Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
ae6c31e73This file is pinned to the selected release. Download the original to open it in your design tool.
# Character
# (also available as CLI option)
character: 好
# Scale of the part (max size = scale * 60x60mm)
# (also available as CLI option)
scale: 1
# Parts to generate, necessary when generating strokes / plate,pillars separately
# (also available as CLI option)
parts: ["strokes", "plate", "pillars", "connectors", "debug"]
# Draw connectors between the tail of a stroke and the head of the next stroke
enable_connectors: false
# Draw a pillar underneath each stroke and make an insert on the underside of each stroke
enable_pillars: false
# Draw a round plate underneath the structure
enable_plate: false
# Space the heads of each stroke evenly
flat_mode: true
# Extrude the strokes to the plate
to_bottom_mode: false
# Calculate average tilt and undo it
untilted_mode: false
general_options:
# How many parts to divide a stroke unit in
parts_per_stroke_unit: 80
# When not in flat mode, Z distance between head and tail of strokes
distance_between_strokes: 0
# Extrusion height of each stroke
thickness: 90
# Slope of each stroke
stretch: 160
# XY-centering: 'box' takes the center from the character data
# 'average_medians' recalculates the center
centering_method: "box"
# Smoothen the curve to improve splitting into parts
smoothen_curve: true
# How much to smoothen the curve
smoothen_curve_amount: 1
# Smoothen the surface by averaging the shear
smoothen_surface: true
# How much to remember the shears of previous parts and average
smoothen_surface_amount: 1
# Ensure overlap between parts for 3d model
part_offset: 1
# Add extra width (a stroke) to the stroke
stroke_extra_width: 0
untilted_options:
# For untilting, bottom detection is not perfect yet, so adjust the margin here
bottom_margin: 70
# Draw original and untilted axes
debug_axis: false
connector_options:
# Force the connectors to be parallel to the XY plane
force_horizontal: false
# Diameter of each connector
thickness: 20
# Distance to the head/tail of the stroke relative to the stroke length
end_distance: 0.1
# Circular segments for the connector, 4 for a square connector
n_segments: 20
flat_mode_options:
# In flat mode, space between head of stroke and head of next stroke
spacing: 5
plate_options:
# Height of the plate
height: 50
# Z-distance lowest stroke can be sunk in the plate
overlap: 0
pillar_options:
# Diameter of each pillar
thickness: 20
# Margin between insert on pillar and insert in stroke (for 3D printing)
insert_margin: 3
# Circular segments of an insert, 4 for square, 6 for hexagon
insert_n_segments: 4
# Angle at which the pillar insert intersects the stroke
insert_angle: 45
# Ratio of insert size to pillar thickness
insert_multiplier: 1.2 # sqrt(2)
# Distance to the head/tail of the stroke relative to the stroke length
pillar_end_distance: 0.5
# How much the pillar will be in the plate (default: half)
plate_insertion: 0.5
debug_options:
enable_plot: false
show_plot: true
plot_window_zoom: 1
# Debug voronoi and strokes using matplotlib
plot_voronoi: false
plot_medians: false
plot_stroke: false
plot_orig_medians: false
plot_zoom: 1
per_stroke_options: {}