Loading files
"""A typed read of ``circuit.json`` — the shared substrate for every check.
Circuit JSON is a flat list of ~2300 dicts with cross-references by id. Every
check in this package needs the same handful of joins (component → pads,
port → net, trace → net, component → courtyard), so they live here once.
Two joins are worth explaining because they are not obvious from the file:
* **Nets.** ``source_net`` carries the name and the ``is_power`` / ``is_ground``
flags, but ports do not point at nets directly. Both carry
``subcircuit_connectivity_map_key``, and that key *is* the net identity —
every port sharing one is electrically the same node. Grouping by it
reconstructs the full netlist with real names, including the nets that have
no ``source_net`` element (the compiler leaves those unnamed).
* **Traces.** ``pcb_trace.connection_name`` is either a ``source_net_id`` or a
``source_trace_id``; the second form is resolved through the source trace's
connected ports. Falling back to ``connectsTo`` (pcb ports) covers the rest.
Nothing here raises on malformed input — a missing field yields ``None`` and
the caller decides. Checks report what they could not read as coverage.
"""
from __future__ import annotations
import json
import math
from dataclasses import dataclass, field
from pathlib import Path
from typing import Iterable, Sequence
Element = dict
# ---------------------------------------------------------------------------
# Geometry primitives.
# ---------------------------------------------------------------------------
@dataclass(frozen=True)
class Rect:
"""An axis-aligned box in board millimetres."""
x0: float
y0: float
x1: float
y1: float
@staticmethod
def from_center(cx: float, cy: float, width: float, height: float) -> "Rect":
return Rect(cx - width / 2, cy - height / 2, cx + width / 2, cy + height / 2)
@staticmethod
def bounding(points: Iterable[tuple[float, float]]) -> "Rect | None":
xs: list[float] = []
ys: list[float] = []
for x, y in points:
xs.append(x)
ys.append(y)
if not xs:
return None
return Rect(min(xs), min(ys), max(xs), max(ys))
@property
def width(self) -> float:
return self.x1 - self.x0
@property
def height(self) -> float:
return self.y1 - self.y0
@property
def center(self) -> tuple[float, float]:
return ((self.x0 + self.x1) / 2, (self.y0 + self.y1) / 2)
def inset_margin(self, outer: "Rect") -> float:
"""Smallest distance from this rect's edge to ``outer``'s edge.
Negative when this rect pokes outside."""
return min(
self.x0 - outer.x0,
self.y0 - outer.y0,
outer.x1 - self.x1,
outer.y1 - self.y1,
)
def gap_to(self, other: "Rect") -> float:
"""Edge-to-edge gap. 0 when touching, negative when overlapping (the
magnitude of the overlap along the *least* overlapping axis)."""
dx = max(self.x0 - other.x1, other.x0 - self.x1)
dy = max(self.y0 - other.y1, other.y0 - self.y1)
if dx >= 0 and dy >= 0:
return math.hypot(dx, dy)
if dx >= 0:
return dx
if dy >= 0:
return dy
return max(dx, dy) # both negative: least-overlapping axis
def as_poly(self) -> "Poly":
return Poly(
[(self.x0, self.y0), (self.x1, self.y0), (self.x1, self.y1), (self.x0, self.y1)]
)
@dataclass(frozen=True)
class Poly:
"""A closed polygon in board millimetres, used for courtyards.
Courtyards are frequently **rotated** — a WS2812 placed at 22.5 degrees has
a diamond courtyard whose axis-aligned bounding box is 40% larger than the
part. Testing collisions on bounding boxes invented nine "overlaps" on
``harness-puck`` that do not exist, which is exactly the kind of noise that
trains everyone to ignore a gate. So the real outline is kept and the
separation is computed with a separating-axis test.
The test runs on each polygon's **convex hull**. That is exact for the
convex quads footprints actually emit, and for a concave outline it can
only ever over-report proximity — never miss a real collision.
"""
#: The outline exactly as given. Kept raw because a solder-mask region is
#: not convex and its hull is not it: replacing a mask opening by its hull
#: hides the very gaps the sliver check exists to measure.
points: tuple[tuple[float, float], ...]
def __init__(self, points: Sequence[tuple[float, float]]):
cleaned: list[tuple[float, float]] = []
for p in points:
pt = (float(p[0]), float(p[1]))
if not cleaned or pt != cleaned[-1]:
cleaned.append(pt)
if len(cleaned) > 1 and cleaned[0] == cleaned[-1]:
cleaned.pop()
object.__setattr__(self, "points", tuple(cleaned))
@property
def hull(self) -> tuple[tuple[float, float], ...]:
return tuple(_convex_hull(list(self.points)))
@property
def bounds(self) -> Rect:
rect = Rect.bounding(self.points)
if rect is None:
raise ValueError("empty polygon")
return rect
def _axes(self, points: tuple[tuple[float, float], ...]) -> list[tuple[float, float]]:
axes: list[tuple[float, float]] = []
n = len(points)
for i in range(n):
x0, y0 = points[i]
x1, y1 = points[(i + 1) % n]
dx, dy = x1 - x0, y1 - y0
length = math.hypot(dx, dy)
if length < 1e-12:
continue
axes.append((-dy / length, dx / length))
return axes
def _project(
self, axis: tuple[float, float], points: tuple[tuple[float, float], ...]
) -> tuple[float, float]:
values = [axis[0] * x + axis[1] * y for x, y in points]
return min(values), max(values)
def min_distance_to(self, other: "Poly") -> float:
"""Exact edge-to-edge distance between two arbitrary polygons.
Unlike :meth:`gap_to` this makes no convexity assumption, so it is the
right tool for a solder-mask region — which is whatever shape KiCad
merged the openings into. Returns 0.0 when they touch or overlap.
"""
if not self.points or not other.points:
return 0.0
if self._intersects(other):
return 0.0
best = math.inf
for a0, a1 in self._edges():
for b0, b1 in other._edges():
best = min(best, _segment_distance(a0, a1, b0, b1))
if best == 0.0:
return 0.0
return best if best < math.inf else 0.0
def _edges(self):
n = len(self.points)
for i in range(n):
yield self.points[i], self.points[(i + 1) % n]
def _intersects(self, other: "Poly") -> bool:
if any(other.contains(x, y) for x, y in self.points):
return True
return any(self.contains(x, y) for x, y in other.points)
def gap_to(self, other: "Poly") -> float:
"""Separation between two convex polygons.
Positive: the largest gap found along any separating axis — the true
edge-to-edge distance for convex shapes that miss along an edge normal.
Negative: the smallest penetration depth, i.e. how far one would have
to move to stop overlapping.
"""
mine, theirs = self.hull, other.hull
if len(mine) < 2 or len(theirs) < 2:
return 0.0
best_gap = -math.inf
least_overlap = math.inf
for axis in self._axes(mine) + other._axes(theirs):
a0, a1 = self._project(axis, mine)
b0, b1 = other._project(axis, theirs)
gap = max(b0 - a1, a0 - b1)
if gap > 0:
best_gap = max(best_gap, gap)
else:
least_overlap = min(least_overlap, -gap)
if best_gap > -math.inf:
return best_gap
return -least_overlap if least_overlap < math.inf else 0.0
def contains(self, x: float, y: float) -> bool:
inside = False
n = len(self.points)
for i in range(n):
x0, y0 = self.points[i]
x1, y1 = self.points[(i + 1) % n]
if (y0 > y) != (y1 > y):
t = (y - y0) / (y1 - y0)
if x < x0 + t * (x1 - x0):
inside = not inside
return inside
def distance_to_point(self, x: float, y: float) -> float:
"""Distance from a point to the polygon boundary; negative inside."""
n = len(self.points)
best = math.inf
for i in range(n):
x0, y0 = self.points[i]
x1, y1 = self.points[(i + 1) % n]
dx, dy = x1 - x0, y1 - y0
length_sq = dx * dx + dy * dy
t = 0.0 if length_sq == 0 else max(
0.0, min(1.0, ((x - x0) * dx + (y - y0) * dy) / length_sq)
)
best = min(best, math.hypot(x - (x0 + t * dx), y - (y0 + t * dy)))
return -best if self.contains(x, y) else best
def _segment_distance(a0, a1, b0, b1) -> float:
"""Minimum distance between two line segments."""
def point_to_segment(px, py, x0, y0, x1, y1) -> float:
dx, dy = x1 - x0, y1 - y0
length_sq = dx * dx + dy * dy
t = 0.0 if length_sq == 0 else max(
0.0, min(1.0, ((px - x0) * dx + (py - y0) * dy) / length_sq)
)
return math.hypot(px - (x0 + t * dx), py - (y0 + t * dy))
(ax0, ay0), (ax1, ay1) = a0, a1
(bx0, by0), (bx1, by1) = b0, b1
# Proper crossing means zero distance.
d1 = (bx1 - bx0) * (ay0 - by0) - (by1 - by0) * (ax0 - bx0)
d2 = (bx1 - bx0) * (ay1 - by0) - (by1 - by0) * (ax1 - bx0)
d3 = (ax1 - ax0) * (by0 - ay0) - (ay1 - ay0) * (bx0 - ax0)
d4 = (ax1 - ax0) * (by1 - ay0) - (ay1 - ay0) * (bx1 - ax0)
if ((d1 > 0) != (d2 > 0)) and ((d3 > 0) != (d4 > 0)):
return 0.0
return min(
point_to_segment(ax0, ay0, bx0, by0, bx1, by1),
point_to_segment(ax1, ay1, bx0, by0, bx1, by1),
point_to_segment(bx0, by0, ax0, ay0, ax1, ay1),
point_to_segment(bx1, by1, ax0, ay0, ax1, ay1),
)
def _convex_hull(points: Sequence[tuple[float, float]]) -> list[tuple[float, float]]:
"""Monotone chain. Returns the input unchanged when it has under 3 points."""
pts = sorted(set(points))
if len(pts) < 3:
return list(pts)
def cross(o, a, b) -> float:
return (a[0] - o[0]) * (b[1] - o[1]) - (a[1] - o[1]) * (b[0] - o[0])
lower: list[tuple[float, float]] = []
for p in pts:
while len(lower) >= 2 and cross(lower[-2], lower[-1], p) <= 0:
lower.pop()
lower.append(p)
upper: list[tuple[float, float]] = []
for p in reversed(pts):
while len(upper) >= 2 and cross(upper[-2], upper[-1], p) <= 0:
upper.pop()
upper.append(p)
return lower[:-1] + upper[:-1]
# ---------------------------------------------------------------------------
# Board entities.
# ---------------------------------------------------------------------------
@dataclass
class Pad:
"""One copper landing: an SMT pad or a plated hole."""
id: str
component_id: str | None
port_id: str | None
layer: str
x: float
y: float
width: float
height: float
plated_hole: bool = False
hole_diameter: float | None = None
mask_required: bool = True
paste_required: bool = True
@property
def rect(self) -> Rect:
return Rect.from_center(self.x, self.y, self.width, self.height)
@dataclass
class Component:
"""A placed part: source identity joined to its PCB footprint."""
source_id: str
pcb_id: str | None
name: str
ftype: str | None
layer: str
center: tuple[float, float]
width: float
height: float
rotation: float = 0.0
do_not_place: bool = False
lcsc: str | None = None
resistance: float | None = None
capacitance: float | None = None
inductance: float | None = None
color: str | None = None
pads: list[Pad] = field(default_factory=list)
courtyard: Rect | None = None
#: The courtyard as the footprint actually declares it — one polygon per
#: ``pcb_courtyard_rect`` / ``pcb_courtyard_outline``. Kept separately from
#: :attr:`courtyard` (the bounding box of their union) because both a
#: multi-rect courtyard and a *rotated* one cover far less space than their
#: bbox, and testing collisions on the bbox invents overlaps that are not
#: there — measured: nine of them on ``harness-puck``.
courtyard_parts: list[Poly] = field(default_factory=list)
@property
def body(self) -> Rect:
"""The footprint bounding box the compiler reports (pads included)."""
return Rect.from_center(self.center[0], self.center[1], self.width, self.height)
@property
def keepout(self) -> Rect:
"""Courtyard when the footprint declares one, else the body box. The
courtyard is the assembly keep-out (IPC-7351); the body box is the
conservative stand-in when a footprint has none."""
return self.courtyard or self.body
@property
def keepout_parts(self) -> list[Poly]:
"""The keep-out as separate polygons — use this for collision tests."""
return self.courtyard_parts or [self.body.as_poly()]
def keepout_gap_to(self, other: "Component") -> float:
"""Smallest gap between any pair of the two parts' keep-out polygons."""
return min(
a.gap_to(b) for a in self.keepout_parts for b in other.keepout_parts
)
def pad_gap_to(self, other: "Component") -> float | None:
"""Smallest copper-to-copper gap between the two parts' pads."""
gaps = [a.rect.gap_to(b.rect) for a in self.pads for b in other.pads]
return min(gaps) if gaps else None
@property
def pad_bounds(self) -> Rect | None:
return Rect.bounding(
p
for pad in self.pads
for p in (
(pad.rect.x0, pad.rect.y0),
(pad.rect.x1, pad.rect.y1),
)
)
@property
def prefix(self) -> str:
return "".join(c for c in self.name if c.isalpha()).upper()
@dataclass
class Net:
"""An electrical node: every port sharing one connectivity key."""
key: str
name: str | None
is_power: bool = False
is_ground: bool = False
port_ids: list[str] = field(default_factory=list)
#: ``(component name, port name)`` for every member — the readable form.
pins: list[tuple[str, str]] = field(default_factory=list)
@property
def label(self) -> str:
return self.name or f"net:{self.key[-12:]}"
@dataclass
class TraceSegment:
x0: float
y0: float
x1: float
y1: float
width: float
layer: str | None
@property
def length(self) -> float:
return math.hypot(self.x1 - self.x0, self.y1 - self.y0)
@dataclass
class Trace:
id: str
net_key: str | None
net_name: str | None
segments: list[TraceSegment] = field(default_factory=list)
#: How many times this trace changes layer. Each one is copper running
#: through the board, not across it — see :meth:`copper_length`.
via_count: int = 0
@property
def length(self) -> float:
"""Planar length: what the trace covers looking down at the board.
This is the number the pair-skew and width checks want. It is **not**
the length the router budgets against — for that see
:meth:`copper_length`.
"""
return sum(s.length for s in self.segments)
def copper_length(self, board_thickness_mm: float | None) -> float:
"""Total copper the signal travels, vias included.
A via is not free: the signal drops through the full board thickness
and climbs back. Measured against tscircuit's own
``pcb_trace_too_long_warning`` on a 1.6mm board, planar + one thickness
per via reproduces its figure exactly (9.509mm planar + 2 vias =
12.709mm, matching to three decimals). Falls back to the planar length
when the board never declared a thickness, which *understates* — the
caller should say so rather than let it read as measured.
"""
if not board_thickness_mm or self.via_count <= 0:
return self.length
return self.length + self.via_count * board_thickness_mm
@property
def min_width(self) -> float | None:
widths = [s.width for s in self.segments if s.width > 0]
return min(widths) if widths else None
@dataclass
class Hole:
x: float
y: float
diameter: float
plated: bool
component_id: str | None = None
#: Overall drilled extent. Equal to ``diameter`` on a round hole; on a pill
#: (a USB-C receptacle's through-hole legs, for one) the long axis is
#: larger and the fab routes it as a slot.
width: float | None = None
height: float | None = None
@property
def size(self) -> tuple[float, float]:
return (self.width or self.diameter, self.height or self.diameter)
@property
def is_slot(self) -> bool:
w, h = self.size
return abs(w - h) > 1e-6
# ---------------------------------------------------------------------------
# The index.
# ---------------------------------------------------------------------------
_PASSIVE_VALUE_FIELDS = {
"resistance": "resistance",
"capacitance": "capacitance",
"inductance": "inductance",
}
class Board:
"""Everything a check needs from one ``circuit.json``, joined once."""
def __init__(self, elements: Sequence[Element]):
self.elements: list[Element] = [e for e in elements if isinstance(e, dict)]
self._by_type: dict[str, list[Element]] = {}
for e in self.elements:
self._by_type.setdefault(str(e.get("type")), []).append(e)
self.outline: Rect | None = None
self.thickness_mm: float | None = None
self.layers: int = 2
self.name: str | None = None
self._read_board()
self.components: list[Component] = []
self.by_name: dict[str, Component] = {}
self._read_components()
self.nets: list[Net] = []
self.net_by_key: dict[str, Net] = {}
self._port_net: dict[str, str] = {} # source_port_id -> net key
self._pcb_port_net: dict[str, str] = {} # pcb_port_id -> net key
self._read_nets()
self._pad_by_source_port: dict[str, Pad] = {}
self._read_port_pads()
self.traces: list[Trace] = []
self._read_traces()
self.vias: list[Hole] = []
self.holes: list[Hole] = []
self._read_holes()
# -- readers ----------------------------------------------------------
def of_type(self, type_name: str) -> list[Element]:
return self._by_type.get(type_name, [])
def _read_board(self) -> None:
board = next(iter(self.of_type("pcb_board")), None)
if board is None:
return
width = board.get("width")
height = board.get("height")
center = board.get("center") or {}
if isinstance(width, (int, float)) and isinstance(height, (int, float)):
self.outline = Rect.from_center(
float(center.get("x") or 0.0),
float(center.get("y") or 0.0),
float(width),
float(height),
)
thickness = board.get("thickness")
if isinstance(thickness, (int, float)):
self.thickness_mm = float(thickness)
num_layers = board.get("num_layers")
if isinstance(num_layers, int):
self.layers = num_layers
meta = next(iter(self.of_type("source_project_metadata")), None)
if isinstance(meta, dict):
name = meta.get("project_name") or meta.get("name")
if isinstance(name, str):
self.name = name
def _read_components(self) -> None:
sources = {
str(e.get("source_component_id")): e for e in self.of_type("source_component")
}
pcbs_by_source: dict[str, Element] = {}
for e in self.of_type("pcb_component"):
sid = str(e.get("source_component_id") or "")
if sid:
pcbs_by_source[sid] = e
courtyards: dict[str, Rect] = {}
courtyard_parts: dict[str, list[Poly]] = {}
for e in self.of_type("pcb_courtyard_rect"):
cid = str(e.get("pcb_component_id") or "")
center = e.get("center") or {}
w, h = e.get("width"), e.get("height")
if not cid or not isinstance(w, (int, float)) or not isinstance(h, (int, float)):
continue
rect = Rect.from_center(
float(center.get("x") or 0.0), float(center.get("y") or 0.0),
float(w), float(h),
)
courtyards[cid] = _union(courtyards.get(cid), rect)
courtyard_parts.setdefault(cid, []).append(rect.as_poly())
for e in self.of_type("pcb_courtyard_outline"):
cid = str(e.get("pcb_component_id") or "")
pts = [
(float(p["x"]), float(p["y"]))
for p in (e.get("outline") or [])
if isinstance(p, dict)
and isinstance(p.get("x"), (int, float))
and isinstance(p.get("y"), (int, float))
]
rect = Rect.bounding(pts)
if cid and rect is not None and len(pts) >= 3:
courtyards[cid] = _union(courtyards.get(cid), rect)
courtyard_parts.setdefault(cid, []).append(Poly(pts))
pads_by_component: dict[str, list[Pad]] = {}
for e in self.of_type("pcb_smtpad"):
cid = str(e.get("pcb_component_id") or "")
x, y = e.get("x"), e.get("y")
if not isinstance(x, (int, float)) or not isinstance(y, (int, float)):
continue
width = e.get("width")
height = e.get("height")
if not isinstance(width, (int, float)):
radius = e.get("radius")
width = height = float(radius) * 2 if isinstance(radius, (int, float)) else 0.0
if not isinstance(height, (int, float)):
height = width
pad = Pad(
id=str(e.get("pcb_smtpad_id") or ""),
component_id=cid or None,
port_id=str(e.get("pcb_port_id") or "") or None,
layer=str(e.get("layer") or "top"),
x=float(x),
y=float(y),
width=float(width),
height=float(height),
)
pads_by_component.setdefault(cid, []).append(pad)
for e in self.of_type("pcb_plated_hole"):
cid = str(e.get("pcb_component_id") or "")
x, y = e.get("x"), e.get("y")
if not isinstance(x, (int, float)) or not isinstance(y, (int, float)):
continue
outer_w = e.get("outer_width") or e.get("outer_diameter") or 0.0
outer_h = e.get("outer_height") or e.get("outer_diameter") or outer_w
hole = e.get("hole_diameter") or e.get("hole_width")
pad = Pad(
id=str(e.get("pcb_plated_hole_id") or ""),
component_id=cid or None,
port_id=str(e.get("pcb_port_id") or "") or None,
layer="top",
x=float(x),
y=float(y),
width=float(outer_w or 0.0),
height=float(outer_h or 0.0),
plated_hole=True,
hole_diameter=float(hole) if isinstance(hole, (int, float)) else None,
)
pads_by_component.setdefault(cid, []).append(pad)
for sid, source in sources.items():
pcb = pcbs_by_source.get(sid)
pcb_id = str(pcb.get("pcb_component_id")) if pcb else None
center = (pcb or {}).get("center") or {}
supplier = source.get("supplier_part_numbers") or {}
lcsc_list = supplier.get("jlcpcb") if isinstance(supplier, dict) else None
component = Component(
source_id=sid,
pcb_id=pcb_id,
name=str(source.get("name") or sid),
ftype=str(source.get("ftype")) if source.get("ftype") else None,
layer=str((pcb or {}).get("layer") or "top"),
center=(float(center.get("x") or 0.0), float(center.get("y") or 0.0)),
width=float((pcb or {}).get("width") or 0.0),
height=float((pcb or {}).get("height") or 0.0),
rotation=float((pcb or {}).get("rotation") or 0.0),
do_not_place=bool((pcb or {}).get("do_not_place")),
lcsc=str(lcsc_list[0]) if isinstance(lcsc_list, list) and lcsc_list else None,
color=str(source.get("color")) if source.get("color") else None,
pads=pads_by_component.get(pcb_id or "", []),
courtyard=courtyards.get(pcb_id or ""),
courtyard_parts=courtyard_parts.get(pcb_id or "", []),
)
for attr, key in _PASSIVE_VALUE_FIELDS.items():
value = source.get(key)
if isinstance(value, (int, float)):
setattr(component, attr, float(value))
self.components.append(component)
self.by_name[component.name] = component
def _read_nets(self) -> None:
named: dict[str, Element] = {}
for e in self.of_type("source_net"):
key = e.get("subcircuit_connectivity_map_key")
if isinstance(key, str):
named[key] = e
source_components = {
str(e.get("source_component_id")): str(e.get("name") or "")
for e in self.of_type("source_component")
}
groups: dict[str, Net] = {}
for port in self.of_type("source_port"):
key = port.get("subcircuit_connectivity_map_key")
if not isinstance(key, str):
continue
net = groups.get(key)
if net is None:
meta = named.get(key)
net = Net(
key=key,
name=str(meta.get("name")) if meta and meta.get("name") else None,
is_power=bool(meta.get("is_power")) if meta else False,
is_ground=bool(meta.get("is_ground")) if meta else False,
)
groups[key] = net
port_id = str(port.get("source_port_id") or "")
net.port_ids.append(port_id)
self._port_net[port_id] = key
component = source_components.get(str(port.get("source_component_id") or ""), "?")
net.pins.append((component, str(port.get("name") or port.get("pin_number") or "?")))
# Nets declared but with no port on them still matter (a dangling rail).
for key, meta in named.items():
if key not in groups:
groups[key] = Net(
key=key,
name=str(meta.get("name")) if meta.get("name") else None,
is_power=bool(meta.get("is_power")),
is_ground=bool(meta.get("is_ground")),
)
self.nets = list(groups.values())
self.net_by_key = groups
for pcb_port in self.of_type("pcb_port"):
source_port_id = str(pcb_port.get("source_port_id") or "")
key = self._port_net.get(source_port_id)
if key:
self._pcb_port_net[str(pcb_port.get("pcb_port_id") or "")] = key
def _read_port_pads(self) -> None:
"""``source_port_id -> Pad``, the copper a schematic pin actually lands
on. Two hops: ``pcb_port`` carries the source id, and a pad carries the
pcb port id. Geometry checks that must work *before* routing need this
— pads exist whether or not a trace was ever laid."""
pcb_to_source = {
str(e.get("pcb_port_id") or ""): str(e.get("source_port_id") or "")
for e in self.of_type("pcb_port")
}
for component in self.components:
for pad in component.pads:
source_port = pcb_to_source.get(pad.port_id or "")
if source_port:
self._pad_by_source_port[source_port] = pad
def _read_traces(self) -> None:
source_nets = {
str(e.get("source_net_id")): e.get("subcircuit_connectivity_map_key")
for e in self.of_type("source_net")
}
source_traces = {
str(e.get("source_trace_id")): e for e in self.of_type("source_trace")
}
for e in self.of_type("pcb_trace"):
key: str | None = None
connection = str(e.get("connection_name") or "")
if connection in source_nets and isinstance(source_nets[connection], str):
key = str(source_nets[connection])
elif connection in source_traces:
st = source_traces[connection]
candidate = st.get("subcircuit_connectivity_map_key")
if isinstance(candidate, str):
key = candidate
else:
for pid in st.get("connected_source_port_ids") or []:
if str(pid) in self._port_net:
key = self._port_net[str(pid)]
break
if key is None:
for pid in e.get("connectsTo") or []:
hit = self._pcb_port_net.get(str(pid))
if hit:
key = hit
break
segments: list[TraceSegment] = []
route = [
p
for p in (e.get("route") or [])
if isinstance(p, dict)
and isinstance(p.get("x"), (int, float))
and isinstance(p.get("y"), (int, float))
]
for first, second in zip(route, route[1:]):
width = first.get("width")
segments.append(
TraceSegment(
x0=float(first["x"]),
y0=float(first["y"]),
x1=float(second["x"]),
y1=float(second["y"]),
width=float(width) if isinstance(width, (int, float)) else 0.0,
layer=str(first.get("layer")) if first.get("layer") else None,
)
)
net = self.net_by_key.get(key) if key else None
self.traces.append(
Trace(
id=str(e.get("pcb_trace_id") or ""),
net_key=key,
net_name=net.label if net else None,
segments=segments,
via_count=sum(
1
for p in (e.get("route") or [])
if isinstance(p, dict) and p.get("route_type") == "via"
),
)
)
def _read_holes(self) -> None:
for e in self.of_type("pcb_via"):
x, y = e.get("x"), e.get("y")
d = e.get("hole_diameter")
if all(isinstance(v, (int, float)) for v in (x, y, d)):
self.vias.append(Hole(float(x), float(y), float(d), plated=True))
for type_name, plated in (("pcb_hole", False), ("pcb_plated_hole", True)):
for e in self.of_type(type_name):
x, y = e.get("x"), e.get("y")
hole_w = e.get("hole_width")
hole_h = e.get("hole_height")
d = e.get("hole_diameter")
if not isinstance(d, (int, float)):
d = hole_w if isinstance(hole_w, (int, float)) else None
if not all(isinstance(v, (int, float)) for v in (x, y, d)):
continue
width = float(hole_w) if isinstance(hole_w, (int, float)) else float(d)
height = float(hole_h) if isinstance(hole_h, (int, float)) else float(d)
self.holes.append(
Hole(
float(x),
float(y),
# The drill tool is the *narrow* axis of a slot.
min(float(d), width, height),
plated=plated,
component_id=str(e.get("pcb_component_id") or "") or None,
width=width,
height=height,
)
)
# -- queries ----------------------------------------------------------
def net_of_port(self, source_port_id: str) -> Net | None:
key = self._port_net.get(source_port_id)
return self.net_by_key.get(key) if key else None
def pad_of_source_port(self, source_port_id: str) -> Pad | None:
"""The copper a schematic pin lands on, or ``None`` when the pin was
never placed (a do-not-place part, or a footprint short of pads)."""
return self._pad_by_source_port.get(source_port_id)
def net_named(self, name: str) -> Net | None:
for net in self.nets:
if net.name == name:
return net
return None
def traces_on(self, net: Net) -> list[Trace]:
return [t for t in self.traces if t.net_key == net.key]
def placed(self) -> list[Component]:
"""Components the assembler will actually pick and place."""
return [
c
for c in self.components
if not c.do_not_place and c.pads and c.width > 0 and c.height > 0
]
@property
def ground(self) -> Net | None:
return next((n for n in self.nets if n.is_ground), None)
@property
def power_nets(self) -> list[Net]:
return [n for n in self.nets if n.is_power]
def _union(a: Rect | None, b: Rect) -> Rect:
if a is None:
return b
return Rect(min(a.x0, b.x0), min(a.y0, b.y0), max(a.x1, b.x1), max(a.y1, b.y1))
def load(path: str | Path) -> Board:
"""Read a ``circuit.json`` from disk into a :class:`Board`."""
data = json.loads(Path(path).read_text(encoding="utf-8"))
if not isinstance(data, list):
raise ValueError(f"{path} is not a circuit-json array")
return Board(data)
e4d010b16This file is pinned to the selected release. Download the original to open it in your design tool.