Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
507b89ebdThis file is pinned to the selected release. Download the original to open it in your design tool.
#ifndef RESET_COMPILED
#define RESET_COMPILED
;###############################################################################
;# AriCalculator - Bootloader - Reset Handler #
;###############################################################################
;# Copyright 2010-2018 Dirk Heisswolf #
;# This file is part of the S12CBase framework for NXP's S12C MCU family. #
;# #
;# S12CBase is free software: you can redistribute it and/or modify #
;# it under the terms of the GNU General Public License as published by #
;# the Free Software Foundation, either version 3 of the License, or #
;# (at your option) any later version. #
;# #
;# S12CBase is distributed in the hope that it will be useful, #
;# but WITHOUT ANY WARRANTY; without even the implied warranty of #
;# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
;# GNU General Public License for more details. #
;# #
;# You should have received a copy of the GNU General Public License #
;# along with S12CBase. If not, see <http://www.gnu.org/licenses/>. #
;###############################################################################
;# Description: #
;# This part of the AriCalculator's bootloader is active after reset. It #
;# invokes the bootloader codei if the keys ENTER and DEL are pushed, #
;# coming out of power-on reset. Otherwise the regular firmware will be #
;# started. #
;# #
;###############################################################################
;# Version History: #
;# July 10, 2017 #
;# - Initial release #
;# #
;###############################################################################
;###############################################################################
;# Configuration #
;###############################################################################
;###############################################################################
;# Constants #
;###############################################################################
;###############################################################################
;# Variables #
;###############################################################################
#ifdef RESET_VARS_START_LIN
ORG RESET_VARS_START, RESET_VARS_START_LIN
#else
ORG RESET_VARS_START
RESET_VARS_START_LIN EQU @
#endif
RESET_VARS_END EQU *
RESET_VARS_END_LIN EQU @
;###############################################################################
;# Macros #
;###############################################################################
;#Initialization
#macro RESET_INIT, 0
#ifdef FLASH_COMPILE
;Check for POR
BRSET CPMUFLG, #PORF, CHECK_KEYPAD ;check for POR
;Start firmware
START_FIRMWARE CLR ATDDIENL ;restore reset state
CLR PER1AD ;restore reset state
CLR DDRP ;restore reset state
CLR PTP ;restore reset state
MOVB #(($FF00-BOOTLOADER_SIZE)>>8), IVBR ;set vector base
JMP [$FFFE-BOOTLOADER_SIZE] ;jump to firmware
#else
START_FIRMWARE EQU START_OF_CODE ;loop until key combination is pushed
#endif
;Setup keypad
CHECK_KEYPAD MOVB #$FF, ATDDIENL ;enable PAD's input buffers
MOVB #$FF, PER1AD ;enable PAD's pull-ups
MOVB #$3F, DDRP ;drive keyboard columns low
;Check key pad
; P P P P P P
; P P P P P P
; 0 1 2 3 4 5
; | | | | | |
; PAD6 ---29-28-27-26-25-24 |G
; | | | | | | |
; PAD5 ---23-22-21-20-1F-1E |F
; | | | | | | |
; PAD4 ---1D-1C-1B-1A-19-18 |E
; | | | | | |
; PAD3 ------16-15-14-13-12 |D
; | | | | | |
; PAD2 ------10--F--E--D--C |C
; | | | | | |
; PAD1 -------A--9--8--7--6 |B
; | | | | | |
; PAD0 -------4--3--2--1--0 |A
; ________________
; 5 4 3 2 1 0
MOVB #$FD, PTP ;check row 4
NOP ;wait
LDAA PT1AD ;row pattern -> A
MOVB #$EF, PTP ;check row 1
CMPA #$FB ;check for ENTER key
BNE START_FIRMWARE ;start regular firmware
LDAA PT1AD ;row pattern -> A
MOVB #$DF, PTP ;check row 0
CMPA #$FE ;check for DEL key
BNE START_FIRMWARE ;start regular firmware
LDAA PT1AD ;row pattern -> A
MOVB #$F7, PTP ;check row 2
COMA ;check for no key
BNE START_FIRMWARE ;start regular firmware
LDAA PT1AD ;row pattern -> A
MOVB #$FB, PTP ;check row 3
COMA ;check for no key
BNE START_FIRMWARE ;start regular firmware
LDAA PT1AD ;row pattern -> A
MOVB #$FE, PTP ;check row 5
COMA ;check for no key
BNE START_FIRMWARE ;start regular firmware
LDAA PT1AD ;row pattern -> A
MOVB #$FF, PTP ;unselect keypad columns
COMA ;check for no key
BNE START_FIRMWARE ;start regular firmware
#emac
;###############################################################################
;# Code #
;###############################################################################
#ifdef RESET_CODE_START_LIN
ORG RESET_CODE_START, RESET_CODE_START_LIN
#else
ORG RESET_CODE_START
RESET_CODE_START_LIN EQU @
#endif
;# Entry point for COP reset
;#==========================
RESET_COP_ENTRY EQU *
//Run firmware's COP reset handler
MOVB #(($FF00-BOOTLOADER_SIZE)>>8), IVBR
JMP [$FFFA-BOOTLOADER_SIZE]
;# Entry point for CM reset
;#=========================
RESET_CM_ENTRY EQU *
//Run firmware's COP reset handler
MOVB #(($FF00-BOOTLOADER_SIZE)>>8), IVBR
JMP [$FFFC-BOOTLOADER_SIZE]
;# Entry point for common resets
;#==============================
RESET_EXT_ENTRY EQU START_OF_CODE
RESET_CODE_END EQU *
RESET_CODE_END_LIN EQU @
;###############################################################################
;# Tables #
;###############################################################################
#ifdef RESET_TABS_START_LIN
ORG RESET_TABS_START, RESET_TABS_START_LIN
#else
ORG RESET_TABS_START
RESET_TABS_START_LIN EQU @
#endif
RESET_TABS_END EQU *
RESET_TABS_END_LIN EQU @
#endif