type', 'unknown', str, 'machine', 'hidden') #Ultimaker, Ultimaker2, RepRap
setting('machine_width', '205', float, 'machine', 'hidden').setLabel(_("Maximum width (mm)"), _("Size of the machine in mm"))
setting('machine_depth', '205', float, 'machine', 'hidden').setLabel(_("Maximum depth (mm)"), _("Size of the machine in mm"))
setting('machine_height', '200', float, 'machine', 'hidden').setLabel(_("Maximum height (mm)"), _("Size of the machine in mm"))
setting('machine_center_is_zero', 'False', bool, 'machine', 'hidden').setLabel(_("Machine center 0,0"), _("Machines firmware defines the center of the bed as 0,0 instead of the front left corner."))
setting('machine_shape', 'Square', ['Square','Circular'], 'machine', 'hidden').setLabel(_("Build area shape"), _("The shape of machine build area."))
setting('ultimaker_extruder_upgrade', 'False', bool, 'machine', 'hidden')
setting('has_heated_bed', 'False', bool, 'machine', 'hidden').setLabel(_("Heated bed"), _("If you have an heated bed, this enabled heated bed settings (requires restart)"))
setting('gcode_flavor', 'RepRap (Marlin/Sprinter)', ['RepRap (Marlin/Sprinter)', 'RepRap (Volumetric)', 'UltiGCode', 'MakerBot', 'BFB', 'Mach3/LinuxCNC'], 'machine', 'hidden').setLabel(_("GCode Flavor"), _("Flavor of generated GCode.\nRepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\nUltiGCode is a variation of the RepRap GCode which puts more settings in the machine instead of the slicer.\nMakerBot GCode has a few changes in the way GCode is generated, but still requires MakerWare to generate to X3G.\nBFB style generates RPM based code.\nMach3 uses A,B,C instead of E for extruders."))
setting('extruder_amount', '1', ['1','2','3','4','5'], 'machine', 'hidden').setLabel(_("Extruder count"), _("Amount of extruders in your machine."))
setting('extruder_offset_x1', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your secondary extruder compared to the primary."))
setting('extruder_offset_y1', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your secondary extruder compared to the primary."))
setting('extruder_offset_x2', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your tertiary extruder compared to the primary."))
setting('extruder_offset_y2', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your tertiary extruder compared to the primary."))
setting('extruder_offset_x3', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your forth extruder compared to the primary."))
setting('extruder_offset_y3', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your forth extruder compared to the primary."))
setting('extruder_offset_x4', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your forth extruder compared to the primary."))
setting('extruder_offset_y4', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your forth extruder compared to the primary."))
setting('steps_per_e', '0', float, 'machine', 'hidden').setLabel(_("E-Steps per 1mm filament"), _("Amount of steps per mm filament extrusion. If set to 0 then this value is ignored and the value in your firmware is used."))
setting('serial_port', 'AUTO', str, 'machine', 'hidden').setLabel(_("Serial port"), _("Serial port to use for communication with the printer"))
setting('serial_port_auto', '', str, 'machine', 'hidden')
setting('serial_baud', 'AUTO', str, 'machine', 'hidden').setLabel(_("Baudrate"), _("Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600"))
setting('serial_baud_auto', '', int, 'machine', 'hidden')
setting('self_serial', '', str, 'machine', 'hidden')

setting('extruder_head_size_min_x', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards X min (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan is on the left side."))
setting('extruder_head_size_min_y', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards Y min (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan is on the left side."))
setting('extruder_head_size_max_x', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards X max (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan is on the left side."))
setting('extruder_head_size_max_y', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards Y max (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan is on the left side."))
setting('extruder_head_size_height', '0.0', float, 'machine', 'hidden').setLabel(_("Printer gantry height (mm)"), _("The height of the gantry holding up the printer head. If an object is higher then this then you cannot print multiple objects one for one. 60mm for an Ultimaker."))

setting('machine_acceleration', '3000.0', float, 'machine', 'hidden').setLabel(_("Acceleration"), _("."))
setting('machine_max_acceleration[0]', '9000.0', float, 'machine', 'hidden').setLabel(_("Max acceleration X"), _("."))
setting('machine_max_acceleration[1]', '9000.0', float, 'machine', 'hidden').setLabel(_("Max acceleration Y"), _("."))
setting('machine_max_acceleration[2]', '100.0', float, 'machine', 'hidden').setLabel(_("Max acceleration Z"), _("."))
setting('machine_max_acceleration[3]', '10000.0', float, 'machine', 'hidden').setLabel(_("Max acceleration E"), _("."))
setting('machine_max_xy_jerk', '20.0', float, 'machine', 'hidden').setLabel(_("XY \"Jerk\""), _("."))
setting('machine_max_z_jerk', '0.4', float, 'machine', 'hidden').setLabel(_("Z \"Jerk\""), _("."))
setting('machine_max_e_jerk', '5.0', float, 'machine', 'hidden').setLabel(_("E \"Jerk\""), _("."))

validators.warningAbove(settingsDictionary['filament_flow'], 150, _("More flow than 150% is rare and usually not recommended."))
validators.warningBelow(settingsDictionary['filament_flow'], 50, _("Less flow than 50% is rare and usually not recommended."))
validators.warningAbove(settingsDictionary['layer_height'], lambda : (float(getProfileSetting('nozzle_size')) * 80.0 / 100.0), _("Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended."))
validators.wallThicknessValidator(settingsDictionary['wall_thickness'])
validators.warningAbove(settingsDictionary['print_speed'], 150.0, _("It is highly unlikely that your machine can achieve a printing speed above 150mm/s"))
validators.printSpeedValidator(settingsDictionary['print_speed'])
validators.printSpeedValidator(settingsDictionary['bottom_layer_speed'])
validators.printSpeedValidator(settingsDictionary['infill_speed'])
validators.printSpeedValidator(settingsDictionary['solidarea_speed'])
validators.printSpeedValidator(settingsDictionary['inset0_speed'])
validators.printSpeedValidator(settingsDictionary['insetx_speed'])
validators.warningAbove(settingsDictionary['print_temperature'], 280.0, _("Temperatures above 260C could damage your machine, be careful!"))
validators.warningAbove(settingsDictionary['print_temperature2'], 280.0, _("Temperatures above 260C could damage your machine, be careful!"))
validators.warningAbove(settingsDictionary['print_temperature3'], 280.0, _("Temperatures above 260C could damage your machine, be careful!"))
validators.warningAbove(settingsDictionary['print_temperature4'], 280.0, _("Temperatures above 260C could damage your machine, be careful!"))
validators.warningAbove(settingsDictionary['print_temperature5'], 280.0, _("Temperatures above 260C could damage your machine, be careful!"))
validators.warningAbove(settingsDictionary['filament_diameter'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
validators.warningAbove(settingsDictionary['filament_diameter2'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
validators.warningAbove(settingsDictionary['filament_diameter3'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
validators.warningAbove(settingsDictionary['filament_diameter4'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
validators.warningAbove(settingsDictionary['filament_diameter5'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
validators.warningAbove(settingsDictionary['travel_speed'], 300.0, _("It is highly unlikely that your machine can achieve a travel speed above 300mm/s"))
validators.warningAbove(settingsDictionary['bottom_thickness'], lambda : (float(getProfileSetting('nozzle_size')) * 3.0 / 4.0), _("A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended."))

#Conditions for multiple extruders
settingsDictionary['print_temperature2'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
settingsDictionary['print_temperature3'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 2)
settingsDictionary['print_temperature4'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 3)
settingsDictionary['print_temperature5'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 4)
settingsDictionary['filament_diameter2'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
settingsDictionary['filament_diameter3'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 2)
settingsDictionary['filament_diameter4'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 3)
settingsDictionary['filament_diameter5'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 4)
settingsDictionary['support_dual_extrusion'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
settingsDictionary['retraction_dual_amount'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
settingsDictionary['wipe_tower'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
settingsDictionary['wipe_tower_volume'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
settingsDictionary['ooze_shield'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
#Heated bed
settingsDictionary['print_bed_temperature'].addCondition(lambda : getMachineSetting('has_heated_bed') == 'True')

#UltiGCode uses less settings, as these settings are located inside the machine instead of gcode.
settingsDictionary['print_temperature'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['print_temperature2'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['print_temperature3'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['print_temperature4'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['print_temperature5'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['filament_diameter'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['filament_diameter2'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['filament_diameter3'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['filament_diameter4'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['filament_diameter5'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['filament_flow'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['print_bed_temperature'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['retraction_speed'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['retraction_amount'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')
settingsDictionary['retraction_dual_amount'].addCondition(lambda : getMachineSetting('gcode_flavor') != 'UltiGCode')

#Remove fake defined _() because later the localization will define a global _()
del _

#########################################################
## Profile and preferences functions
#########################################################

def getSubCategoriesFor(category):
    done = {}
    ret = []
    for s in settingsList:
        if s.getCategory() == category and not s.getSubCategory() in done and s.checkConditions():
            done[s.getSubCategory()] = True
            ret.append(s.getSubCategory())
    return ret

def getSettingsForCategory(category, subCategory = None):
    ret = []
    for s in settingsList:
        if s.getCategory() == category and (subCategory is None or s.getSubCategory() == subCategory) and s.checkConditions():
            ret.append(s)
    return ret

## Profile functions
def getBasePath():
    """
    :return: The path in which the current configuration files are stored. This depends on the used OS.
    """
    if platform.system() == "Windows":
        basePath = os.path.normpath(os.path.expanduser('~/.cura/0.1.5'))
    elif platform.system() == "Darwin":
        basePath = os.path.expanduser('~/Library/Application Support/Cura/%s' % version.getVersion(False))
    else:
        basePath = os.path.expanduser('~/.cura/%s' % version.getVersion(False))
    if not os.path.isdir(basePath):
        try:
            os.makedirs(basePath)
        except:
            print "Failed to create directory: %s" % (basePath)
    return basePath

def getAlternativeBasePaths():
    """
    Search for alternative installations of Cura and their preference files. Used to load configuration from older versions of Cura.
    """
    paths = []
    try:
        basePath = os.path.normpath(os.path.join(getBasePath(), '..'))
        for subPath in os.listdir(basePath):
            path = os.path.join(basePath, subPath)
            if os.path.isdir(path) and os.path.isfile(os.path.join(path, 'preferences.ini')) and path != getBasePath():
                paths.append(path)
            path = os.path.join(basePath, subPath, 'Cura')
            if os.path.isdir(path) and os.path.isfile(os.path.join(path, 'preferences.ini')) and path != getBasePath():
                paths.append(path)
        paths.sort()

        if sys.platform.startswith('win'):
            extra_list = []
            #Check the old base path, which was in the application directory.
            basePath = "C:\\program files (x86)\\"
            for subPath in os.listdir(basePath):
                path = os.path.join(basePath, subPath)
                if os.path.isdir(path) and os.path.isfile(os.path.join(path, 'preferences.ini')):
                    extra_list.append(path)
                path = os.path.join(basePath, subPath, 'Cura')
                if os.path.isdir(path) and os.path.isfile(os.path.join(path, 'preferences.ini')):
                    extra_list.append(path)
            basePath = "C:\\program files\\"
            for subPath in os.listdir(basePath):
                path = os.path.join(basePath, subPath)
                if os.path.isdir(path) and os.path.isfile(os.path.join(path, 'preferences.ini')):
                    extra_list.append(path)
                path = os.path.join(basePath, subPath, 'Cura')
                if os.path.isdir(path) and os.path.isfile(os.path.join(path, 'preferences.ini')):
                    extra_list.append(path)
            extra_list.sort()
            paths = extra_list + paths
    except:
        import traceback
        print traceback.print_exc()

    return paths

def getDefaultProfilePath():
    """
    :return: The default path where the currently used profile is stored and loaded on open and close of Cura.
    """
    return os.path.join(getBasePath(), 'current_profile.ini')

def loadProfile(filename, allMachines = False):
    """
        Read a profile file as active profile settings.
    :param filename:    The ini filename to save the profile in.
    :param allMachines: When False only the current active profile is saved. If True all profiles for all machines are saved.
    """
    global settingsList
    profileParser = ConfigParser.ConfigParser()
    try:
        profileParser.read(filename)
    except ConfigParser.ParsingError:
        return
    if allMachines:
        n = 0
        while profileParser.has_section('profile_%d' % (n)):
            for set in settingsList:
                if set.isPreference():
                    continue
                section = 'profile_%d' % (n)
                if set.isAlteration():
                    section = 'alterations_%d' % (n)
                if profileParser.has_option(section, set.getName()):
                    set.setValue(unicode(profileParser.get(section, set.getName()), 'utf-8', 'replace'), n)
            n += 1
    else:
        for set in settingsList:
            if set.isPreference():
                continue
            section = 'profile'
            if set.isAlteration():
                section = 'alterations'
            if profileParser.has_option(section, set.getName()):
                set.setValue(unicode(profileParser.get(section, set.getName()), 'utf-8', 'replace'))
    #Upgrade setting from older ini file
    if getProfileSetting('retraction_combing') == '1':
        putProfileSetting('retraction_combing', 'All')

def saveProfile(filename, allMachines = False):
    """
        Save the current profile to an ini file.
    :param filename:    The ini filename to save the profile in.
    :param allMachines: When False only the current active profile is saved. If True all profiles for all machines are saved.
    """
    global settingsList
    profileParser = ConfigParser.ConfigParser()
    if allMachines:
        for set in settingsList:
            if set.isPreference() or set.isMachineSetting():
                continue
            for n in xrange(0, getMachineCount()):
                if set.isAlteration():
                    section = 'alterations_%d' % (n)
                else:
                    section = 'profile_%d' % (n)
                if not profileParser.has_section(section):
                    profileParser.add_section(section)
                profileParser.set(section, set.getName(), set.getValue(n).encode('utf-8'))
    else:
        profileParser.add_section('profile')
        profileParser.add_section('alterations')
        for set in settingsList:
            if set.isPreference() or set.isMachineSetting():
                continue
            if set.isAlteration():
                profileParser.set('alterations', set.getName(), set.getValue().encode('utf-8'))
            else:
                profileParser.set('profile', set.getName(), set.getValue().encode('utf-8'))

    try:
        profileParser.write(open(filename, 'w'))
    except:
        print "Failed to write profile file: %s" % (filename)

def saveProfileDifferenceFromDefault(filename):
    """
        Save the current profile to an ini file. Only save the profile settings that differ from the default settings.
    :param filename:    The ini filename to save the profile in.
    """
    global settingsList
    profileParser = ConfigParser.ConfigParser()
    profileParser.add_section('profile')
    for set in settingsList:
        if set.isPreference() or set.isMachineSetting() or set.isAlteration():
            continue
        if set.getDefault() == set.getValue():
            continue
        profileParser.set('profile', set.getName(), set.getValue().encode('utf-8'))
    try:
        profileParser.write(open(filename, 'w'))
    except:
        print "Failed to write profile file: %s" % (filename)

def resetProfile():
    """ Reset the profile for the current machine to default. """
    global settingsList
    for set in settingsList:
        if not set.isProfile():
            continue
        set.setValue(set.getDefault())

    if getMachineSetting('machine_type') == 'ultimaker':
        putProfileSetting('nozzle_size', '0.4')
        if getMachineSetting('ultimaker_extruder_upgrade') == 'True':
            putProfileSetting('retraction_enable', 'True')
    elif getMachineSetting('machine_type') == 'ultimaker_plus':
        putProfileSetting('nozzle_size', '0.4')
        putProfileSetting('retraction_enable', 'True')
    elif getMachineSetting('machine_type').startswith('ultimaker2'):
        putProfileSetting('nozzle_size', '0.4')
        putProfileSetting('retraction_enable', 'True')
    else:
        putProfileSetting('nozzle_size', '0.5')
        putProfileSetting('retraction_enable', 'True')

def setProfileFromString(options):
    """
    Parse an encoded string which has all the profile settings stored inside of it.
    Used in combination with getProfileString to ease sharing of profiles.
    """
    options = base64.b64decode(options)
    options = zlib.decompress(options)
    (profileOpts, alt) = options.split('\f', 1)
    global settingsDictionary
    for option in profileOpts.split('\b'):
        if len(option) > 0:
            (key, value) = option.split('=', 1)
            if key in settingsDictionary:
                if settingsDictionary[key].isProfile():
                    settingsDictionary[key].setValue(value)
    for option in alt.split('\b'):
        if len(option) > 0:
            (key, value) = option.split('=', 1)
            if key in settingsDictionary:
                if settingsDictionary[key].isAlteration():
                    settingsDictionary[key].setValue(value)

def getProfileString():
    """
    Get an encoded string which contains all profile settings.
    Used in combination with setProfileFromString to share settings in files, forums or other text based ways.
    """
    p = []
    alt = []
    global settingsList
    for set in settingsList:
        if set.isProfile():
            if set.getName() in tempOverride:
                p.append(set.getName() + "=" + tempOverride[set.getName()])
            else:
                p.append(set.getName() + "=" + set.getValue().encode('utf-8'))
        elif set.isAlteration():
            if set.getName() in tempOverride:
                alt.append(set.getName() + "=" + tempOverride[set.getName()])
            else:
                alt.append(set.getName() + "=" + set.getValue().encode('utf-8'))
    ret = '\b'.join(p) + '\f' + '\b'.join(alt)
    ret = base64.b64encode(zlib.compress(ret, 9))
    return ret

def insertNewlines(string, every=64): #This should be moved to a better place then profile.
    lines = []
    for i in xrange(0, len(string), every):
        lines.append(string[i:i+every])
    return '\n'.join(lines)

def getPreferencesString():
    """
    :return: An encoded string which contains all the current preferences.
    """
    p = []
    global settingsList
    for set in settingsList:
        if (set.isPreference() and set.getName() != 'lastFile' and set.getName() != 'youmagine_token') or set.isMachineSetting():
            p.append(set.getName() + "=" + set.getValue().encode('utf-8'))
    ret = '\b'.join(p)
    ret = base64.b64encode(zlib.compress(ret, 9))
    return ret


def getProfileSetting(name):
    """
        Get the value of an profile setting.
    :param name: Name of the setting to retrieve.
    :return:     Value of the current setting.
    """
    if name in tempOverride:
        return tempOverride[name]
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isProfile():
        return settingsDictionary[name].getValue()
    traceback.print_stack()
    sys.stderr.write('Error: "%s" not found in profile settings\n' % (name))
    return ''

def getProfileSettingFloat(name):
    try:
        setting = getProfileSetting(name).replace(',', '.')
        return float(eval(setting, {}, {}))
    except:
        return 0.0

def putProfileSetting(name, value):
    """ Store a certain value in a profile setting. """
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isProfile():
        settingsDictionary[name].setValue(value)

def isProfileSetting(name):
    """ Check if a certain key name is actually a profile value. """
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isProfile():
        return True
    return False

## Preferences functions
def getPreferencePath():
    """
    :return: The full path of the preference ini file.
    """
    return os.path.join(getBasePath(), 'preferences.ini')

def getPreferenceFloat(name):
    """
    Get the float value of a preference, returns 0.0 if the preference is not a invalid float
    """
    try:
        setting = getPreference(name).replace(',', '.')
        return float(eval(setting, {}, {}))
    except:
        return 0.0

def getPreferenceColour(name):
    """
    Get a preference setting value as a color array. The color is stored as #RRGGBB hex string in the setting.
    """
    colorString = getPreference(name)
    return [float(int(colorString[1:3], 16)) / 255, float(int(colorString[3:5], 16)) / 255, float(int(colorString[5:7], 16)) / 255, 1.0]

def loadPreferences(filename):
    """
    Read a configuration file as global config
    """
    global settingsList
    profileParser = ConfigParser.ConfigParser()
    try:
        profileParser.read(filename)
    except ConfigParser.ParsingError:
        return

    for set in settingsList:
        if set.isPreference():
            if profileParser.has_option('preference', set.getName()):
                set.setValue(unicode(profileParser.get('preference', set.getName()), 'utf-8', 'replace'))

    n = 0
    while profileParser.has_section('machine_%d' % (n)):
        for set in settingsList:
            if set.isMachineSetting():
                if profileParser.has_option('machine_%d' % (n), set.getName()):
                    set.setValue(unicode(profileParser.get('machine_%d' % (n), set.getName()), 'utf-8', 'replace'), n)
        n += 1

    setActiveMachine(int(getPreferenceFloat('active_machine')))

def loadMachineSettings(filename):
    global settingsList
    #Read a configuration file as global config
    profileParser = ConfigParser.ConfigParser()
    try:
        profileParser.read(filename)
    except ConfigParser.ParsingError:
        return

    for set in settingsList:
        if set.isMachineSetting():
            if profileParser.has_option('machine', set.getName()):
                set.setValue(unicode(profileParser.get('machine', set.getName()), 'utf-8', 'replace'))
    checkAndUpdateMachineName()

def savePreferences(filename):
    global settingsList
    #Save the current profile to an ini file
    parser = ConfigParser.ConfigParser()
    parser.add_section('preference')

    for set in settingsList:
        if set.isPreference():
            parser.set('preference', set.getName(), set.getValue().encode('utf-8'))

    n = 0
    while getMachineSetting('machine_name', n) != '':
        parser.add_section('machine_%d' % (n))
        for set in settingsList:
            if set.isMachineSetting():
                parser.set('machine_%d' % (n), set.getName(), set.getValue(n).encode('utf-8'))
        n += 1
    try:
        parser.write(open(filename, 'w'))
    except:
        print "Failed to write preferences file: %s" % (filename)

def getPreference(name):
    if name in tempOverride:
        return tempOverride[name]
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isPreference():
        return settingsDictionary[name].getValue()
    traceback.print_stack()
    sys.stderr.write('Error: "%s" not found in preferences\n' % (name))
    return ''

def putPreference(name, value):
    #Check if we have a configuration file loaded, else load the default.
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isPreference():
        settingsDictionary[name].setValue(value)
        savePreferences(getPreferencePath())
        return
    traceback.print_stack()
    sys.stderr.write('Error: "%s" not found in preferences\n' % (name))

def isPreference(name):
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isPreference():
        return True
    return False

def getMachineSettingFloat(name, index = None):
    try:
        setting = getMachineSetting(name, index).replace(',', '.')
        return float(eval(setting, {}, {}))
    except:
        return 0.0

def getMachineSetting(name, index = None):
    if name in tempOverride:
        return tempOverride[name]
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isMachineSetting():
        return settingsDictionary[name].getValue(index)
    traceback.print_stack()
    sys.stderr.write('Error: "%s" not found in machine settings\n' % (name))
    return ''

def putMachineSetting(name, value, index = None):
    #Check if we have a configuration file loaded, else load the default.
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isMachineSetting():
        settingsDictionary[name].setValue(value, index)
    savePreferences(getPreferencePath())

def isMachineSetting(name):
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isMachineSetting():
        return True
    return False

def checkAndUpdateMachineName():
    global _selectedMachineIndex
    name = getMachineSetting('machine_name')
    index = None
    if name == '':
        name = getMachineSetting('machine_type')
    for n in xrange(0, getMachineCount()):
        if n == _selectedMachineIndex:
            continue
        if index is None:
            if name == getMachineSetting('machine_name', n):
                index = 1
        else:
            if '%s (%d)' % (name, index) == getMachineSetting('machine_name', n):
                index += 1
    if index is not None:
        name = '%s (%d)' % (name, index)
    putMachineSetting('machine_name', name)
    putPreference('active_machine', _selectedMachineIndex)

def getMachineCount():
    n = 0
    while getMachineSetting('machine_name', n) != '':
        n += 1
    if n < 1:
        return 1
    return n

def setActiveMachine(index):
    global _selectedMachineIndex
    _selectedMachineIndex = index
    putPreference('active_machine', _selectedMachineIndex)

def removeMachine(index):
    global _selectedMachineIndex
    global settingsList
    if getMachineCount() < 2:
        return
    for n in xrange(index, getMachineCount()):
        for setting in settingsList:
            if setting.isMachineSetting():
                setting.setValue(setting.getValue(n+1), n)

    if _selectedMachineIndex >= index:
        setActiveMachine(getMachineCount() - 1)

## Temp overrides for multi-extruder slicing and the project planner.
tempOverride = {}
def setTempOverride(name, value):
    tempOverride[name] = unicode(value).encode("utf-8")
def clearTempOverride(name):
    del tempOverride[name]
def resetTempOverride():
    tempOverride.clear()

#########################################################
## Utility functions to calculate common profile values
#########################################################
def calculateEdgeWidth():
    wallThickness = getProfileSettingFloat('wall_thickness')
    nozzleSize = getProfileSettingFloat('nozzle_size')

    if getProfileSetting('spiralize') == 'True' or getProfileSetting('simple_mode') == 'True':
        return wallThickness

    if wallThickness < 0.01:
        return nozzleSize
    if wallThickness < nozzleSize:
        return wallThickness

    lineCount = int(wallThickness / (nozzleSize - 0.0001))
    if lineCount == 0:
        return nozzleSize
    lineWidth = wallThickness / lineCount
    lineWidthAlt = wallThickness / (lineCount + 1)
    if lineWidth > nozzleSize * 1.5:
        return lineWidthAlt
    return lineWidth

def calculateLineCount():
    wallThickness = getProfileSettingFloat('wall_thickness')
    nozzleSize = getProfileSettingFloat('nozzle_size')

    if wallThickness < 0.01:
        return 0
    if wallThickness < nozzleSize:
        return 1
    if getProfileSetting('spiralize') == 'True' or getProfileSetting('simple_mode') == 'True':
        return 1

    lineCount = int(wallThickness / (nozzleSize - 0.0001))
    if lineCount < 1:
        lineCount = 1
    lineWidth = wallThickness / lineCount
    lineWidthAlt = wallThickness / (lineCount + 1)
    if lineWidth > nozzleSize * 1.5:
        return lineCount + 1
    return lineCount

def calculateSolidLayerCount():
    layerHeight = getProfileSettingFloat('layer_height')
    solidThickness = getProfileSettingFloat('solid_layer_thickness')
    if layerHeight == 0.0:
        return 1
    return int(math.ceil((solidThickness - 0.0001) / layerHeight))

def calculateObjectSizeOffsets():
    size = 0.0

    if getProfileSetting('platform_adhesion') == 'Brim':
        size += getProfileSettingFloat('brim_line_count') * calculateEdgeWidth()
    elif getProfileSetting('platform_adhesion') == 'Raft':
        pass
    else:
        if getProfileSettingFloat('skirt_line_count') > 0:
            size += getProfileSettingFloat('skirt_line_count') * calculateEdgeWidth() + getProfileSettingFloat('skirt_gap')

    #if getProfileSetting('enable_raft') != 'False':
    #	size += profile.getProfileSettingFloat('raft_margin') * 2
    #if getProfileSetting('support') != 'None':
    #	extraSizeMin = extraSizeMin + numpy.array([3.0, 0, 0])
    #	extraSizeMax = extraSizeMax + numpy.array([3.0, 0, 0])
    return [size, size]

def getMachineCenterCoords():
    if getMachineSetting('machine_center_is_zero') == 'True':
        return [0.0, 0.0]
    return [getMachineSettingFloat('machine_width') / 2, getMachineSettingFloat('machine_depth') / 2]

#Returns a list of convex polygons, first polygon is the allowed area of the machine,
# the rest of the polygons are the dis-allowed areas of the machine.
def getMachineSizePolygons():
    size = numpy.array([getMachineSettingFloat('machine_width'), getMachineSettingFloat('machine_depth'), getMachineSettingFloat('machine_height')], numpy.float32)
    ret = []
    if getMachineSetting('machine_shape') == 'Circular':
        # Circle platform for delta printers...
        circle = []
        steps = 32
        for n in xrange(0, steps):
            circle.append([math.cos(float(n)/steps*2*math.pi) * size[0]/2, math.sin(float(n)/steps*2*math.pi) * size[1]/2])
        ret.append(numpy.array(circle, numpy.float32))
    else:
        ret.append(numpy.array([[-size[0]/2,-size[1]/2],[size[0]/2,-size[1]/2],[size[0]/2, size[1]/2], [-size[0]/2, size[1]/2]], numpy.float32))

    if getMachineSetting('machine_type').startswith('ultimaker2'):
        #UM2 no-go zones
        w = 25
        w2 = 5
        h = 8
        if getMachineSetting('machine_type') == 'ultimaker2go':
            w2 = 25
        ret.append(numpy.array([[-size[0]/2,-size[1]/2],[-size[0]/2+w+2,-size[1]/2], [-size[0]/2+w,-size[1]/2+h], [-size[0]/2,-size[1]/2+h]], numpy.float32))
        ret.append(numpy.array([[ size[0]/2-w2-2,-size[1]/2],[ size[0]/2,-size[1]/2], [ size[0]/2,-size[1]/2+h],[ size[0]/2-w2,-size[1]/2+h]], numpy.float32))
        ret.append(numpy.array([[-size[0]/2+w+2, size[1]/2],[-size[0]/2, size[1]/2], [-size[0]/2, size[1]/2-h],[-size[0]/2+w, size[1]/2-h]], numpy.float32))
        ret.append(numpy.array([[ size[0]/2, size[1]/2],[ size[0]/2-w2-2, size[1]/2], [ size[0]/2-w2, size[1]/2-h],[ size[0]/2, size[1]/2-h]], numpy.float32))
    return ret

#returns the number of extruders minimal used. Normally this returns 1, but with dual-extrusion support material it returns 2
def minimalExtruderCount():
    if int(getMachineSetting('extruder_amount')) < 2:
        return 1
    if getProfileSetting('support') == 'None':
        return 1
    if getProfileSetting('support_dual_extrusion') == 'Second extruder':
        return 2
    return 1

def getGCodeExtension():
    if getMachineSetting('gcode_flavor') == 'BFB':
        return '.bfb'
    if getMachineSetting('gcode_flavor') == 'Mach3/LinuxCNC':
        return '.ngc'
    return '.gcode'

#########################################################
## Alteration file functions
#########################################################
def replaceTagMatch(m):
    pre = m.group(1)
    tag = m.group(2)
    if tag == 'time':
        return pre + time.strftime('%H:%M:%S')
    if tag == 'date':
        return pre + time.strftime('%d-%m-%Y')
    if tag == 'day':
        return pre + ['Sun', 'Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat'][int(time.strftime('%w'))]
    if tag == 'print_time':
        return pre + '#P_TIME#'
    if tag == 'filament_amount':
        return pre + '#F_AMNT#'
    if tag == 'filament_weight':
        return pre + '#F_WGHT#'
    if tag == 'filament_cost':
        return pre + '#F_COST#'
    if tag == 'profile_string':
        return pre + 'CURA_PROFILE_STRING:%s' % (getProfileString())
    if pre == 'F' and tag == 'max_z_speed':
        f = getProfileSettingFloat('travel_speed') * 60
    if pre == 'F' and tag in ['print_speed', 'retraction_speed', 'travel_speed', 'bottom_layer_speed', 'cool_min_feedrate']:
        f = getProfileSettingFloat(tag) * 60
    elif isProfileSetting(tag):
        f = getProfileSettingFloat(tag)
    elif isPreference(tag):
        f = getProfileSettingFloat(tag)
    else:
        return '%s?%s?' % (pre, tag)
    if (f % 1) == 0:
        return pre + str(int(f))
    return pre + str(f)

### Get aleration raw contents. (Used internally in Cura)
def getAlterationFile(filename):
    if filename in tempOverride:
        return tempOverride[filename]
    global settingsDictionary
    if filename in settingsDictionary and settingsDictionary[filename].isAlteration():
        return settingsDictionary[filename].getValue()
    traceback.print_stack()
    sys.stderr.write('Error: "%s" not found in alteration settings\n' % (filename))
    return ''

def setAlterationFile(name, value):
    #Check if we have a configuration file loaded, else load the default.
    global settingsDictionary
    if name in settingsDictionary and settingsDictionary[name].isAlteration():
        settingsDictionary[name].setValue(value)
    saveProfile(getDefaultProfilePath(), True)

def isTagIn(tag, contents):
    contents = re.sub(';[^\n]*\n', '', contents)
    return tag in contents

### Get the alteration file for output. (Used by Skeinforge)
def getAlterationFileContents(filename, extruderCount = 1):
    prefix = ''
    postfix = ''
    alterationContents = getAlterationFile(filename)
    if getMachineSetting('gcode_flavor') == 'UltiGCode':
        if filename == 'end.gcode':
            return 'M25 ;Stop reading from this point on.\n;CURA_PROFILE_STRING:%s\n' % (getProfileString())
        if filename == 'start.gcode':
            if getPreference('startMode') == 'Simple' and getPreference('simpleModeMaterial') != '':
                wx.MessageBox(_("Here1"), _("Repository Information"), wx.OK)
                return ';MTYPE:%s\n' % (getPreference('simpleModeMaterial'))
        return ''
    if filename == 'start.gcode':
        wx.MessageBox(_("Here2"), _("Repository Information"), wx.OK)
        gcode_parameter_key = 'S'
        if getMachineSetting('gcode_flavor') == 'Mach3/LinuxCNC':
            gcode_parameter_key = 'P'
        if extruderCount > 1:
            alterationContents = getAlterationFile("start%d.gcode" % (extruderCount))
        #For the start code, hack the temperature and the steps per E value into it. So the temperature is reached before the start code extrusion.
        #We also set our steps per E here, if configured.
        eSteps = getMachineSettingFloat('steps_per_e')
        if eSteps > 0:
            prefix += 'M92 E%f\n' % (eSteps)
        temp = getProfileSettingFloat('print_temperature')
        bedTemp = 0
        if getMachineSetting('has_heated_bed') == 'True':
            bedTemp = getProfileSettingFloat('print_bed_temperature')

        if bedTemp > 0 and not isTagIn('{print_bed_temperature}', alterationContents):
            prefix += 'M140 %s%f\n' % (gcode_parameter_key, bedTemp)
        if temp > 0 and not isTagIn('{print_temperature}', alterationContents):
            if extruderCount > 1:
                for n in xrange(1, extruderCount):
                    t = temp
                    if n > 0 and getProfileSettingFloat('print_temperature%d' % (n+1)) > 0:
                        t = getProfileSettingFloat('print_temperature%d' % (n+1))
                    prefix += 'M104 T%d %s%f\n' % (n, gcode_parameter_key, t)
                for n in xrange(0, extruderCount):
                    t = temp
                    if n > 0 and getProfileSettingFloat('print_temperature%d' % (n+1)) > 0:
                        t = getProfileSettingFloat('print_temperature%d' % (n+1))
                    prefix += 'M109 T%d %s%f\n' % (n, gcode_parameter_key, t)
                prefix += 'T0\n'
            else:
                wx.MessageBox(_("Here3"), _("Repository Information"), wx.OK)
                if getPreference('simpleModeExtruder') == 'T0':
                    wx.MessageBox(_("Here4"), _("Repository Information"), wx.OK)
                    prefix += 'M109 T0 %s%f\n' % (gcode_parameter_key, temp)
                else:
                    prefix += 'M109 %s%f\n' % (gcode_parameter_key, temp)
    elif filename == 'end.gcode':
        if extruderCount > 1:
            alterationContents = getAlterationFile("end%d.gcode" % (extruderCount))
        #Append the profile string to the end of the GCode, so we can load it from the GCode file later.
        #postfix = ';CURA_PROFILE_STRING:%s\n' % (getProfileString())
    return unicode(prefix + re.sub("(.)\{([^\}]*)\}", replaceTagMatch, alterationContents).rstrip() + '\n' + postfix).strip().encode('utf-8') + '\n'