KiCad Project for an AS5047P Breakout Board
Loading README and project media…
Big thanks to PCBWay for sponsoring this project! Their support enables me (and hundreds of other designers) to make cool stuff. More info in Manufacturing
It's also designed to mount easily with generic 360kv 5010 brushless motors like these. The mounting hole placement is sketched in an image below. There are two sets of holes, the wider set are 19mm apart and the closer set are 16mm apart.
This board exposes all possible communication interfaces with the IC:
Although it should be noted that some of these modes may require additional configuration over SPI to work (I believe the UVW mode needs to know the number of poles on the motor to function properly). Refer to the datasheet for more information.
This board allows for either 3.3 or 5 volt operation through a solder jumper on the back side, and all of the connectors are JST GH (kits for these are easily available on amazon).
All of the files needed to manufacture these boards are provided in the fabrication folder.
The process is super easy if you use PCBWay:
gerber.zip file to their instant quote tool
HASL lead free option rather than the default leaded oneAssembly Service box. The default options are fine here, make sure to set the quantity of boards you want assembled.Save to Cart button on the right hand side of the screen.Add File button and upload the Bom.csv and Centroid.csv filesPCBWay's amazing customer service team will email you with updates and to check things like component placement throughout the process. But, these boards are fairly simple and there should be no issues here. You can also check the exact status of your order at any time on the website.
✅ Results
I am certainly biased, but I've found that PCBWay is easily the best way to get PCBs made. The quality of the silkscreen and accuracy of component placement are great. And, the constant updates & communications from the PCBWay team give me great confidence that my projects will succeed on the first try.
I highly recommend their services. And, by supporting them, you support small projects and independent designers like myself!
When it's all said and done, these cost me about $10 per board with shipping and tariffs included (I live in the US). If you choose the cheaper shipping option and don't have to deal with crazy tariffs, then these could get down closer to $7 per board, which is a fantastic deal. Especially considering that similar encoders like the AS5048A on amazon cost closer to $14 per board (at least at the time of writing).
If you find a mistake, or want to make an improvement, feel free to open a pr!
Mounting hole spacing, the holes are M3.