// Copyright 2021 DeepMind Technologies Limited
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "engine/engine_sensor.h"

#include <stddef.h>
#include <string.h>

#include <mujoco/mjdata.h>
#include <mujoco/mjmodel.h>
#include <mujoco/mjplugin.h>
#include <mujoco/mjsan.h>  // IWYU pragma: keep
#include "engine/engine_callback.h"
#include "engine/engine_collision_sdf.h"
#include "engine/engine_core_smooth.h"
#include "engine/engine_core_util.h"
#include "engine/engine_crossplatform.h"
#include "engine/engine_memory.h"
#include "engine/engine_plugin.h"
#include "engine/engine_ray.h"
#include "engine/engine_sleep.h"
#include "engine/engine_sort.h"
#include "engine/engine_support.h"
#include "engine/engine_util_blas.h"
#include "engine/engine_util_errmem.h"
#include "engine/engine_util_misc.h"
#include "engine/engine_util_spatial.h"
#include "engine/engine_thread.h"



//-------------------------------- utility ---------------------------------------------------------


typedef struct {
  mjtNum criterion;  // criterion for partial sort
  int id;            // index in d->contact
  int flip;          // 0: don't flip the normal, 1: flip the normal
} ContactInfo;

// define ContactSelect: find the k smallest elements of a ContactInfo array
static int ContactInfoCompare(const ContactInfo* a, const ContactInfo* b, void* context) {
  if (a->criterion < b->criterion) return -1;
  if (a->criterion > b->criterion) return 1;

  if (a->id < b->id) return -1;
  if (a->id > b->id) return 1;

  return 0;
}
mjPARTIAL_SORT(ContactSelect, ContactInfo, ContactInfoCompare);


// arguments for parallel tactile sensor computation
typedef struct mjTactileTaskArgs_ {
  int sensor_id;
  int mesh_id;
  int geom_id;
  int parent_weld;
  int ncontact;
  int nchannel;
  int* contact_geom_ids;
  int start_taxel;
  int end_taxel;
  mjtNum* sensordata;
} mjTactileTaskArgs;


// worker function for parallel tactile computation over taxel batches
static void* tactile_taxel_batch(const mjModel* m, mjData* d, void* args) {
  mjTactileTaskArgs* t = (mjTactileTaskArgs*)args;
  int mesh_id = t->mesh_id;
  int geom_id = t->geom_id;
  int parent_weld = t->parent_weld;
  int ncon = m->mesh_vertnum[mesh_id];

  mjtNum* geom_pos = d->geom_xpos + 3*geom_id;
  mjtNum* geom_mat = d->geom_xmat + 9*geom_id;
  float* mesh_vert = m->mesh_vert + 3*m->mesh_vertadr[mesh_id];
  float* mesh_normal = m->mesh_normal + 3*m->mesh_normaladr[mesh_id];

  int has_frame = (m->mesh_normalnum[mesh_id] == 3 * m->mesh_vertnum[mesh_id]);
  int normal_stride = has_frame ? 9 : 3;

  // process taxels in [start_taxel, end_taxel)
  for (int j = t->start_taxel; j < t->end_taxel; j++) {
    mjtNum pos[3] = {mesh_vert[3*j + 0], mesh_vert[3*j + 1], mesh_vert[3*j + 2]};

    mjtNum xpos[3];
    mju_mulMatVec3(xpos, geom_mat, pos);
    mju_addTo3(xpos, geom_pos);

    // iterate over colliding geoms
    for (int g = 0; g < t->ncontact; g++) {
      int geom = t->contact_geom_ids[g];
      if (geom == geom_id) {
        continue;
      }
      int body = m->geom_bodyid[geom];

      // set up SDF for this contact geom
      int sdf_instance[2] = {-1, -1};
      mjtGeom geomtype[2] = {mjGEOM_SDF, mjGEOM_SPHERE};
      const mjpPlugin* sdf_ptr[2] = {NULL, NULL};
      if (m->geom_type[geom] == mjGEOM_SDF) {
        sdf_instance[0] = m->geom_plugin[geom];
        sdf_ptr[0] = mjc_getSDF(m, geom);
      } else if (m->geom_type[geom] == mjGEOM_MESH) {
        sdf_instance[0] = m->geom_dataid[geom];
        geomtype[0] = (mjtGeom)m->geom_type[geom];
      } else {
        sdf_instance[0] = geom;
        geomtype[0] = (mjtGeom)m->geom_type[geom];
      }

      // skip mesh geoms not having an octree
      if (geomtype[0] == mjGEOM_MESH &&
          m->mesh_octadr[m->geom_dataid[geom]] == -1) {
        continue;
      }

      mjSDF geom_sdf;
      geom_sdf.id = &sdf_instance[0];
      geom_sdf.type = mjSDFTYPE_SINGLE;
      geom_sdf.plugin = &sdf_ptr[0];
      geom_sdf.geomtype = &geomtype[0];

      // position in other geom frame
      mjtNum tmp[3], lpos[3];
      mju_sub3(tmp, xpos, d->geom_xpos + 3*geom);
      mju_mulMatTVec3(lpos, d->geom_xmat + 9*geom, tmp);

      // SDF plugins are in the original mesh frame
      if (sdf_ptr[0] != NULL) {
        mjtNum mesh_mat[9];
        mju_quat2Mat(mesh_mat, m->mesh_quat + 4 * m->geom_dataid[geom]);
        mju_mulMatVec3(lpos, mesh_mat, lpos);
        mju_addTo3(lpos, m->mesh_pos + 3 * m->geom_dataid[geom]);
      }

      // compute distance
      mjtNum depth = mju_min(mjc_distance(m, d, &geom_sdf, lpos), 0);
      if (depth == 0) {
        continue;
      }

      // get velocity in global frame
      mjtNum vel_sensor[6], vel_other[6], vel_rel[3];
      mju_transformSpatial(
          vel_sensor, d->cvel + 6 * parent_weld, 0, xpos,
          d->subtree_com + 3 * m->body_rootid[parent_weld], NULL);
      mju_transformSpatial(
          vel_other, d->cvel + 6 * body, 0, xpos,
          d->subtree_com + 3 * m->body_rootid[body], NULL);
      mju_sub3(vel_rel, vel_sensor+3, vel_other+3);

      // take max penetration depth (SDF distance is negative; negate for positive output)
      t->sensordata[0*ncon + j] = mju_max(t->sensordata[0*ncon + j], -depth);

      if (has_frame) {
        mjtNum vel_rel_geom[3];
        mju_mulMatTVec3(vel_rel_geom, geom_mat, vel_rel);
        mjtNum tang1[3] = {mesh_normal[normal_stride*j + 3],
                           mesh_normal[normal_stride*j + 4],
                           mesh_normal[normal_stride*j + 5]};
        mjtNum tang2[3] = {mesh_normal[normal_stride*j + 6],
                           mesh_normal[normal_stride*j + 7],
                           mesh_normal[normal_stride*j + 8]};
        t->sensordata[1*ncon + j] += mju_abs(mju_dot3(vel_rel_geom, tang1));
        t->sensordata[2*ncon + j] += mju_abs(mju_dot3(vel_rel_geom, tang2));
      }
    }
  }
  return NULL;
}


static void tactileTask(const mjModel* m, mjData* d, void* arg, int thread_id, int task_id) {
  mjTactileTaskArgs* args_array = (mjTactileTaskArgs*)arg;
  tactile_taxel_batch(m, d, &args_array[task_id]);
}


// apply cutoff to sensor i, clamping values in data buffer
static void apply_cutoff(const mjModel* m, int i, mjtNum* data) {
  mjtNum cutoff = m->sensor_cutoff[i];
  if (cutoff <= 0) {
    return;
  }

  // cutoff ignored for contact and fromto sensors (but used by fromto sensors in a different way)
  mjtSensor type = (mjtSensor)m->sensor_type[i];
  if (type == mjSENS_CONTACT || type == mjSENS_GEOMFROMTO) {
    return;
  }

  int dim = m->sensor_dim[i];

  for (int j=0; j < dim; j++) {
    // real: apply on both sides
    if (m->sensor_datatype[i] == mjDATATYPE_REAL) {
      data[j] = mju_clip(data[j], -cutoff, cutoff);
    }

    // positive: apply on positive side only
    else if (m->sensor_datatype[i] == mjDATATYPE_POSITIVE) {
      data[j] = mju_min(cutoff, data[j]);
    }
  }
}


// get xpos and xmat pointers to an object in mjData
static void get_xpos_xmat(const mjData* d, mjtObj type, int id, int sensor_id,
                          mjtNum **xpos, mjtNum **xmat) {
  switch (type) {
  case mjOBJ_XBODY:
    *xpos = d->xpos + 3*id;
    *xmat = d->xmat + 9*id;
    break;
  case mjOBJ_BODY:
    *xpos = d->xipos + 3*id;
    *xmat = d->ximat + 9*id;
    break;
  case mjOBJ_GEOM:
    *xpos = d->geom_xpos + 3*id;
    *xmat = d->geom_xmat + 9*id;
    break;
  case mjOBJ_SITE:
    *xpos = d->site_xpos + 3*id;
    *xmat = d->site_xmat + 9*id;
    break;
  case mjOBJ_CAMERA:
    *xpos = d->cam_xpos + 3*id;
    *xmat = d->cam_xmat + 9*id;
    break;
  default:
    mjERROR("invalid object type in sensor %d", sensor_id);
  }
}


// get global quaternion of an object in mjData
static void get_xquat(const mjModel* m, const mjData* d, mjtObj type, int id, int sensor_id,
                      mjtNum *quat) {
  switch (type) {
  case mjOBJ_XBODY:
    mju_copy4(quat, d->xquat+4*id);
    break;
  case mjOBJ_BODY:
    mju_mulQuat(quat, d->xquat+4*id, m->body_iquat+4*id);
    break;
  case mjOBJ_GEOM:
    mju_mulQuat(quat, d->xquat+4*m->geom_bodyid[id], m->geom_quat+4*id);
    break;
  case mjOBJ_SITE:
    mju_mulQuat(quat, d->xquat+4*m->site_bodyid[id], m->site_quat+4*id);
    break;
  case mjOBJ_CAMERA:
    mju_mulQuat(quat, d->xquat+4*m->cam_bodyid[id], m->cam_quat+4*id);
    break;
  default:
    mjERROR("invalid object type in sensor %d", sensor_id);
  }
}


static void cam_project(mjtNum sensordata[2], const mjtNum target_xpos[3],
                        const mjtNum cam_xpos[3], const mjtNum cam_xmat[9],
                        const int cam_res[2], mjtNum cam_fovy,
                        const float cam_intrinsic[4], const float cam_sensorsize[2]) {
  mjtNum fx, fy;

  // focal transformation
  if (cam_sensorsize[0] && cam_sensorsize[1]) {
    fx = cam_intrinsic[0] / cam_sensorsize[0] * cam_res[0];
    fy = cam_intrinsic[1] / cam_sensorsize[1] * cam_res[1];
  } else {
    fx = fy = .5 / mju_tan(cam_fovy * mjPI / 360.) * cam_res[1];
  }

  // relative position in world frame
  mjtNum relative_pos[3];
  mju_sub3(relative_pos, target_xpos, cam_xpos);

  // project to camera frame: cam_pos = cam_xmat^T * relative_pos
  mjtNum cam_pos[3];
  mju_mulMatTVec(cam_pos, cam_xmat, relative_pos, 3, 3);

  // avoid dividing by tiny numbers
  mjtNum denom = cam_pos[2];
  if (mju_abs(denom) < mjMINVAL) {
    if (denom < 0) {
      denom = mju_min(denom, -mjMINVAL);
    } else {
      denom = mju_max(denom, mjMINVAL);
    }
  }

  // compute projection
  sensordata[0] = -fx * (cam_pos[0] / denom) + 0.5 * (mjtNum)cam_res[0];
  sensordata[1] =  fy * (cam_pos[1] / denom) + 0.5 * (mjtNum)cam_res[1];
}


// check if a contact body/geom matches a sensor spec (type, id)
static int checkMatch(const mjModel* m, int body, int geom, mjtObj type, int id) {
  if (type == mjOBJ_UNKNOWN) return 1;
  if (type == mjOBJ_SITE)    return 1;  // already passed site filter test
  if (type == mjOBJ_GEOM)    return id == geom;
  if (type == mjOBJ_BODY)    return id == body;
  if (type == mjOBJ_XBODY) {
    // traverse up the tree from body, return true if we land on id
    while (body > id) {
      body = m->body_parentid[body];
    }
    return body == id;
  }

  return 0;
}

//   0: no match
//   1: match, use contact normal
//  -1: match, flip contact normal
static int matchContact(const mjModel* m, const mjData* d, int conid,
                        mjtObj type1, int id1, mjtObj type2, int id2) {
  // no criterion: quick match
  if (type1 == mjOBJ_UNKNOWN && type2 == mjOBJ_UNKNOWN) {
    return 1;
  }

  // site filter
  if (type1 == mjOBJ_SITE) {
    if (!mj_insideSite(m, d, id1, d->contact[conid].pos)) {
      return 0;
    }
  }

  // get geom, body ids
  int geom1 = d->contact[conid].geom[0];
  int geom2 = d->contact[conid].geom[1];
  int body1 = geom1 >= 0
      ? m->geom_bodyid[geom1]
      : mj_flexBody(m, &d->contact[conid], 0);
  int body2 = geom2 >= 0
      ? m->geom_bodyid[geom2]
      : mj_flexBody(m, &d->contact[conid], 1);

  // check match of sensor objects with contact objects
  int match11 = checkMatch(m, body1, geom1, type1, id1);
  int match12 = checkMatch(m, body2, geom2, type1, id1);
  int match21 = checkMatch(m, body1, geom1, type2, id2);
  int match22 = checkMatch(m, body2, geom2, type2, id2);

  // if a sensor object is specified, it must be involved in the contact
  if (!match11 && !match12) return 0;
  if (!match21 && !match22) return 0;

  // determine direction
  if (type1 != mjOBJ_UNKNOWN && type2 != mjOBJ_UNKNOWN) {
    // both obj1 and obj2 specified: direction depends on order
    int order_regular = match11 && match22;
    int order_reverse = match12 && match21;
    if (order_regular && !order_reverse) return 1;
    if (order_reverse && !order_regular) return -1;
    if (order_regular && order_reverse)  return 1;  // ambiguous, return 1
  } else if (type1 != mjOBJ_UNKNOWN) {
    // only obj1 specified: normal points away from obj1
    return match11 ? 1 : -1;
  } else if (type2 != mjOBJ_UNKNOWN) {
    // only obj2 specified: normal points towards obj2
    return match22 ? 1 : -1;
  }

  // should not occur, all conditions are covered above
  return 0;
}


// fill in output data for contact sensor for all fields
//   if flg_flip > 0, normal/tangent rotate 180 about frame[2]
//   force/torque flip-z s.t. force is equal-and-opposite in new contact frame
static void copySensorData(const mjModel* m, const mjData* d,
                           mjtNum* data[mjNCONDATA], int id, int flg_flip, int nfound) {
  // found flag
  if (data[mjCONDATA_FOUND]) *data[mjCONDATA_FOUND] = nfound;

  // contact force and torque
  if (data[mjCONDATA_FORCE] || data[mjCONDATA_TORQUE]) {
    mjtNum forcetorque[6];
    mj_contactForce(m, d, id, forcetorque);
    if (data[mjCONDATA_FORCE]) {
      mju_copy3(data[mjCONDATA_FORCE], forcetorque);
      if (flg_flip) data[mjCONDATA_FORCE][2] *= -1;
    }
    if (data[mjCONDATA_TORQUE]) {
      mju_copy3(data[mjCONDATA_TORQUE], forcetorque+3);
      if (flg_flip) data[mjCONDATA_TORQUE][2] *= -1;
    }
  }

  // contact penetration distance
  if (data[mjCONDATA_DIST]) {
    *data[mjCONDATA_DIST] = d->contact[id].dist;
  }

  // contact position
  if (data[mjCONDATA_POS]) {
    mju_copy3(data[mjCONDATA_POS], d->contact[id].pos);
  }

  // contact normal
  if (data[mjCONDATA_NORMAL]) {
    mju_copy3(data[mjCONDATA_NORMAL], d->contact[id].frame);
    if (flg_flip) mju_scl3(data[mjCONDATA_NORMAL], data[mjCONDATA_NORMAL], -1);
  }

  // contact first tangent
  if (data[mjCONDATA_TANGENT]) {
    mju_copy3(data[mjCONDATA_TANGENT], d->contact[id].frame+3);
    if (flg_flip) mju_scl3(data[mjCONDATA_TANGENT], data[mjCONDATA_TANGENT], -1);
  }
}


// compute total wrench about one point, in the global frame
static void total_wrench(mjtNum force[3], mjtNum torque[3], const mjtNum point[3], int n,
                        const mjtNum *wrench, const mjtNum *pos, const mjtNum *frame) {
  mju_zero3(force);
  mju_zero3(torque);

  for (int j = 0; j < n; ++j) {
    // rotate force, torque from contact frame to global frame
    mjtNum force_j[3], torque_j[3];
    mju_mulMatTVec3(force_j, frame + 9*j, wrench + 6*j);
    mju_mulMatTVec3(torque_j, frame + 9*j, wrench + 6*j + 3);

    // add to total force, torque
    mju_addTo3(force, force_j);
    mju_addTo3(torque, torque_j);

    // add induced moment:  torque += (pos - point) x force
    mjtNum diff[3];
    mju_sub3(diff, pos + 3*j, point);
    mjtNum induced_torque[3];
    mju_cross(induced_torque, diff, force_j);
    mju_addTo3(torque, induced_torque);
  }
}


//-------------------------------- sensor ----------------------------------------------------------

// fill one pixel's worth of rangefinder data, advance ptr
static mjtNum* fill_raydata(mjtNum* ptr, int dataspec, mjtNum dist,
                            const mjtNum origin[3], const mjtNum direction[3],
                            const mjtNum normal[3], const mjtNum cam_xpos[3],
                            const mjtNum cam_z[3]) {
  int hit = (dist >= 0);

  if (dataspec & (1 << mjRAYDATA_DIST)) {
    *ptr++ = dist;
  }
  if (dataspec & (1 << mjRAYDATA_DIR)) {
    if (hit) mju_copy3(ptr, direction);
    else     mju_zero3(ptr);
    ptr += 3;
  }
  if (dataspec & (1 << mjRAYDATA_ORIGIN)) {
    mju_copy3(ptr, origin);
    ptr += 3;
  }

  // compute point if needed for POINT or DEPTH fields
  mjtNum point[3] = {0, 0, 0};
  if ((dataspec & (1 << mjRAYDATA_POINT)) || (dataspec & (1 << mjRAYDATA_DEPTH))) {
    if (hit) mju_addScl3(point, origin, direction, dist);
  }

  if (dataspec & (1 << mjRAYDATA_POINT)) {
    mju_copy3(ptr, point);
    ptr += 3;
  }
  if (dataspec & (1 << mjRAYDATA_NORMAL)) {
    if (hit) mju_copy3(ptr, normal);
    else     mju_zero3(ptr);
    ptr += 3;
  }
  if (dataspec & (1 << mjRAYDATA_DEPTH)) {
    if (hit) {
      if (cam_z) {
        // camera depth: project onto camera z-axis
        mjtNum delta[3];
        mju_sub3(delta, point, cam_xpos);
        *ptr++ = -mju_dot3(delta, cam_z);
      } else {
        // site sensor: depth = dist
        *ptr++ = dist;
      }
    } else {
      *ptr++ = -1;
    }
  }

  return ptr;
}


// compute position-stage sensor value, write to data buffer
static void mj_computeSensorPos(const mjModel* m, mjData* d, int i, mjtNum* sensordata) {
  int ne = d->ne, nf = d->nf, nefc = d->nefc;
  mjtSensor type = (mjtSensor)m->sensor_type[i];
  int objtype = m->sensor_objtype[i];
  int objid = m->sensor_objid[i];
  int refid = m->sensor_refid[i];
  int reftype = m->sensor_reftype[i];

  mjtNum rvec[3], *xpos, *xmat, *xpos_ref, *xmat_ref;

  // process according to type
  switch (type) {
  case mjSENS_MAGNETOMETER:                           // magnetometer
    mju_mulMatTVec(sensordata, d->site_xmat+9*objid, m->opt.magnetic, 3, 3);
    break;

  case mjSENS_CAMPROJECTION:                          // camera projection
    cam_project(sensordata, d->site_xpos+3*objid, d->cam_xpos+3*refid,
                d->cam_xmat+9*refid, m->cam_resolution+2*refid, m->cam_fovy[refid],
                m->cam_intrinsic+4*refid, m->cam_sensorsize+2*refid);
    break;

  case mjSENS_RANGEFINDER:                            // rangefinder
    {
      // get dataspec
      int dataspec = m->sensor_intprm[i*mjNSENS];

      if (objtype == mjOBJ_SITE) {
        // site-attached rangefinder: single ray
        rvec[0] = d->site_xmat[9*objid+2];
        rvec[1] = d->site_xmat[9*objid+5];
        rvec[2] = d->site_xmat[9*objid+8];
        const mjtNum* origin = d->site_xpos + 3*objid;

        int geomid;
        mjtNum normal[3];
        mjtNum* p_normal = (dataspec & (1 << mjRAYDATA_NORMAL)) ? normal : NULL;
        mjtNum dist = mj_ray(m, d, origin, rvec, NULL, 1,
                             m->site_bodyid[objid], &geomid, p_normal);

        // for site sensor: pass NULL for cam_z so depth = dist
        fill_raydata(sensordata, dataspec, dist, origin, rvec, normal, NULL, NULL);

      } else {
        // camera-attached rangefinder: depth image
        const int width = m->cam_resolution[2*objid];
        const int height = m->cam_resolution[2*objid+1];
        const int bodyexclude = m->cam_bodyid[objid];
        const mjtNum* cam_xpos = d->cam_xpos + 3*objid;
        const mjtNum* cam_xmat = d->cam_xmat + 9*objid;
        const int projection = m->cam_projection[objid];

        // camera z-axis (pointing into scene, negative of optical axis)
        mjtNum cam_z[3] = {cam_xmat[2], cam_xmat[5], cam_xmat[8]};

        // compute focal length in pixels using helper
        mjtNum fx, fy, cx, cy, ortho_extent;
        mju_camIntrinsics(m, objid, &fx, &fy, &cx, &cy, &ortho_extent);

        if (projection == mjPROJ_PERSPECTIVE) {
          // perspective: all rays share origin, different directions
          const int npixel = width * height;
          mj_markStack(d);
          mjtNum* vec = mjSTACKALLOC(d, 3*npixel, mjtNum);
          int* geomid = mjSTACKALLOC(d, npixel, int);
          mjtNum* dist = mjSTACKALLOC(d, npixel, mjtNum);
          mjtNum* normals = NULL;
          if (dataspec & (1 << mjRAYDATA_NORMAL)) {
            normals = mjSTACKALLOC(d, 3*npixel, mjtNum);
          }

          // compute ray directions using helper (normalized)
          for (int row = 0; row < height; row++) {
            for (int col = 0; col < width; col++) {
              int idx = row*width + col;
              mjtNum origin[3];
              mju_camPixelRay(origin, vec + 3*idx, cam_xpos, cam_xmat,
                              col, row, fx, fy, cx, cy, projection, ortho_extent);
            }
          }

          // cast all rays with normals if needed
          mj_multiRay(m, d, cam_xpos, vec, NULL, 1, bodyexclude,
                      geomid, dist, normals, npixel, mjMAXVAL);

          // fill in output for each pixel
          for (int row = 0; row < height; row++) {
            for (int col = 0; col < width; col++) {
              int idx = row*width + col;
              mjtNum* normal_ptr = normals ? normals + 3*idx : NULL;
              sensordata = fill_raydata(sensordata, dataspec, dist[idx], cam_xpos,
                                        vec + 3*idx, normal_ptr, cam_xpos, cam_z);
            }
          }

          mj_freeStack(d);
        } else {
          // orthographic: parallel rays, different origins
          for (int row = 0; row < height; row++) {
            for (int col = 0; col < width; col++) {
              mjtNum origin[3], direction[3];
              mju_camPixelRay(origin, direction, cam_xpos, cam_xmat,
                              col, row, fx, fy, cx, cy, projection, ortho_extent);

              int geomid;
              mjtNum normal[3];
              mjtNum dist = mj_ray(m, d, origin, direction, NULL, 1,
                                   bodyexclude, &geomid, normal);

              sensordata = fill_raydata(sensordata, dataspec, dist, origin, direction,
                                 normal, cam_xpos, cam_z);
            }
          }
        }
      }
    }

    break;

  case mjSENS_JOINTPOS:                               // joint position
    sensordata[0] = d->qpos[m->jnt_qposadr[objid]];
    break;

  case mjSENS_TENDONPOS:                              // tendon position
    sensordata[0] = d->ten_length[objid];
    break;

  case mjSENS_ACTUATORPOS:                            // actuator position, one per output
    mju_copy(sensordata, d->actuator_length + m->actuator_outadr[objid], m->sensor_dim[i]);
    break;

  case mjSENS_BALLQUAT:                               // ball joint quaternion
    mju_copy4(sensordata, d->qpos+m->jnt_qposadr[objid]);
    mju_normalize4(sensordata);
    break;

  case mjSENS_JOINTLIMITPOS:                          // joint limit distance-margin
    sensordata[0] = 0;
    for (int j=ne+nf; j < nefc; j++) {
      if (d->efc_type[j] == mjCNSTR_LIMIT_JOINT && d->efc_id[j] == objid) {
        sensordata[0] = d->efc_pos[j] - d->efc_margin[j];
        break;
      }
    }
    break;

  case mjSENS_TENDONLIMITPOS:                         // tendon limit distance-margin
    sensordata[0] = 0;
    for (int j=ne+nf; j < nefc; j++) {
      if (d->efc_type[j] == mjCNSTR_LIMIT_TENDON && d->efc_id[j] == objid) {
        sensordata[0] = d->efc_pos[j] - d->efc_margin[j];
        break;
      }
    }
    break;

  case mjSENS_FRAMEPOS:                               // 3D position
  case mjSENS_FRAMEXAXIS:                             // x-axis of object's frame
  case mjSENS_FRAMEYAXIS:                             // y-axis of object's frame
  case mjSENS_FRAMEZAXIS:                             // z-axis of object's frame
    // get xpos and xmat pointers for object frame
    get_xpos_xmat(d, objtype, objid, i, &xpos, &xmat);

    // reference frame unspecified: global frame
    if (refid == -1) {
      if (type == mjSENS_FRAMEPOS) {
        mju_copy3(sensordata, xpos);
      } else {
        // offset = (0 or 1 or 2) for (x or y or z)-axis sensors, respectively
        int offset = type - mjSENS_FRAMEXAXIS;
        sensordata[0] = xmat[offset+0];
        sensordata[1] = xmat[offset+3];
        sensordata[2] = xmat[offset+6];
      }
    }

    // reference frame specified
    else {
      get_xpos_xmat(d, reftype, refid, i, &xpos_ref, &xmat_ref);
      if (type == mjSENS_FRAMEPOS) {
        mju_sub3(rvec, xpos, xpos_ref);
        mju_mulMatTVec3(sensordata, xmat_ref, rvec);
      } else {
        // offset = (0 or 1 or 2) for (x or y or z)-axis sensors, respectively
        int offset = type - mjSENS_FRAMEXAXIS;
        mjtNum axis[3] = {xmat[offset], xmat[offset+3], xmat[offset+6]};
        mju_mulMatTVec3(sensordata, xmat_ref, axis);
      }
    }
    break;

  case mjSENS_FRAMEQUAT:                              // orientation quaternion
  {
    // get global object quaternion
    mjtNum objquat[4];
    get_xquat(m, d, objtype, objid, i, objquat);

    // reference frame unspecified: copy object quaternion
    if (refid == -1) {
      mju_copy4(sensordata, objquat);
    } else {
      // reference frame specified, get global reference quaternion
      mjtNum refquat[4];
      get_xquat(m, d, reftype, refid, i, refquat);

      // relative quaternion
      mju_negQuat(refquat, refquat);
      mju_mulQuat(sensordata, refquat, objquat);
    }
  }
  break;

  case mjSENS_SUBTREECOM:                             // subtree center of mass
    mju_copy3(sensordata, d->subtree_com+3*objid);
    break;

  case mjSENS_INSIDESITE:                             // 1 if object is inside site
    get_xpos_xmat(d, objtype, objid, i, &xpos, &xmat);

    // for massless bodies with positive subtree mass (e.g., flex parents),
    // xipos is the static body frame origin; use subtree_com instead
    if (objtype == mjOBJ_BODY && objid > 0 &&
        m->body_mass[objid] < mjMINVAL &&
        m->body_subtreemass[objid] >= mjMINVAL) {
      xpos = d->subtree_com + 3*objid;
    }

    sensordata[0] = mj_insideSite(m, d, refid, xpos);
    break;

  case mjSENS_GEOMDIST:                               // signed distance between two geoms
  case mjSENS_GEOMNORMAL:                             // normal direction between two geoms
  case mjSENS_GEOMFROMTO:                             // segment between two geoms
    {
      mjtNum cutoff = m->sensor_cutoff[i];

      // initialize outputs
      mjtNum dist = cutoff;    // collision distance
      mjtNum fromto[6] = {0};  // segment between geoms

      // get lists of geoms to collide
      int n1, id1;
      if (objtype == mjOBJ_BODY) {
        n1 = m->body_geomnum[objid];
        id1 = m->body_geomadr[objid];
      } else {
        n1 = 1;
        id1 = objid;
      }
      int n2, id2;
      if (reftype == mjOBJ_BODY) {
        n2 = m->body_geomnum[refid];
        id2 = m->body_geomadr[refid];
      } else {
        n2 = 1;
        id2 = refid;
      }

      // collide all pairs
      for (int geom1=id1; geom1 < id1+n1; geom1++) {
        for (int geom2=id2; geom2 < id2+n2; geom2++) {
          mjtNum fromto_new[6] = {0};
          mjtNum dist_new = mj_geomDistance(m, d, geom1, geom2, cutoff, fromto_new);
          if (dist_new < dist) {
            dist = dist_new;
            mju_copy(fromto, fromto_new, 6);
          }
        }
      }

      // write data
      if (type == mjSENS_GEOMDIST) {
        sensordata[0] = dist;
      } else if (type == mjSENS_GEOMNORMAL) {
        mjtNum normal[3] = {fromto[3]-fromto[0], fromto[4]-fromto[1], fromto[5]-fromto[2]};
        if (normal[0] || normal[1] || normal[2]) {
          mju_normalize3(normal);
        }
        mju_copy3(sensordata, normal);
      } else {  // mjSENS_GEOMFROMTO
        mju_copy(sensordata, fromto, 6);
      }
    }
    break;

  case mjSENS_E_POTENTIAL:                            // potential energy
    if (!d->flg_energypos) {
      mj_energyPos(m, d);
    }
    sensordata[0] = d->energy[0];
    break;

  case mjSENS_E_KINETIC:                              // kinetic energy
    if (!d->flg_energyvel) {
      mj_energyVel(m, d);
    }
    sensordata[0] = d->energy[1];
    break;

  case mjSENS_CLOCK:                                  // simulation time
    sensordata[0] = d->time;
    break;

  default:
    mjERROR("invalid sensor type in POS stage, sensor %d", i);
  }
}


// compute velocity-stage sensor value, write to data buffer
static void mj_computeSensorVel(const mjModel* m, mjData* d, int i, mjtNum* sensordata) {
  int ne = d->ne, nf = d->nf, nefc = d->nefc;
  mjtSensor type = (mjtSensor)m->sensor_type[i];
  int objtype = m->sensor_objtype[i];
  int objid = m->sensor_objid[i];
  int refid = m->sensor_refid[i];
  int reftype = m->sensor_reftype[i];

  mjtNum xvel[6];

  // call mj_subtreeVel for sensors that need it (unless already computed)
  if (!d->flg_subtreevel &&
      (type == mjSENS_SUBTREELINVEL || type == mjSENS_SUBTREEANGMOM)) {
    mj_subtreeVel(m, d);
  }

  // process according to type
  switch (type) {
  case mjSENS_VELOCIMETER:                            // velocimeter
    // xvel = site velocity, in site frame
    mj_objectVelocity(m, d, mjOBJ_SITE, objid, xvel, 1);

    // assign linear velocity
    mju_copy3(sensordata, xvel+3);
    break;

  case mjSENS_GYRO:                                   // gyro
    // xvel = site velocity, in site frame
    mj_objectVelocity(m, d, mjOBJ_SITE, objid, xvel, 1);

    // assign angular velocity
    mju_copy3(sensordata, xvel);
    break;

  case mjSENS_JOINTVEL:                               // joint velocity
    sensordata[0] = d->qvel[m->jnt_dofadr[objid]];
    break;

  case mjSENS_TENDONVEL:                              // tendon velocity
    sensordata[0] = d->ten_velocity[objid];
    break;

  case mjSENS_ACTUATORVEL:                            // actuator velocity, one per output
    mju_copy(sensordata, d->actuator_velocity + m->actuator_outadr[objid], m->sensor_dim[i]);
    break;

  case mjSENS_BALLANGVEL:                             // ball joint angular velocity
    mju_copy3(sensordata, d->qvel+m->jnt_dofadr[objid]);
    break;

  case mjSENS_JOINTLIMITVEL:                          // joint limit velocity
    sensordata[0] = 0;
    for (int j=ne+nf; j < nefc; j++) {
      if (d->efc_type[j] == mjCNSTR_LIMIT_JOINT && d->efc_id[j] == objid) {
        sensordata[0] = d->efc_vel[j];
        break;
      }
    }
    break;

  case mjSENS_TENDONLIMITVEL:                         // tendon limit velocity
    sensordata[0] = 0;
    for (int j=ne+nf; j < nefc; j++) {
      if (d->efc_type[j] == mjCNSTR_LIMIT_TENDON && d->efc_id[j] == objid) {
        sensordata[0] = d->efc_vel[j];
        break;
      }
    }
    break;

  case mjSENS_FRAMELINVEL:                            // 3D linear velocity
  case mjSENS_FRAMEANGVEL:                            // 3D angular velocity
    // xvel = 6D object velocity, in global frame
    mj_objectVelocity(m, d, objtype, objid, xvel, 0);

    if (refid > -1) {  // reference frame specified
      mjtNum *xpos, *xmat, *xpos_ref, *xmat_ref, xvel_ref[6], rel_vel[6], cross[3], rvec[3];

      // in global frame: object and reference position, reference orientation and velocity
      get_xpos_xmat(d, objtype, objid, i, &xpos, &xmat);
      get_xpos_xmat(d, reftype, refid, i, &xpos_ref, &xmat_ref);
      mj_objectVelocity(m, d, reftype, refid, xvel_ref, 0);

      // subtract velocities
      mju_sub(rel_vel, xvel, xvel_ref, 6);

      // linear velocity: add correction due to rotating reference frame
      mju_sub3(rvec, xpos, xpos_ref);
      mju_cross(cross, rvec, xvel_ref);
      mju_addTo3(rel_vel+3, cross);

      // project into reference frame
      mju_mulMatTVec3(xvel, xmat_ref, rel_vel);
      mju_mulMatTVec3(xvel+3, xmat_ref, rel_vel+3);
    }

    // copy linear or angular component
    if (type == mjSENS_FRAMELINVEL) {
      mju_copy3(sensordata, xvel+3);
    } else {
      mju_copy3(sensordata, xvel);
    }
    break;

  case mjSENS_SUBTREELINVEL:                          // subtree linear velocity
    mju_copy3(sensordata, d->subtree_linvel+3*objid);
    break;

  case mjSENS_SUBTREEANGMOM:                          // subtree angular momentum
    mju_copy3(sensordata, d->subtree_angmom+3*objid);
    break;

  default:
    mjERROR("invalid type in VEL stage, sensor %d", i);
  }
}


// compute acceleration-stage sensor value, write to data buffer
static void mj_computeSensorAcc(const mjModel* m, mjData* d, int i, mjtNum* sensordata) {
  int ne = d->ne, nf = d->nf, nefc = d->nefc, nactuator = m->nactuator;
  mjtSensor type = (mjtSensor)m->sensor_type[i];
  int objtype = m->sensor_objtype[i];
  int objid = m->sensor_objid[i];

  mjtNum tmp[6], conforce[6], conray[3], frc;
  const mjContact* con;
  int rootid, bodyid;

  // call mj_rnePostConstraint for sensors that need it (unless already computed)
  if (!d->flg_rnepost &&
      (type == mjSENS_ACCELEROMETER ||
       type == mjSENS_FORCE         ||
       type == mjSENS_TORQUE        ||
       type == mjSENS_FRAMELINACC   ||
       type == mjSENS_FRAMEANGACC)) {
    mj_rnePostConstraint(m, d);
  }

  // process according to type
  switch (type) {
  case mjSENS_TOUCH:                                  // touch
    // extract body data
    bodyid = m->site_bodyid[objid];

    // clear result
    sensordata[0] = 0;

    // find contacts in sensor zone, add normal forces
    for (int j=0; j < d->ncon; j++) {
      // contact pointer, contacting bodies  (-1 for flex)
      con = d->contact + j;
      int conbody[2];
      for (int k=0; k < 2; k++) {
        conbody[k] = (con->geom[k] >= 0)
            ? m->geom_bodyid[con->geom[k]]
            : mj_flexBody(m, con, k);
      }

      // select contacts involving sensorized body
      if (con->efc_address >= 0 && (bodyid == conbody[0] || bodyid == conbody[1])) {
        // get contact force:torque in contact frame
        mj_contactForce(m, d, j, conforce);

        // nothing to do if normal is zero
        if (conforce[0] <= 0) {
          continue;
        }

        // convert contact normal force to global frame, normalize
        mju_scl3(conray, con->frame, conforce[0]);
        mju_normalize3(conray);

        // flip ray direction if sensor is on body2
        if (bodyid == conbody[1]) {
          mju_scl3(conray, conray, -1);
        }

        // add if ray-zone intersection (always true when con->pos inside zone)
        if (mju_rayGeom(d->site_xpos+3*objid, d->site_xmat+9*objid,
                        m->site_size+3*objid, con->pos, conray,
                        m->site_type[objid], NULL) >= 0) {
          sensordata[0] += conforce[0];
        }
      }
    }
    break;

  case mjSENS_CONTACT:                                // contact
    {
      // local reduce enum for readability
      enum {
        REDUCE_NONE     = 0,
        REDUCE_MINDIST  = 1,
        REDUCE_MAXFORCE = 2,
        REDUCE_NETFORCE = 3,
      };

      // prepare sizes and indices
      int dataspec = m->sensor_intprm[i*mjNSENS];
      int size = mju_condataSize(dataspec);  // size of each slot
      int dim = m->sensor_dim[i];            // total sensor array dimension
      int num = dim / size;                  // number of slots
      int reftype = m->sensor_reftype[i];
      int refid = m->sensor_refid[i];
      int reduce = m->sensor_intprm[i*mjNSENS+1];

      // clear all outputs, prepare data pointers
      mju_zero(sensordata, dim);
      mjtNum* data[mjNCONDATA] = {NULL};
      for (int j=0; j < mjNCONDATA; j++) {
        if (dataspec & (1 << j)) {
          data[j] = sensordata;
          sensordata += mjCONDATA_SIZE[j];
        }
      }

      // prepare for matching loop
      int nmatch = 0;
      mj_markStack(d);
      ContactInfo *match = mjSTACKALLOC(d, d->ncon, ContactInfo);

      // find matching contacts
      for (int j=0; j < d->ncon; j++) {
        // check match condition
        int match_j = matchContact(m, d, j, objtype, objid, reftype, refid);
        if (!match_j) {
          continue;
        }

        // save id and flip flag
        match[nmatch].id = j;
        match[nmatch].flip = match_j < 0;

        // save sorting criterion, if required
        if (reduce == REDUCE_MINDIST) {
          match[nmatch].criterion = d->contact[j].dist;
        } else if (reduce == REDUCE_MAXFORCE) {
          mjtNum forcetorque[6];
          mj_contactForce(m, d, j, forcetorque);
          match[nmatch].criterion = -mju_dot3(forcetorque, forcetorque);
        }

        // increment number of matching contacts
        nmatch++;
      }

      // number of slots to be filled
      int nslot = mjMIN(num, nmatch);

      // partial sort to get bottom nslot contacts if sorted reduction
      if (reduce == REDUCE_MINDIST || reduce == REDUCE_MAXFORCE) {
        ContactInfo *heap = mjSTACKALLOC(d, nslot, ContactInfo);
        ContactSelect(match, heap, nmatch, nslot, NULL);
      }

      // netforce reduction
      else if (reduce == REDUCE_NETFORCE) {
        mjtNum *wrench = mjSTACKALLOC(d, nmatch * 6, mjtNum);
        mjtNum *pos = mjSTACKALLOC(d, nmatch * 3, mjtNum);
        mjtNum *frame = mjSTACKALLOC(d, nmatch * 9, mjtNum);

        // precompute wrenches, positions, and frames, maybe flip wrench
        for (int j=0; j < nmatch; j++) {
          int conid = match[j].id;
          mj_contactForce(m, d, conid, wrench + 6*j);
          mju_copy3(pos + 3*j, d->contact[conid].pos);
          mju_copy9(frame + 9*j, d->contact[conid].frame);
          if (match[j].flip) {
            mju_scl(wrench + 6*j , wrench + 6*j, -1, 6);
          }
        }

        // compute point: force-weighted centroid of contact positions
        mjtNum point[3] = {0};
        mjtNum total_force = 0;
        for (int j=0; j < nmatch; j++) {
          mjtNum weight = mju_norm3(wrench + 6*j);
          mju_addToScl3(point, pos + 3*j, weight);
          total_force += weight;
        }
        mju_scl3(point, point, 1.0 / mjMAX(total_force, mjMINVAL));

        // compute total wrench about point, in the global frame
        mjtNum force[3], torque[3];
        total_wrench(force, torque, point, nmatch, wrench, pos, frame);

        // write data to slot 0
        if (data[mjCONDATA_FOUND])   *data[mjCONDATA_FOUND] = nmatch;
        if (data[mjCONDATA_FORCE])   mju_copy3(data[mjCONDATA_FORCE], force);
        if (data[mjCONDATA_TORQUE])  mju_copy3(data[mjCONDATA_TORQUE], torque);
        if (data[mjCONDATA_DIST])    *data[mjCONDATA_DIST] = 0;
        if (data[mjCONDATA_POS])     mju_copy3(data[mjCONDATA_POS], point);
        if (data[mjCONDATA_NORMAL])  data[mjCONDATA_NORMAL][0] = 1;
        if (data[mjCONDATA_TANGENT]) data[mjCONDATA_TANGENT][1] = 1;

        // done with this sensor
        mj_freeStack(d);
        break;
      }

      // copy data into slots, increment pointers
      for (int j=0; j < nslot; j++) {
        copySensorData(m, d, data, match[j].id, match[j].flip, nmatch);
        for (int k=0; k < mjNCONDATA; k++) {
          if (data[k]) data[k] += size;
        }
      }

      mj_freeStack(d);
    }
    break;

  case mjSENS_TACTILE:                                // tactile
    {
      mj_markStack(d);

      // get parent weld id
      int mesh_id = m->sensor_objid[i];
      int geom_id = m->sensor_refid[i];
      int parent_body = m->geom_bodyid[geom_id];
      int parent_weld = m->body_weldid[parent_body];
      int nchannel = m->sensor_dim[i] / m->mesh_vertnum[mesh_id];

      // clear sensordata and distance matrix
      mju_zero(sensordata, m->sensor_dim[i]);

      // deduplicate colliding geoms using a stack-allocated byte mask
      char* seen_geom = mjSTACKALLOC(d, m->ngeom, char);
      memset(seen_geom, 0, m->ngeom);
      int* contact_geom_ids = mj_stackAllocInt(d, mju_min(2 * d->ncon, m->ngeom));
      int ncontact = 0;
      for (int k = 0; k < d->ncon; k++) {
        int g1 = d->contact[k].geom1;
        int g2 = d->contact[k].geom2;
        int body1 = (g1 >= 0)
            ? m->body_weldid[m->geom_bodyid[g1]]
            : m->body_weldid[mj_flexBody(m, &d->contact[k], 0)];
        int body2 = (g2 >= 0)
            ? m->body_weldid[m->geom_bodyid[g2]]
            : m->body_weldid[mj_flexBody(m, &d->contact[k], 1)];
        if (body1 == parent_weld && g2 >= 0 && g2 < m->ngeom && g2 != geom_id && !seen_geom[g2]) {
          seen_geom[g2] = 1;
          contact_geom_ids[ncontact++] = g2;
        }
        if (body2 == parent_weld && g1 >= 0 && g1 < m->ngeom && g1 != geom_id && !seen_geom[g1]) {
          seen_geom[g1] = 1;
          contact_geom_ids[ncontact++] = g1;
        }
      }

      // no contacts, return
      if (ncontact == 0) {
        mj_freeStack(d);
        break;
      }

      // all of the quadrature points are contact points
      int ncon = m->mesh_vertnum[mesh_id];

      // threshold for parallelization (taxel count below which sequential is faster)
      const int kTactileParallelThreshold = 1000;

      // parallel path: use mj_batch to process taxel batches
      int nthread = mju_numThread(d);
      if (nthread > 0 && ncon >= kTactileParallelThreshold) {
        int batch_size = (ncon + nthread - 1) / nthread;
        int ntask = (ncon + batch_size - 1) / batch_size;

        mjTactileTaskArgs* task_args = mjSTACKALLOC(d, ntask, mjTactileTaskArgs);

        for (int t = 0; t < ntask; t++) {
          task_args[t].sensor_id = i;
          task_args[t].mesh_id = mesh_id;
          task_args[t].geom_id = geom_id;
          task_args[t].parent_weld = parent_weld;
          task_args[t].ncontact = ncontact;
          task_args[t].nchannel = nchannel;
          task_args[t].contact_geom_ids = contact_geom_ids;
          task_args[t].start_taxel = t * batch_size;
          task_args[t].end_taxel = mju_min((t+1) * batch_size, ncon);
          task_args[t].sensordata = sensordata;
        }

        mju_dispatch(m, d, tactileTask, task_args, ntask);
      }
      // sequential path: call tactile_taxel_batch with full range
      else {
        mjTactileTaskArgs args;
        args.sensor_id = i;
        args.mesh_id = mesh_id;
        args.geom_id = geom_id;
        args.parent_weld = parent_weld;
        args.ncontact = ncontact;
        args.nchannel = nchannel;
        args.contact_geom_ids = contact_geom_ids;
        args.start_taxel = 0;
        args.end_taxel = ncon;
        args.sensordata = sensordata;
        tactile_taxel_batch(m, d, &args);
      }

      mj_freeStack(d);
    }
    break;

  case mjSENS_ACCELEROMETER:                          // accelerometer
    // tmp = site acceleration, in site frame
    mj_objectAcceleration(m, d, mjOBJ_SITE, objid, tmp, 1);

    // assign linear acceleration
    mju_copy3(sensordata, tmp+3);
    break;

  case mjSENS_FORCE:                                  // force
    // extract body data
    bodyid = m->site_bodyid[objid];
    rootid = m->body_rootid[bodyid];

    // tmp = interaction force between body and parent, in site frame
    mju_transformSpatial(tmp, d->cfrc_int+6*bodyid, 1,
                         d->site_xpos+3*objid, d->subtree_com+3*rootid, d->site_xmat+9*objid);

    // assign force
    mju_copy3(sensordata, tmp+3);
    break;

  case mjSENS_TORQUE:                                 // torque
    // extract body data
    bodyid = m->site_bodyid[objid];
    rootid = m->body_rootid[bodyid];

    // tmp = interaction force between body and parent, in site frame
    mju_transformSpatial(tmp, d->cfrc_int+6*bodyid, 1,
                         d->site_xpos+3*objid, d->subtree_com+3*rootid, d->site_xmat+9*objid);

    // assign torque
    mju_copy3(sensordata, tmp);
    break;

  case mjSENS_ACTUATORFRC:                            // actuator force, one per output
    mju_copy(sensordata, d->actuator_force + m->actuator_outadr[objid], m->sensor_dim[i]);
    break;

  case mjSENS_JOINTACTFRC:                            // actuator force at joint
    sensordata[0] = d->qfrc_actuator[m->jnt_dofadr[objid]];
    break;

  case mjSENS_TENDONACTFRC:                           // actuator force at tendon
    frc = 0.0;
    for (int j=0; j < nactuator; j++) {
      if (m->actuator_trntype[j] == mjTRN_TENDON && m->actuator_trnid[2*j] == objid) {
        frc += d->actuator_force[m->actuator_outadr[j]];
      }
    }
    sensordata[0] = frc;
    break;

  case mjSENS_JOINTLIMITFRC:                          // joint limit force
    sensordata[0] = 0;
    for (int j=ne+nf; j < nefc; j++) {
      if (d->efc_type[j] == mjCNSTR_LIMIT_JOINT && d->efc_id[j] == objid) {
        sensordata[0] = d->efc_force[j];
        break;
      }
    }
    break;

  case mjSENS_TENDONLIMITFRC:                         // tendon limit force
    sensordata[0] = 0;
    for (int j=ne+nf; j < nefc; j++) {
      if (d->efc_type[j] == mjCNSTR_LIMIT_TENDON && d->efc_id[j] == objid) {
        sensordata[0] = d->efc_force[j];
        break;
      }
    }
    break;

  case mjSENS_FRAMELINACC:                            // 3D linear acceleration
  case mjSENS_FRAMEANGACC:                            // 3D angular acceleration
    // get 6D object acceleration, in global frame
    mj_objectAcceleration(m, d, objtype, objid, tmp, 0);

    // copy linear or angular component
    if (type == mjSENS_FRAMELINACC) {
      mju_copy3(sensordata, tmp+3);
    } else {
      mju_copy3(sensordata, tmp);
    }
    break;

  default:
    mjERROR("invalid type in ACC stage, sensor %d", i);
  }
}


// compute value for one sensor, write to sensordata, apply cutoff
void mj_computeSensor(const mjModel* m, mjData* d, int i, mjtNum* sensordata) {
  switch (m->sensor_needstage[i]) {
  case mjSTAGE_POS:
    mj_computeSensorPos(m, d, i, sensordata);
    break;

  case mjSTAGE_VEL:
    mj_computeSensorVel(m, d, i, sensordata);
    break;

  case mjSTAGE_ACC:
    mj_computeSensorAcc(m, d, i, sensordata);
    break;

  default:
    mjERROR("invalid sensor stage for sensor %d", i);
  }

  // apply cutoff
  apply_cutoff(m, i, sensordata);
}


// compute sensor or read from history buffer (handles delay and interval logic)
static void compute_or_read_sensor(const mjModel* m, mjData* d, int i, mjtNum* sensordata) {
  int nsample = m->sensor_history[2*i];

  // no history: compute directly
  if (nsample <= 0) {
    mj_computeSensor(m, d, i, sensordata);
    return;
  }

  mjtNum delay = m->sensor_delay[i];
  int dim = m->sensor_dim[i];

  // delay > 0: read delayed value from buffer
  if (delay > 0) {
    int interp = m->sensor_history[2*i+1];
    const mjtNum* ptr = mj_readSensor(m, d, i, d->time, sensordata, interp);
    if (ptr) mju_copy(sensordata, ptr, dim);
    return;
  }

  // interval > 0: compute if interval condition satisfied, else read from buffer
  mjtNum interval = m->sensor_interval[2*i];
  if (interval > 0) {
    int historyadr = m->sensor_historyadr[i];
    mjtNum* buf = d->history + historyadr;
    mjtNum time_prev = buf[0];  // first slot stores time_prev

    if (time_prev + interval <= d->time) {
      // interval condition satisfied: compute new sensor value
      mj_computeSensor(m, d, i, sensordata);
    } else {
      // interval condition not satisfied: read from buffer
      int interp = m->sensor_history[2*i+1];
      const mjtNum* ptr = mj_readSensor(m, d, i, d->time, sensordata, interp);
      if (ptr) mju_copy(sensordata, ptr, dim);
    }
    return;
  }

  // history only, no delay or interval: compute directly
  mj_computeSensor(m, d, i, sensordata);
}


// compute user sensors: call user callback and apply cutoff
static void compute_user_sensors(const mjModel* m, mjData* d, mjtStage stage) {
  if (mjcb_sensor) {
    mjcb_sensor(m, d, stage);
  }

  // apply cutoff to user sensors
  for (int i=0; i < m->nsensor; i++) {
    if (m->sensor_type[i] == mjSENS_USER && m->sensor_needstage[i] == stage) {
      apply_cutoff(m, i, d->sensordata + m->sensor_adr[i]);
    }
  }
}


// compute plugin sensors: call plugin compute and apply cutoff
static void compute_plugin_sensors(const mjModel* m, mjData* d, mjtStage stage) {
  if (!m->nplugin) {
    return;
  }

  const int nslot = mjp_pluginCount();
  for (int i=0; i < m->nplugin; i++) {
    const int slot = m->plugin[i];
    const mjpPlugin* plugin = mjp_getPluginAtSlotUnsafe(slot, nslot);
    if (!plugin) {
      mjERROR("invalid plugin slot: %d", slot);
    }

    // check if plugin is a sensor plugin matching this stage
    if (!(plugin->capabilityflags & mjPLUGIN_SENSOR)) {
      continue;
    }
    // match if needstage equals stage, OR stage is POS and needstage is NONE
    int matches_stage = (plugin->needstage == stage) ||
                        (stage == mjSTAGE_POS && plugin->needstage == mjSTAGE_NONE);
    if (!matches_stage) {
      continue;
    }

    if (!plugin->compute) {
      mjERROR("`compute` is a null function pointer for plugin at slot %d", slot);
    }

    // call stage-specific preparation if needed
    // TODO(b/247107630): add a flag to allow plugin to specify whether it actually needs this
    if (stage == mjSTAGE_VEL && !d->flg_subtreevel) {
      mj_subtreeVel(m, d);
    } else if (stage == mjSTAGE_ACC && !d->flg_rnepost) {
      mj_rnePostConstraint(m, d);
    }

    plugin->compute(m, d, i, mjPLUGIN_SENSOR);

    // apply cutoff to all sensors attached to this plugin
    for (int j=0; j < m->nsensor; j++) {
      if (m->sensor_type[j] == mjSENS_PLUGIN &&
          m->sensor_plugin[j] == i &&
          m->sensor_needstage[j] == stage) {
        apply_cutoff(m, j, d->sensordata + m->sensor_adr[j]);
      }
    }
  }
}


// position-dependent sensors
void mj_sensorPos(const mjModel* m, mjData* d) {
  int nsensor = m->nsensor;
  int nusersensor = 0;

  // disabled sensors: return
  if (mjDISABLED(mjDSBL_SENSOR)) {
    return;
  }

  // sleep filtering
  int sleep_filter = mjENABLED(mjENBL_SLEEP) && d->nbody_awake < m->nbody;

  // process sensors matching stage
  for (int i=0; i < nsensor; i++) {
    mjtSensor type = (mjtSensor) m->sensor_type[i];

    // skip sleeping sensor
    if (sleep_filter && mj_sleepState(m, d, mjOBJ_SENSOR, i) == mjS_ASLEEP) {
      continue;
    }

    // skip sensor plugins -- these are handled after builtin sensor types
    if (type == mjSENS_PLUGIN) {
      continue;
    }

    if (m->sensor_needstage[i] == mjSTAGE_POS) {
      int adr = m->sensor_adr[i];
      mjtNum* sensordata = d->sensordata + adr;

      if (type == mjSENS_USER) {
        // clear result, compute later
        mju_zero(sensordata, m->sensor_dim[i]);
        nusersensor++;
      } else {
        compute_or_read_sensor(m, d, i, sensordata);
      }
    }
  }

  // fill in user sensors if detected
  if (nusersensor) {
    compute_user_sensors(m, d, mjSTAGE_POS);
  }

  // compute plugin sensor values
  compute_plugin_sensors(m, d, mjSTAGE_POS);
}


// velocity-dependent sensors
void mj_sensorVel(const mjModel* m, mjData* d) {
  int nusersensor = 0;

  // disabled sensors: return
  if (mjDISABLED(mjDSBL_SENSOR)) {
    return;
  }

  // sleep filtering
  int sleep_filter = mjENABLED(mjENBL_SLEEP) && d->nbody_awake < m->nbody;

  // process sensors matching stage
  for (int i=0; i < m->nsensor; i++) {
    // skip sensor plugins -- these are handled after builtin sensor types
    if (m->sensor_type[i] == mjSENS_PLUGIN) {
      continue;
    }

    // skip sleeping sensor
    if (sleep_filter && mj_sleepState(m, d, mjOBJ_SENSOR, i) == mjS_ASLEEP) {
      continue;
    }

    if (m->sensor_needstage[i] == mjSTAGE_VEL) {
      mjtSensor type = m->sensor_type[i];
      int adr = m->sensor_adr[i];
      mjtNum* sensordata = d->sensordata + adr;

      if (type == mjSENS_USER) {
        // call mj_subtreeVel for user sensors
        if (!d->flg_subtreevel) {
          mj_subtreeVel(m, d);
        }

        // clear result, compute later
        mju_zero(sensordata, m->sensor_dim[i]);
        nusersensor++;
      } else {
        compute_or_read_sensor(m, d, i, sensordata);
      }
    }
  }

  // fill in user sensors if detected
  if (nusersensor) {
    compute_user_sensors(m, d, mjSTAGE_VEL);
  }

  // trigger computation of plugins
  compute_plugin_sensors(m, d, mjSTAGE_VEL);
}


// acceleration/force-dependent sensors
void mj_sensorAcc(const mjModel* m, mjData* d) {
  int nusersensor = 0;

  // disabled sensors: return
  if (mjDISABLED(mjDSBL_SENSOR)) {
    return;
  }

  // sleep filtering
  int sleep_filter = mjENABLED(mjENBL_SLEEP) && d->nbody_awake < m->nbody;

  // process sensors matching stage
  for (int i=0; i < m->nsensor; i++) {
    // skip sleeping sensor
    if (sleep_filter && mj_sleepState(m, d, mjOBJ_SENSOR, i) == mjS_ASLEEP) {
      continue;
    }

    // skip sensor plugins -- these are handled after builtin sensor types
    if (m->sensor_type[i] == mjSENS_PLUGIN) {
      continue;
    }

    if (m->sensor_needstage[i] == mjSTAGE_ACC) {
      mjtSensor type = m->sensor_type[i];
      int adr = m->sensor_adr[i];
      mjtNum* sensordata = d->sensordata + adr;

      if (type == mjSENS_USER) {
        // call mj_rnePostConstraint for user sensors
        if (!d->flg_rnepost) {
          mj_rnePostConstraint(m, d);
        }

        // clear result, compute later
        mju_zero(sensordata, m->sensor_dim[i]);
        nusersensor++;
      } else {
        compute_or_read_sensor(m, d, i, sensordata);
      }
    }
  }

  // fill in user sensors if detected
  if (nusersensor) {
    compute_user_sensors(m, d, mjSTAGE_ACC);
  }

  // trigger computation of plugins
  compute_plugin_sensors(m, d, mjSTAGE_ACC);
}


//-------------------------------- energy ----------------------------------------------------------

// position-dependent energy (potential)
void mj_energyPos(const mjModel* m, mjData* d) {
  int padr;
  mjtNum dif[3], quat[4], stiffness, x;

  // init potential energy:  -sum_i body(i).mass * mju_dot(body(i).pos, gravity)
  d->energy[0] = 0;
  if (!mjDISABLED(mjDSBL_GRAVITY)) {
    for (int i=1; i < m->nbody; i++) {
      d->energy[0] -= m->body_mass[i] * mju_dot3(m->opt.gravity, d->xipos+3*i);
    }
  }

  int sleep_filter = mjENABLED(mjENBL_SLEEP) && d->nbody_awake < m->nbody;

  // add joint-level springs
  if (!mjDISABLED(mjDSBL_SPRING)) {
    int nbody = m->nbody;
    for (int b=1; b < nbody; b++) {
      if (sleep_filter && d->body_awake[b] != mjS_AWAKE) continue;

      int jnt_start = m->body_jntadr[b];
      int jnt_end = jnt_start + m->body_jntnum[b];
      for (int j=jnt_start; j < jnt_end; j++) {
        stiffness = m->jnt_stiffness[j];
        const mjtNum* poly = m->jnt_stiffnesspoly + mjNPOLY*j;
        if (stiffness == 0 && mju_isZero(poly, mjNPOLY)) {
          continue;
        }
        padr = m->jnt_qposadr[j];

        switch ((mjtJoint) m->jnt_type[j]) {
        case mjJNT_FREE:
          mju_sub3(dif, d->qpos+padr, m->qpos_spring+padr);
          x = mju_norm3(dif);
          d->energy[0] += mju_polyPotential(stiffness, poly, x, mjNPOLY, 0);
          // continue with rotations
          padr += 3;
          mjFALLTHROUGH;

        case mjJNT_BALL:
          // convert quaternion difference into angular "velocity"
          mju_copy4(quat, d->qpos+padr);
          mju_normalize4(quat);
          mju_subQuat(dif, d->qpos + padr, m->qpos_spring + padr);
          x = mju_norm3(dif);
          d->energy[0] += mju_polyPotential(stiffness, poly, x, mjNPOLY, 0);

          break;

        case mjJNT_SLIDE:
        case mjJNT_HINGE:
          x = d->qpos[padr] - m->qpos_spring[padr];
          d->energy[0] += mju_polyPotential(stiffness, poly, x, mjNPOLY, 0);
          break;
        }
      }
    }
  }

  // add tendon-level springs
  if (!mjDISABLED(mjDSBL_SPRING)) {
    for (int i=0; i < m->ntendon; i++) {
      // skip sleeping or static tendon
      if (sleep_filter && mj_sleepState(m, d, mjOBJ_TENDON, i) != mjS_AWAKE) {
        continue;
      }

      stiffness = m->tendon_stiffness[i];
      const mjtNum* poly = m->tendon_stiffnesspoly + mjNPOLY*i;
      mjtNum length = d->ten_length[i];

      // compute spring displacement x
      mjtNum lower = m->tendon_lengthspring[2*i];
      mjtNum upper = m->tendon_lengthspring[2*i+1];
      x = (length > upper) ? length - upper : (length < lower) ? length - lower : 0;

      // add potential energy
      d->energy[0] += mju_polyPotential(stiffness, poly, x, mjNPOLY, 0);
    }
  }

  // add flex-level springs for dim=1
  if (!mjDISABLED(mjDSBL_SPRING)) {
    for (int i=0; i < m->nflex; i++) {
      stiffness = m->flex_edgestiffness[i];
      if (m->flex_rigid[i] || stiffness == 0 || m->flex_dim[i] > 1) {
        continue;
      }

      // process non-rigid edges of this flex
      int flex_edgeadr = m->flex_edgeadr[i];
      int flex_edgenum = m->flex_edgenum[i];
      for (int e=flex_edgeadr; e < flex_edgeadr+flex_edgenum; e++) {
        if (!m->flexedge_rigid[e]) {
          mjtNum displacement = m->flexedge_length0[e] - d->flexedge_length[e];
          d->energy[0] += 0.5*stiffness*displacement*displacement;
        };
      }
    }
  }

  // mark as computed
  d->flg_energypos = 1;
}


// velocity-dependent energy (kinetic)
void mj_energyVel(const mjModel* m, mjData* d) {
  mj_markStack(d);
  mjtNum *vec = mjSTACKALLOC(d, m->nv, mjtNum);

  // kinetic energy:  0.5 * qvel' * M * qvel
  mj_mulM(m, d, vec, d->qvel);
  d->energy[1] = 0.5*mju_dot(vec, d->qvel, m->nv);

  mj_freeStack(d);

  // mark as computed
  d->flg_energyvel = 1;
}
