Arisu Keyboard Case

アリス Arylic Case design formatted ready for Ponoko with the kerf of the switch cutout set to 0.15mm.
Disclaimer: Use these files at your own risk.

Case Pieces

• Low Profile Case (arisu_lopro_case_P2_ponoko.eps)
• High Profile Layer (Optional) (arisu_hipro_layer_P2_ponoko.eps)

Fabrication

• Upload the .eps file to Ponoko and select P2 size 3mm acrylic with the color of your choice.

Assembly

For Low Profile

Material	Quantity
M2.5 * 12mm	4
M2.5 * 5mm	12
M2.5 HARWIN R25-1000602 standoff	8

For High Profile

Material	Quantity
M2.5 * 12mm	12
M2.5 * 5mm	4
M2.5 HARWIN R25-1000602 standoff	8

This design uses M2.5 screws and standoffs. Feel free to modify the screw and standoff hole design accommodate your needs.
The case will sit at an angle with the center portion protruding out so test the placement of your rubber bumpons before sticking them.